Used Industrial Automation in Bern, Switzerland

pneumatic cylinders

pneumatic cylinders

FEINTOOL GKP-F-40

• Manufacturer: FEINTOOL

Slide pressure: 40 to | Hydraulic counterpressure: 0.5 - 12 to | Hydraulic hold down: 2 - 12 to | Fixed table length: 300 mm | Width: 1500 mm | From: 36 mm | Up to: 90 mm | T-channel width: 12 mm | Maximum thick...

FEINTOOL GKP-F-40

• Manufacturer: FEINTOOL

Slide pressure: 40 to | Hydraulic counterpressure: 0.5 - 12 to | Hydraulic hold down: 2 - 12 to | Fixed table length: 300 mm | Width: 400 mm | From: 110 mm | Up to: 180 mm | T-channel width: 12 mm | Maximum thic...

LIGHT CURTAIN “SICK” TYPE C-4000

L=1000 mm.

DC MOTOR WITH PERMANENT MAGNET “ESTAN” TYPE GfmO 8/4

180V – 75W – 0,52A – 3000min-1 – IP44

MOTOR “GRUNDFOS” TYPE MG 100 LA4

• Manufacturer: Grundfos
• Model: MG100LA4

220/380V – 50Hz – 0.7/5.6A – 1410 min-1 Weight: 18 kg

ELECTRIC MOTOR “D” TYPE DP80B

380V – 0,6/0,8 Kw – 50Hz – 1400/2800 min-1

2020 FANUC A06B-0227-B300 Alpha IF 8/3000

• Manufacturer: Fanuc
• Model: A06B-0227-B300

Rotation speed: 3000 t/min | Voltage 50 hz 3x: 220 Volt | Engine power: 2 kW | Weight: 15 kg

2011 DRYPOINT RA 100

• Manufacturer: DRYPOINT

Nominal volume flow: 630 m3/h | Max. inlet temperature: 70 °C | Machine's weight about: 94 kg | Length: 625 mm | Width: 555 mm | Height: 975 mm

2020 FANUC A06B-0143-B300 Alpha12/3000

• Manufacturer: Fanuc
• Model: A06B-0143-B300

Rotation speed: 3000 t/min | Voltage 50 hz 3x: 220 Volt | Engine power: 2 kW | Weight: 15 kg

2012 HSS DKB 110

• Manufacturer: HSS

Filling quantity max.: 4 kg | Cooling capacity: 11 kW | Maximum pressure: 30 bar | Voltage 50 hz 3x: 400 Volt | Total installed power: 6.5 kW | Machine's weight about: 100 kg | Length: 800 mm | Width: 800 mm | H...