Used Processing in Switzerland

Trusted Seller
2007 MECAIR 3001-100
- Manufacturer: MECAIR
Aspirated air: 3000 m3/min | Static pressure: 3400 Pa | Filter surface totally: 30 m2 | Nominal speed: 2850 t/min | Voltage 50 hz 3x: 400 Volt | Installed power: 6 kW | Weight: 300 kg | Length: 1200 mm | Width: ...
Brügg, Switzerland
Trusted Seller
2019 URRETXU PED EX 132
- Manufacturer: URRETXU
Machine's weight about: 300 kg | Length: 9500 mm | Width: 700 mm | Height: 1800 mm
Brügg, Switzerland
Trusted Seller
2019 URRETXU PED EX 132
- Manufacturer: URRETXU
Machine's weight about: 300 kg | Length: 9500 mm | Width: 700 mm | Height: 1800 mm
Brügg, Switzerland
Trusted Seller
2002 NETSTAL SYN 1500-460
- Manufacturer: Netstal
Clamping force: 150 to | Stroke volume: 201 cm3 | Ejector stroke: 150 mm | Ejector force: 49 kN | Pressure on material: 2218 bar | Screw diameter: 40 mm | From: 20 t/min | Up to: 300 t/min | Mould heating: 20 kW...
Brügg, Switzerland
Trusted Seller
2011 ELBARON RON/A 60 SV
- Manufacturer: ELBARON
Aspirated air: 720 m3/h | Voltage 50 hz 3x: 230 Volt | Total installed power: 0.328 kW | Weight: 22 kg | Length: 700 mm | Width: 470 mm | Height: 380 mm
Brügg, Switzerland
Trusted Seller
2013 KNOLL VRF 1000 / 3200
- Manufacturer: Knoll
Total capacity: 5800 l | Flow / duty: 1000 l/min | Voltage 50 hz 3x: 400 Volt | Total installed power: 61 kW | Length: 3200 mm | Width: 2120 mm | Height: 2735 mm | Water cooler: HSS
Brügg, Switzerland
Auction
2008 Turbo Technika Delta 250 GR 7/10 Overhead Conveyor Sand Blasting Machine
- Manufacturer: Delta
The blast wheel system was operated with round grain Inox 30, cabin dimensions 500x500x1000 mm, operating hours 2287 hours, weight estimated approx. 3500 kg, documents available, further details see photos
Solothurn, Switzerland
Visit Auction Website
Trusted Seller
2018 Brofind Solvent Recovery Plant
- Manufacturer: Brofind
Brofind Solvent Recovery Plant year 2018 Regenerative Thermal Oxidizer (RTO) Maximum airflow capacity: 30.000 m3/h (designed for one printing machine, used to be connected to Bobst and W&H flexo) Energy Consumpti...
Lugano, Switzerland
Trusted Seller
1993 Macchi coextruder
- Manufacturer: Macchi
Macchi coextruder year 1993 3 layers Dosing system: Doteco Grado, 3 units with 4 components each, centralized vacuum pump (retrofitted), all scales overhauled in 2024, new software, an external touch screen, neck...
Lugano, Switzerland
Trusted Seller
2010 Curioni 541
- Manufacturer: Curioni
Curioni 541 year 2010 For the production of paper bags with flat concealed handle unit and die cut / banana handle With Robatech hotmelt gluing unit (for the handle unit and bottom gluing system which can be also...
Lugano, Switzerland
Trusted Seller
1979 Hosokawa Alpine extruder
- Manufacturer: Alpine
Hosokawa Alpine extruder year 1979/80, made in Germany Monoextruder In 2002 was done a refurbishment (new screw cylinder complete, outer part of screw, PLAST CONTROL dosing system for 3 materials). For the produc...
Lugano, Switzerland
Trusted Seller
1962 W&H Tuber AM 1130/65
- Manufacturer: W&H
W&H Tuber AM 1130/65 year 1962 Flush cut 2-3 plies With 2 color in line flexo printer With photocell for preprinted material Overhauled in 2017 Visible in production Immediately available About Complete line for ...
Lugano, Switzerland
Trusted Seller
1965 G&H Bottomer Progress 525
- Manufacturer: GARTEMANN & HOLLMANN
GARTEMANN & HOLLMANN Bottomer Progress 525 year 1965 For the production of open mouth and valve sacks Manufactured sacks: from 1 to 5 layers (depending on the paper grammage. 80 gr is the suggested paper ) With ...
Lugano, Switzerland
Trusted Seller
2006 W&H Complete multiwall line: Tuber AM 2185, In line printer Flexa 820, Bottomer AD 2390 with Trans System 2 and W&H palletizer Arcomat 2
- Manufacturer: W&H
W&H Complete multiwall line: Tuber AM 2185, In line printer Flexa 820, Bottomer AD 2390 with Trans System 2 and W&H palletizer Arcomat 2 year 2006 In line printer 4 color Tuber W&H Transystem 1 with software SIMA...
Lugano, Switzerland
Trusted Seller
1973 W&H Triumph 1
- Manufacturer: W&H
- Model: TRIUMPH 1
W&H Triumph 1 year 1973 with in-line printer 5 colors and photocell Every year on machine is done maintenance and all worn-out parts are changed 1 ply Equipped with 5 colors In-line printer. The machine was equip...
Lugano, Switzerland