Used Processing in New Jersey, USA

Carbon Steel Kinney/Tuthill KDP-800 Pump-Vacuum - IPP# 221281

• Manufacturer: Tuthill

screw type dry seal vacuum pump manufactured by Kinney/Tuthill 0.05 ultimate pressure No oil or water with process contact and quiet operation less than 85 dB(A) 4" suction flange, 2" discharge flange Requires 2....

Pump-Vacuum - IPP# 208379

• Manufacturer: Wiegand

Steam injection 4 effects with ceramic pistons and VICARB Carbon Block Heat Exchanger, Serial Number 1296, rated -1/3 bar @ 150 degrees C Service Side, volume 16 liter; -1/3 bar @ 150 degrees C process side, volu...

1997 MIZUHO INDUSTRIAL PVTS-5UN

• Manufacturer: MIZUHO INDUSTRIAL

Used Mizuho Industrial Model PVTS-5UN vacuum jacketed triple-action high shear mixer. 6.5" diameter X 8" deep stainless steel mixing chamber. Manual hand lift of mixer head and manual tilt of chamber.

TALLERES MIRALLES MPV60

• Manufacturer: Talleres Miralles

Comprehensively tested, used Talleres Miralles type MPV60 stainless steel twin shaft planetary mixer. Manufacturer: Talleres Miralles. Also includes: -Hydraulic Powrpack for raise and lower. -A mobile stainless s...

OMAS T Mix 5

• Manufacturer: Omas

Comprehensively tested, used Omas T Mix 5 approximately 5 litre stainless steel jacketed emulsifier mixer. Manufacturer: Omas. Also includes: -Top mounted central homogenizer type mixer driven by elec. motor. -Ma...

ROSS LDM2

• Manufacturer: Ross
• Model: LDM2

Used Stainless Steel Ross Planetary Mixer Manufacturer: Ross Model: LDM2

GREAVES VLS10

• Manufacturer: GREAVES

Comprehensively tested, used Greaves model VLS 10 stainless steel mixer. Manufacturer: Greaves. Also includes: -Pneumatically operated raise and lower giving approximately 190cm total height. -Stainless steel lid...

Carbon Steel Kinney/Tuthill KDP-800 Pump-Vacuum - IPP# 221215

• Manufacturer: Tuthill

screw type dry seal vacuum pump 0.05 ultimate pressure No oil or water with process contact and quiet operation less than 85 dB(A) Requires 2.6 gpm cooling water Direct driven by ac motor`

Carbon Steel Kinney/Tuthill KDP-800 Pump-Vacuum - IPP# 221214

• Manufacturer: Tuthill

screw type dry seal vacuum pump 0.05 ultimate pressure No oil or water with process contact and quiet operation less than 85 dB(A) Requires 2.6 gpm cooling water Direct driven by ac motor

IPP# 602135, Solid State Polymerization Plant Polymers - Fibres and Plastics

70 TPD PET - SSP Plant It is a facility that manufactures high-IV PET chips suitable for various bottle production by reacting low-IV PET chips produced in a melt polymerization process in a solid state to have h...

Stainless Steel 304 Centrifuge-Disc Bowl - IPP# 238437

• Manufacturer: Disco

continuous disc bowl centrifuge Rated 1 bar @ 50 deg C Sanitary construction for food processing Max feed temp 95 deg C Solids density: 1.42 kg/dm3, Heavy liquid density: 1.20 kg/dm3.Max feed temp 95 deg C. Motor...

Centrifuge-Disc Bowl 2.2 kW (3 HP) - IPP# 94979

• Manufacturer: Westfalia

Designed for 5 gpm coolant flow rate, 7 gpm for oil. Batch system includes (1) 250 gal dirty coolant tank; (1) 250 gal clean coolant tank; (1) 250 gal dirty oil tank. Clean oil designed to discharge to barrels. S...

Packed Column - IPP# 222790

• Manufacturer: Mechanica Sarda

300 kg/Hr, recovered VCM stripping system, designed to stripping unreacted VCM from PVC slurry process reducing vent gas to less than 1 ppm VCM. This system is EVC Technology, and can be used to strip volatiles f...

Packed Column - IPP# 222789

• Manufacturer: Mechanica Sarda

300 kg/Hr, recovered VCM stripping system, designed to stripping unreacted VCM from PVC slurry process reducing vent gas to less than 1 ppm VCM. This system is EVC Technology, and can be used to strip volatiles f...

Trane RTHB255 FLEOSLWPOOOUNC4LF2LFOOQUO Low Temp Chiller - IPP# 216001

• Manufacturer: Trane

CentraVac Low temperture Series R chiller Requires 705 lbs. inlet at 33.8 degrees F, and outlet at 25 degrees F. (4 pass) Condenser NB # 4401, serial # 44010, built in 1996, rated for 300 psi at 300 degrees F.( 2...