Used Machine Tools in Saxony, Germany

GESAU Drill

• Manufacturer: Pagus

Step drill with internal cooling GESAU ( Ø14,5x23,5/120°x25x110 ) with internal cooling ! New !

WMW service unit

• Manufacturer: WMW

Service unit, machine control WMW SERVICE UNIT III AUERBACH Fkr SRS 250/1 ( AUERBACHFkrSRS250/1 ) approx. 6 m connection cable picture similar ! used, tested !

PAGUS mechanical clutch

• Manufacturer: Pagus

Mechanical clutch PAGUS Hollow shaft 1: Diameter: Ø 24 mm 1 groove Hollow shaft 2: Diameter: Ø 21 / 25 mm 4 grooves spare part for milling machine FRITZ WERNER FV1 ! used, tested !

WMW SP 5040x2230x460

• Manufacturer: WMW

Machine table can be used as clamping plate. - material - cast steel - clamping surface 4100 x 2230mm - outlet part lateral (at the side) = W: 2110 x L: 1040mm T-slots according to DIN 650 - b=54.0; c=21.0; h=55....

WMW milling head

• Manufacturer: WMW

Milling head , drill head , angle head WMW, WEMA Engelsdorf UA1 360° rotatable in two planes Hollow shaft ( drive ): Ø 28 mm, wedge width: 6 mm used, tested !

BILZ leveling shoe

Leveling shoe, machine foot, wedge foot, free-standing, 4 pieces BILZ PK 4/1 used, tested !

BILZ leveling shoe

Leveling shoe, machine foot, wedge foot, free-standing, 2 pieces BILZ 4-VRC New !

PAGUS all-metal damper

• Manufacturer: Pagus

All-metal damper, machine foot set, leveling foot set, vibration isolator, 4 pieces PAGUS Ø 25 x 20 mm Threaded hole: M6 x 1.0 Depth: 10 mm 2x hole: Diameter: Ø 7 / 12 mm ( for hexagon socket screws ) Material: S...

DECKEL clamping drive

• Manufacturer: Deckel / Maho

Clamping drive, manual with fine adjustment DECKEL spare part for milling machine DECKEL KF12 ! used, tested !

DECKEL trapezoidal threaded spindle

• Manufacturer: Deckel / Maho

Trapezoidal threaded spindle COVER Thread: Ø 24 mm spare part for milling machine DECKEL KF12 ! used, tested !

bolster plate AP 2500x1250x100 (Nr.1-2)

Cast steel The plates are machined before the T-slot with 75mmx60mm(recessed) Table surface 2530mm X 1245 mm Longitudinal slot: Number: 5 Size:a=32, h=53, b=54, c=23mm Center distance 250mm 2 slots Chamfered 8 th...

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH 200 x 3 ( DH200x3 ) TGL 30-2333 centering Ø: 107 / 103 mm, depth: 17 mm ( conical ) used, tested !

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW, ROTO RECORD DH 250 x 3 ( DH250x3 ) TGL 30-2332 used, tested !

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH 250 x 3 ( DH250x3 ) TGL 30-2333 used, tested !

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chucks, three-jaw chucks, power chucks, wedge hook chucks WMW ( DKRDA250x3 ) Jaws individually adjustable by toothing ! with accessories ! used, tested !