Used Processing in Hamburg, Germany

2020 MEC IMP AUT PX+P4+PX
- Manufacturer: MEC
Complete, fully automatic stone splitting system MEC IMP AUT consisting of 3 stone splitting machines and a waste conveyor PX + P4 + PX PX 1900 x 500 P4 950 x 400 Max. 1800 x 550 mm More used machines at: www.jan...
Hamburg, Germany
2020 Matec 10-
- Manufacturer: Matec
Complete water treatment system with 10 filter plates Was not used after installation, in mint condition Filter plate size 800 x 800 mm Siemens control system Thickener Various pumps Dimensions +/- 3000 x 1650 mm...
Hamburg, Germany
2003 BAVELLONI Egar 315-4 Ts-
- Manufacturer: Bavelloni
- Model: Egar
CNC machining center Interpolated axis 4 KW 9.6 X-axis mm. 2,730 Y-axis mm. 1,620 Software Cad Cam Easycad Steep taper ISO 40 Tool magazine positions 19 Voltage V.400 Hz 50 More used machines at: www.janssen-used...
Hamburg, Germany
2004 Spielvogel Colibri S7
- Manufacturer: Spielvogel
Bridge saw/circular stone saw The machine has a turntable and can be loaded from the front and right side. A Heglmeier program for automatic cutting is installed. The usual automatic programs, lowering, bevel cut...
Hamburg, Germany
2021 Burkhardt Löffler CSA 567
- Manufacturer: Löffler
Semi-gantry bridge saw with 1200 mm saw blade Long travel 16.5 m x 4 m 4 workstations (1 long table) including 4 digital cameras, optional support tables Machine is sold only with accessories (spare parts, millin...
Hamburg, Germany
2007 Marmo Meccanica LTV 621 DX-
- Manufacturer: Marmo Meccanica
Edge polishing machine for flat and round edges Polishing heads 6 Bevels: 2 Working thickness: 10 ÷ 60 mm Overall dimensions (without roller conveyors): 4.5 x 2.3 x 1.7 m Total weight: 2,900 kg Working direction:...
Hamburg, Germany
1991 Pedrini M 580 GR-
- Manufacturer: Pedrini
Block cutter - SCALETTA Motor, rated power – 190 kW. 32 vertical discs (cutting thickness 12 mm) Min. disc, d: 1000 mm Max. disc, d: 1600 mm Shaft D: 110 mm; shaft length: 600 mm Diameter of the horizontal disc –...
Hamburg, Germany
2010 BIDESE Gold 14 V-
- Manufacturer: Bidese
Bidese Multiwire Number of ropes: 14 Rope length: 21,040 mm, rope diameter 7.3 mm Engine power: 75 KW Cutting dimensions: 3,600x2,100 mm Accessories: Block trolley Condition of the machine: Good Weight: 23.5 t Po...
Hamburg, Germany
2017 INTERMAC Master 45-
- Manufacturer: Intermac
- Model: Master 45
5-Axis CNC Machining Center Operating Hours: 3,568 Maximum Dimensions: 4,060 x 2,300 mm PC-controlled 5-axis machining center for milling, drilling, grinding, polishing, beveling, and engraving marble, stone, and...
Hamburg, Germany
2002 Comandulli EDILUX 8+4 DX-
- Manufacturer: Comandulli
- Model: Edilux
Edge polishing machine for marble and granite straight edge working direction from right to left 8 heads, 4 bevels plate thickness min. 20 mm, max. 100 mm total power – kW 26.7 total weight of the machine: 4,200 ...
Hamburg, Germany
2005 Dr. Kronenberger -
- Manufacturer: Dr. Kronenberger
Complete water treatment including all pumps Pre-clarification tank Septic tank 1 new sludge container of approx. 5m³, the fine metal grid in the container works like a coffee filter, the water runs out the botto...
Hamburg, Germany
2015 Intermac Master 850
- Manufacturer: Intermac
CNC machining center/CNC bridge saw 60-tool magazine Saw blade included Bsolid CAD/CAM software Machine equipped with deposition tools, drain, and drums for straight edges Vacuum cleaner included More used machin...
Hamburg, Germany
1998 SIMEC LM2000/212
- Manufacturer: Simec
- Model: LM 2000
Marble polishing line Slabs with 10 polishing heads per slab + 2 calibration units (80 cm) Slab loading carriage Intermediate roller conveyors Tilt-type slab unloading roller conveyor More used machines at: www.j...
Hamburg, Germany
2003 Bavelloni Egar 250-4
- Manufacturer: Bavelloni
- Model: Egar 250
CNC Machining Center The machine has only 2,300 operating hours! X-axis 2,730 mm Y-axis 1,620 mm Z-axis 300 mm Tool positions: 19 Table size: 2,500 x 1,200 mm The machine comes complete with all the tools shown i...
Hamburg, Germany
2005 Omag Mill 4X-
- Manufacturer: Omag
- Model: Mill 4X
CNC machining center with 4 axes 25-position tool magazine Collet replaced with original Saccardo parts. Touchscreen and computer are brand new Approximately 20 steep taper chucks are also included with the machi...
Hamburg, Germany