Used Sanders

Powermatic, OES9138 Edge Sander, 3HP 3PH 230V

• Manufacturer: Powermatic
• Model: OES9138

The large 11-3/4" x 48" table on the OES9138 oscillating edge sander travels a full 8" in vertical height to accommodate most woodworking pieces. It will also tilt negative 5° and out to positive 45°. The cast ir...

Powermatic, OES9138 Edge Sander, 3HP 1PH 230V

• Manufacturer: Powermatic
• Model: OES9138

The large 11-3/4" x 48" table on the OES9138 oscillating edge sander travels a full 8" in vertical height to accommodate most woodworking pieces. It will also tilt negative 5° and out to positive 45°. The cast ir...

AEM 36" 1 Head HD Sander

• Manufacturer: AEM

Laguna, Pro 37″ Widebelt Sander

• Manufacturer: Laguna

This machine is equipped with 1 combination head. This means you can sand either using the drum or the sanding platen or both at the same time. Due to the large HP motor (20 HP) the machine is capable of dimensio...

Sanding Master GKSB-900 / 36" Widebelt Sander 220V (6480)

• Manufacturer: Sanding Master

(Better pictures will follow as soon as it stops raining here LOL) Sanding Master GKSB-900 / 36" Widebelt Sander 220V, 3ph Very nice condition and has been completely gone through All items are sold “AS IS” ...

6″ x 48″ Rockwell Belt and 10″ Disc Sander

• Manufacturer: Rockwell

Return To: Sanders Volt:230, Phase: 3 Good Condition

Northtech NT-MBS12-2T1R1OL Moulding Brush Sander

• Manufacturer: Northtech

Machine hp: 5.5 HP. | Direct drive (motor): Sanding Heads | Voltage, frequency: 230/460 Volt 60 Hz | Phase: 3 Phase | Amp requirement: 16.5/8.25 Amps | Configuration: 2 Top 1 Left 1 Right Opposing | 1st head: 1....

Northtech NT-RRS80B2 Round Rod Sander Double Belt

• Manufacturer: Northtech

The NT-RRS80B2 is a two head heavy duty sander specifically designed for round rods. It is a heavy-duty industrial grade sander that rolls the part against the sanding belts as it is fed though the machine. Varia...

BLACK AND DECKER BELT SANDER/ROCKWELL SANDER

• Manufacturer: Black+Decker

BLACK AND DECKER BELT SANDER/ROCKWELL SANDER

Safety Speed, 4375 Wide Belt Sander

• Manufacturer: Safety Speed

The 43″ Wide Belt Sander features a 75” belt, providing 25% more abrasive surface than the smaller 60” belt machines. The larger belt translates to increased capacity, less heat accumulation, less maintenance and...

Oakley H6 Edge Sander 2hp 3ph 220/440 ~ FRESH PAINT ~ (6066)

• Manufacturer: Oakley

Oakley H6 Edge Sander 2hp 3ph 220/440 This has been freshly painted with a hammertone paint The rear idler drum is not pictured but is included All items are sold "AS IS" If you have questions or need informati...

Heesemann MFA 8 Sander

• Manufacturer: Heesemann
• Model: MFA 8

Good condition Heesemann MFA 8 Sanders available between 2011 and 2019 years. Located in Germany and other countries. Click request price for more information.