Used Processing in Minnesota, USA

Buehler Samplmet-2 Abrasive Lab Saw

• Manufacturer: Buehler

Good condition Buehler Samplmet-2 metallographic wet-saw, with complete recirculation system and dual clamps. This saw is refurbished, cleaned, tested and ready to ship. The Samplmet-2 takes up to a 9″ diamond ...

Dry Coolers Five Fan Closed Loop Cooling Fans (2 Available)

- Dry Cooler 5 Fan units. - 3” copper in & Out - Both units are in working condition - Both fan units, test run good, motor starters are in the end of the unit. - Both units have been pressure tested.and pa...

Keith Kiln - 16 cuft - Periodic Electric, 1200°C

• Manufacturer: Keith

Periodic Electric 1200°C Operational Since 1997-2001

Mesh Belt Austemper Line Available-330 Pounds/Hour

• Manufacturer: AFC

Manufactured by AFC-Holcroft at their MATTSA licensed facility this is a gas fired mesh belt austemper line with a capacity of 150kg/hour (330 pounds per hour). This a complete line with automated loading system,...

-105°F to 375°F Temperature Test Chamber

• Manufacturer: Cincinnati Sub-Zero

DESCRIPTION: Stainless Steel Lined Temperature Test Chamber complete with Single Swing-Out Front Door, Wilkerson Compressed Air Dryer for Dry Air Purge, and Liquid Nitrogen Boost Capability. INSTRUMENTATION: ...

Can Eng 3500 Pound/Hour Mesh Belt Line

• Manufacturer: CAN-ENG

Manufactured by Can Eng of Niagara Falls, Canada this is a gas fired mesh belt furnace line with a rated capacity of 3500 pounds per hour. Manufactured in 2002. - Belt Width 48” - High heat furnace is capable of ...

Can Eng 1500 Pound Per Hour Mesh Belt Line

• Manufacturer: CAN-ENG

Can Eng Mesh Belt furnace line consisting of a Metro loading system, prewash (dunk/spray), hardening furnace, oil quench, post wash, mesh belt temper furnace and vibratory discharge. Approximately 6-8” clearance...

Cast Link Belt Lines (3 Available)

• Manufacturer: Link-Belt

This is a complete heat treat department of which the main feature are 3 Cast Link belt lines, each capable of 6,000 pounds/hour. Also included are 3 endothermic generators, spare parts, fire suppression system-i...

Inducto-Heat BSP5-100-3/10, 100 kW, 3/10 kHz

• Manufacturer: Inducto-Heat

Description: Inducto-Heat BSP5-100-3/10 Induction Heating Power Supply. Induction heating power supply rated at 100 kW with 3/10 kHz frequency range, complete with water system.

Ajax Magnathermic Magnescan II, Pacer -S10

• Manufacturer: Ajax Magnathermic

Description: Ajax Magnathermic Magnescan II Induction Hardening System with Pacer S-10 Power Supply. 60" single-spindle induction scanner equipped with a 150 kW, 3/10 kHz Ajax Magnathermic Pacer S-10 power supply...

2006 Leco TC40 Nitrogen/Oxygen Determinator

• Manufacturer: Leco

Description: Leco TC40 Nitrogen/Oxygen Determinator. Analytical instrument designed for precise determination of nitrogen and oxygen content in materials.

Surface Combustion Charge Car 30 x 48 System 1

• Manufacturer: Surface Combustion

Description: Surface Combustion Charge Car 30 × 48 System I. Double-ended, powered charge car complete with roller rail top.

16"W x 16"H x 13"L, Blue M CFD-10E-7 Bench Top Style, 1200°F, Electric

• Manufacturer: Lindberg/Blue M

Description: Blue M CFD-10E-7 Bench Top Style Oven, 16" W × 16" H × 13" L. Electric bench-top oven designed for uniform heating up to 1200°F. Unit has been tested and is ready to ship. Key Components & Featur...

16.5''W x 19.7"H x 18"L Blue M 206 Inert Gas Clean Room Cabinet Oven, 500°F, 208V Single Phase

• Manufacturer: Lindberg/Blue M

Description: Blue M Model 206 Inert Gas Clean Room Cabinet Oven, 16.5" W × 19.7" H × 18" L. Electric clean-room cabinet oven designed for inert gas operation and uniform heating up to 500°F (250°C). Key Component...

Ajax Tocco Magnethermic Steel Strip Heating System

• Manufacturer: Ajax Tocco

Manufactured by Ajax Tocco Magnethermic in August 2005 this is a Flat-Rolled Steel Strip Heating Machine which includes induction power supply (AJAX TOCCO) and heat station. - Input Voltage: 480V three-phase (sta...