Building Filters
- Trusted Seller
Daewoo 4-Wheel Front Stacker
- Manufacturer: Daewoo
- Lifting capacity: 12,000 kg
- Maximum lift height: 3.54 m
All technical data is real data Comprehensive technical inventory Condition and value are precisely determined Expertise in technology and consulting On-time logistics Immediate availability
- Trusted SellerAuction
Gas forklift (52) Daewoo
- Manufacturer: Daewoo
Nameplate not legible, load capacity 3,000 kg, hydraulic sideshift, duplex mast
Uhingen, GermanyVisit Auction Website - Trusted Seller
Germany - Trusted Seller
DAEWOO DDAE 10500DSE-3G
- Manufacturer: Daewoo
- Model: DDAE10500DSE-3G
- Horsepower: 15 hp
- Fuel type: diesel
Floor standing machine with 4x wheels, 2x steerable and braked power: at max. voltage = 400V - 8,1kVA and 230V - 7,3 kVA at nominal voltage = 440V - 7,5 kVA and 230V - 6,7 kVA current 400V - 16A and 230V - 32A Vo...
Leipzig, Germany - Auction
Daewoo - 2025 - DAS100 - Street sweeper
- Manufacturer: Daewoo
- Model: DAS
Working width: 1900mm; Reading hours: 0 hr; battery charger; Battery capacity 48V/100AH 4pcs; container capacity 180 liters; water tank 80 liters; unused; packing size 2115 x 1325 x 2110mm; horn; 4 LED bulbs at ...
Hamburg, GermanyVisit Auction Website - Trusted Seller
2005 DAEWOO PUMA TT 2000 SY
- Manufacturer: Daewoo
- Model: Puma TT2000
- Power requirement: 60 kW
This 3-axis DAEWOO PUMA TT 2000 SY was manufactured in 2005. It features a turning diameter over bed of 800 mm and a maximum bar diameter of 65 mm. Equipped with a Fanuc 18i-TB control system, it offers spindle s...
Germany - Trusted Seller
1996 Daewoo Duck Sung M/C 600Sx12000L
- Manufacturer: Daewoo
- Throat depth: 645 mm
Hydr. Pressbrake 6000-300 - jib arm length= 720mm - incl. back gauge (without crowning system) adjustment travel horizontal/vertical: 680/200mm motoric Optionally, two of these press brakes can be offered - also ...
Leipzig, Germany 
DAEWOO DAFL 50 A
- Manufacturer: Daewoo
- Model: DAFL50A
- Aisle space: 19.69 in
Daewoo floor cleaning machine: Packed with battery and charger Theoretical surface cleaning: Output: 2000 m²/h Suction width: 850 mm Cleaning width: 510 mm Max. working area incline: 2% Fresh/waste water tank vol...
Velen, Germany
DAEWOO DAAX 500 L
- Manufacturer: Daewoo
- Model: DAAX500L
- Horsepower: 10 hp
- Maximum pressure: 14 bar
Control: conventional | Delivery: ab Lager | Power: 7,5 KW | Receiver: 500 L | Feed pressure: 14 bar | Liter capacity: 995 l | Connected load frequency: 400 V | Weight of the machine ca.: 200 kg | Dimensions of ...
Velen, Germany
DAEWOO DDAE10500DSE-3G
- Manufacturer: Daewoo
- Model: DDAE10500DSE-3G
- Horsepower: 15 hp
- Voltage: 400 V
Diesel generator with: - equipped with electric start. - Equipped with automatic voltage regulator. - Air cooled - Mobile. - Direct injection - Low oil level alarm with auto-stop function.
Velen, Germany
2000 Daewoo Puma 230
- Manufacturer: Daewoo
- Model: Puma 230
10-station turret, dragged tailstock, three-jaw chuck Ø 254 mm, tool measuring arm, chip conveyor, coolant device, main spindle with new bearings, flat guides, accessories,
Wiesbaden, Germany
2000 Daewoo D 25 S-3 FZ72389
- Manufacturer: Daewoo
- Model: D25S-3
- Lifting capacity: 2,500 kg
- Mast type: simplex
Capacity (kg): 2500 | Lift height (mm): 3850 | Mast type: Simplex | Overall height (mm): 2600 | Free lift (mm): 150 | Tyres: vorn: SE-Reifen hinten: SE-Reifen | Additional hydraulics complete (vehicle): AH1 | Ad...
2002 Daewoo 250LC-5
- Manufacturer: Daewoo
- Model: 250LC-5
- Horsepower: 162 hp
- Hours: 9,700 h
Working hours: 9.700 | U/c: 50 % good | Including: hammer line, backhoe
Königswinter, Germany
Mörfelden-Walldorf, Germany
2022 DAEWOO DDAE10500DSE-3G #1053-003395
- Manufacturer: Daewoo
- Model: DDAE10500DSE-3G
- Power: 11.19 kW
- Fuel type: diesel
Diesel fuel emergency generator, Power 8.1 KVA, Socket connections: 1 x 400V - 16A, 1 x 230V - 32A, 1 x 230V - 16A, with electric starter, with battery: 32 AH, noise level: 72-74 dBA (7M), automatic voltage regul...
Krefeld, Germany
Daewoo Puma 2500 CNC Lathe
- Manufacturer: Daewoo
- Model: Puma 2500
Good condition Daewoo Puma 2500 CNC Lathes manufactured in 2004. Located in Germany and other countries. Click request price for more information.
Germany
