Used Machine Tools in Saxony, Germany

ALLMATIC NC high-pressure clamps

• Manufacturer: ALLMATIC

NC high-pressure clamp with hydraulic spindle ALLMATIC - NC LC125 used, tested !

ALLMATIC NC high-pressure clamps

• Manufacturer: ALLMATIC

NC high-pressure clamp with hydraulic spindle ALLMATIC - NC LC125 including one set of stepped jaws ! used, tested !

WMW PS 400x4

• Manufacturer: WMW

Face Slidewith 2x 4 pcs clamping chucks (internal/outer) clamping travel 45mm clamping area: internal dia. 120-400mm and outer diameter 120-330mm flangeintake dia. size 160mm equipment: chuck key

WMW milling head

• Manufacturer: WMW

Milling head , drill head , angle head WMW, WEMA Engelsdorf UA1 360° rotatable in two planes Hollow shaft ( drive ): Ø 28 mm, wedge width: 6 mm used, tested !

BILZ leveling shoe

Leveling shoe, machine foot, wedge foot, free-standing, 4 pieces BILZ PK 4/1 used, tested !

BILZ leveling shoe

Leveling shoe, machine foot, wedge foot, free-standing, 2 pieces BILZ 4-VRC New !

FEIN tin snips

• Manufacturer: Fein

Sheet metal shears, high-frequency sheet metal shears, high-frequency tool, high-frequency machines FEIN QSz 838 0.24 kW 1850 strokes/min 265 V 3AC 200 Hz approx. 3.5 m connection cable used, tested!

DECKEL clamping drive

• Manufacturer: Deckel / Maho

Clamping drive, manual with fine adjustment DECKEL spare part for milling machine DECKEL KF12 ! used, tested !

DECKEL trapezoidal threaded spindle

• Manufacturer: Deckel / Maho

Trapezoidal threaded spindle COVER Thread: Ø 24 mm spare part for milling machine DECKEL KF12 ! used, tested !

RSF-ELEKTRONIK length measuring system

Length measuring system RSF-ELEKTRONIK MSA6706 83577408 approx. 0.6 m connection cable Spare part e.g. for machining center MAZAK AJV25/405 ! used, tested !

HEIDENHAIN length measuring system

Length measuring system HEIDENHAIN LS486C ID 329 991-22 approx. 1,5 m connection cable Spare part e.g. for machining center HECKERT CWK400 D ! used, tested !

PAULSTRA all-metal damper

• Manufacturer: PAULSTRA

All-metal damper, machine foot set, leveling foot set, vibration isolator PAULSTRA V1H752-11 Material (all-metal damping pad) CrNi steel wire All-metal damper set consists of 4 feet ! used, tested !

WMW SP 5040x2230x460

• Manufacturer: WMW

Machine table can be used as clamping plate. - material - cast steel - clamping surface 4100 x 2230mm - outlet part lateral (at the side) = W: 2110 x L: 1040mm T-slots according to DIN 650 - b=54.0; c=21.0; h=55....

bolster plate AP 2500x1250x100 (Nr.1-2)

Cast steel The plates are machined before the T-slot with 75mmx60mm(recessed) Table surface 2530mm X 1245 mm Longitudinal slot: Number: 5 Size:a=32, h=53, b=54, c=23mm Center distance 250mm 2 slots Chamfered 8 th...

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH 200 x 3 ( DH200x3 ) TGL 30-2333 centering Ø: 107 / 103 mm, depth: 17 mm ( conical ) used, tested !