Used Machine Tools in Bavaria, Germany

1999 Wuko installation machine
- Manufacturer: Wuko
Used and well-maintained Wuko double-sided erector with cross shear (without meter counter), machine with red motor, The machine has been professionally repaired, inspected, and cleaned and is fully functional....
Hohenbrunn, Germany
1985 Wuko installation machine
- Manufacturer: Wuko
Used double-sided Wuko standing seam roofing machine, 230 V, strip width approx. 250–1000 mm, seam height up to max. 60 mm, weight approx. 95 kg, with cross-cut and longitudinal shears (without meter counter), ma...
Hohenbrunn, Germany
Trusted Seller
WMW BT 2
- Manufacturer: WMW
- Model: BT 2
Control: conventional - | Bore capacity in steel (diameter): mm | Throat: mm | Bore stroke: mm | Total power requirement: kW | Weight of the machine approx.: t | Dimensions of the machine approx.: m
Günzburg, Germany
Thread cutting machine Ridgid 535
- Manufacturer: Ridgid
Used Ridgid 535 threading machine Accessories: 1 set of 1/2" - 3/4" dies 1 set of 1" - 2" dies Manual cutting head Machine untested, in its current condition, i.e., we will not overhaul the machine!
Hohenbrunn, Germany
1978 Schlebach Piccolo folding machine
- Manufacturer: Schlebach
Used Schlebach folding machine, in a wooden crate. Machine is sold as is, with age-related wear and tear, without functionality testing.
Hohenbrunn, Germany
Auction
ROMI - M510 - 2002 - Cycle-controlled lathe
- Manufacturer: Romi
- Spindle bore: 63.5 millimeter
machine Cycle lathe data Dimensions Electrical details
Wassertrüdingen, Germany
Visit Auction Website
Auction
2007 GILDEMEISTER CTX 420 linear CNC lathe
- Manufacturer: Gildemeister
- Model: CTX 420
Processing hours 7034 h
Wassertrüdingen, Germany
Visit Auction Website
Auction
1999 TRAUB TNA 400 CNC lathe
- Manufacturer: Traub
- Model: TNA400
Tool disc turret 12 places VDI 40, travel X/Z 285.750 mm, Knoll VRF 150/750 vacuum filter, BJ. 1999 Coolant preparation, Sartorius oil mist separator, machine oil drip pan
Reichertshofen, Germany
Visit Auction Website
1998 Geka RM 50 rotary machine
- Manufacturer: Geka
Used Geka three-roll rotary cutter with folding groove and wire insertion grooves. The machine will be professionally repaired, inspected, and cleaned, and will then be fully functional. A test run will be perf...
Hohenbrunn, Germany
2017 Schröder AKV swivel bending machine
- Manufacturer: Schroeder
Used Schröder swing bending machine with pneumatic bending jaw support (Compressed air required) with manual Knoll roller shear, with Knoll profiling and closing head The machine will be professionally repaired...
Hohenbrunn, Germany
Beading machine Fasti 401/63/1.25
- Manufacturer: Fasti
Used manual Fasti beading machine with stop plate and 3 sets of rollers. The machine will be professionally repaired, inspected, and cleaned, and will then be fully functional. A test run will be performed.
Hohenbrunn, Germany
1970 Combination rounding and beading machine 1000mm
- Manufacturer: Beutler
Used 3-roll bending machine, with beading device 1080mm, bar diameter 14mm, Machine is sold as is, without warranty.
Hohenbrunn, Germany
1998 Prinzing RM 52/103 rotary machine
- Manufacturer: Prinzing
Used Prinzing 3-roll rolling machine, with wire insertion grooves, folding groove, back roller manual feed, wheel with scale. The machine will be professionally repaired, tested, and cleaned, and will then be f...
Hohenbrunn, Germany
1987 Biegemaster BMTH long bending machine
- Manufacturer: Biegemaster
The used 8-meter Biegemaster long-reach bending machine offers a robust solution for the precise bending of sheet metal over long lengths. The new control system with memory and adjustable bending parameters ensu...
Hohenbrunn, Germany
1998 round bending machine Coil-Tec SM
- Manufacturer: Coil-Tec
Round bending machine, with U-frame, folding nut, mobile Machine is repaired, inspected, cleaned by a professional and is then fully functional. Test run is performed.
Hohenbrunn, Germany