Used Processing in Hamburg, Germany

2007 GMM Litox-
- Manufacturer: GMM
- Model: Litox
5-axis bridge saw monoblock - steel walls (no need to build concrete walls) Tiltable head (5 axes) from 0° to 90° ø saw blade 825 mm Main motor 30 HP Variable speed drive (inverter) Complete with automatic progra...
Hamburg, Germany
1989 Arbes STH 140-25-
- Manufacturer: Arbes
Gang saw Maximum block size is 3000 x 1800 mm Maximum 26 blades Push rod stroke 750 mm Main motor has 55 kW and operates at approximately 65 strokes per minute. Lowering speeds range from 0 to 300 mm per hour. Wa...
Hamburg, Germany
2002 Marmo Meccanica LTH 7212-
- Manufacturer: Marmo Meccanica
- Model: LTH 7212
Edge polisher machine for straight and round edges Calibrator / water nose Chamfers inclined at 45° (diameter 120-130 mm) 7 polishing heads Additional lower chamfer inclined at 45° (diameter 120-130 mm) 2 rollers...
Hamburg, Germany
2010 Breton Smart cut NC 800-
- Manufacturer: Breton
- Model: Smart Cut
CNC machining center with 5-axis head Disc diameter 800 MAX. length mm 3500 MAX. width mm 2000 MAX. thickness mm 240 Machine configuration X-axis travel mm 3800 Y-axis travel mm 2800 Z-axis travel mm 550 Axis rot...
Hamburg, Germany
2020 Burkhardt Löffler CSA 569 I
- Manufacturer: Löffler
Semi-gantry bridge saw with a maximum saw blade size of 1600 mm Long travel 25 m x 4 m 6 workstations (1 long work table) including 6 digital cameras, optional support tables Machine is sold only with accessories...
Hamburg, Germany
2006 Donatoni QUADRIX DV
- Manufacturer: Donatoni
- Model: Quadrix
Bridge saw Rotatable sawblade holder (0–180°) for the following cuts: Rigid cuts Cross cuts Bevel cuts Shaped cuts Curved cuts Fixed table (3,500 x 2,100 mm) made of robust steel construction. Max. sawblade diame...
Hamburg, Germany
2009 BRETON Countourbreton NC 260 K 23-
- Manufacturer: Breton
- Model: NC260
CNC machining center 1-24 a new spindle was installed Tool magazine: 26 positions Steep taper, angle gear with saw blade and vacuum suction cup are supplied with the machine The machine is supplied with a 2nd ful...
Hamburg, Germany
2007 Donatoni QUADRIX Top 1100
- Manufacturer: Donatoni
- Model: Quadrix
CNC machining center with 5 interpolated axes CAD/CAM software WCAM Maximum saw blade diameter: 1,100 mm Z-axis travel: 800 mm Motor: 30 hp – 22 kW with ISO 50 taper, including frequency converter 0–180° rotatabl...
Hamburg, Germany
2007 GMM Litox 38-
- Manufacturer: GMM
- Model: Litox 38
CNC bridge saw with 5-axis head Saw blade diameter ø 825 mm Tilt table Main motor power 30 HP Variable speed drive (inverter) Tilt head (5 axes) from 0° to 90° Complete with automatic programs such as single cuts...
Hamburg, Germany
GMM Lexta 36 full-
- Manufacturer: GMM
- Model: Lexta 36
Bridge saw for granite - Refurbished with 6 months warranty. Installation and training can be carried out at an extra cost. Maximum horizontal stroke of the saw 3600 mm Maximum vertical stroke of the saw 420 mm M...
Hamburg, Germany
2010 MBD Lace 229/2-
- Manufacturer: Janssen Steintechnik
Calibration machine for slabs 2 calibration units Diamond tools per head: 24 Diamond tool width: 12 mm Rated power: 101 kW Voltage: 400 V – 50 Hz Usable working width: 300 mm – 2,100 mm Usable working thickness: ...
Hamburg, Germany
2004 BM Diamond 80L C800
- Manufacturer: B.M. Officine
- Model: Diamond
80 blades gang saw for marble Stroke 800 mm Cutting capacity 3200 x 2000 x 2000 mm Blade length 4,400 mm Engine power 110 kW Number 1 block trolley Number 2 block baskets Machine in good working condition (80 bla...
Hamburg, Germany
2011 Bacci Dino LPL 80/106-
- Manufacturer: Bacci
Calibration and polishing machine Maximum working width: 800 mm Maximum working thickness: 70 mm Calibration spindles: 1 Polishing spindles: 6 Calibration spindle power: 22 kW Polishing spindle power: 5.5 kW Work...
Hamburg, Germany
2002 PELLEGRINI DF JOLLY 2500-
- Manufacturer: Pellegrini
- Model: DF2500
Wire saw - Refurbished with 6 months warranty. Installation and training can be carried out at extra cost. No. 2 + 1 axis (270° rotation axis, small wheels) Motorized and rotating carriage for multiple cuts (the ...
Hamburg, Germany
2002 SIMEC NT2/2M-
- Manufacturer: Simec
Block Cutter Maximum input block size: 2,300 x 3,400 x 2,100 mm Maximum number of vertical saws: 2 Maximum vertical saw blade diameter: 1,700 mm Minimum vertical saw blade diameter: 1,000 mm Maximum horizontal sa...
Hamburg, Germany