Used Mineral Processing

2-cell flotation bank No. 24 with a capacity of 50 cu ft, GALIGHER brand

• Manufacturer: Galigher

Two-cell float bank, No. 24, 50 cu ft capacity, GALIGHER brand No. 24 Used, in workshop Motor specifications: Manufacturer: ALLS-CHANLMERS Serial number: 1-5124-86631-1-21 General dimensions:

2-cell flotation bank No. 24 with a capacity of 50 cu ft, GALIGHER brand

• Manufacturer: Galigher

Two-cell float bank, No. 24, 50 cu ft capacity, GALIGHER brand No. 24 Used, in workshop Motor specifications: Manufacturer: ALLS-CHANLMERS Serial number: 1-5124-86631-1-7 General dimensions:

2-cell flotation bank No. 24 with a capacity of 50 cu ft, GALIGHER brand

• Manufacturer: Galigher

Two-cell float bank, No. 24, 50 cu ft capacity, GALIGHER brand No. 24 Used, in workshop Motor specifications: Manufacturer: STERLING A.C. MOTOR Serial number: M4512-4 General dimensions:

Replacement rubber shield for 7x10 mill

Replacement rubber shield for 7x10 mill REF-205 Shims, 1.14 m long, curved type (12 pcs) Shims, 1.24 m long, curved type (1 pcs) Shims, 1.88 m long x 9 cm wide x 6 cm long (1 pcs) REF-206 Shims, 1.32 m long, Skec...

32" x 17" x 3" Manganese Steel Mill Wall Armor

• Manufacturer: NO-DISPONIBLE

32" x 17" x 3" Manganese Steel Mill Wall Armor With 1 Hole Only For Mill Wall Never Used

Lainer or shield for mill Part No. L22H

• Manufacturer: NO-DISPONIBLE

New mill shielding, part no. L22H 1 piece 19″ x 23″ with two holes spaced 10″ apart, weighing 113 kg 1 piece 24″ x 24″ with two holes spaced 12″ apart, weighing 131 kg 1 piece 14″ x 24″ with two holes spaced 11″ ...

Side guards for flotation cells 1.82 M X 1.43 M

• Manufacturer: NO-DISPONIBLE

Side guards for flotation cells 1.82 M X 1.43 M Thickness 1/8'' Never used

Side guards for flotation cells 1.69 M X 1.27 M

• Manufacturer: NO-DISPONIBLE

Side guards for flotation cells 1.69 M X 1.27 M Thickness 1/8'' Never used

Cummins 4089301RX PUMP WATER

• Manufacturer: Cummins

Cummins 4089301RX Water Pump Water pump Manufacturer: Komatsu Never used PCP

87″ wide x 38″ diameter magnetic roller

87″ wide x 38″ diameter magnetic roller PCP Measures of: 87" wide x 38" diameter | Product type: silver | Branch: [{"id"=>1, "name"=>"Hermosillo, Sonora, Mexico", "slug"=>"hermosillo-sonora-mexico"}] | Main indus...

Spinktek ST-11-3 Disc Filter, Stainless Steel #4444671

• Manufacturer: Spinktek Systems

Spintek Systems Model number ST-11-3 stainless steel disc filter. Equipment is driven by under-mounted drive, direct connected to spinning discs. Rated for 3-phase, 60-cycle, 460 volt, 70 PSI. Unitized on portabl...

Mill, Sag, 40' X 25', FL Smidth, 34,866 HP, Unused #D739644

• Manufacturer: FL Smidth

Unused FL Smidth SAG mill, 40' diameter x 25' length, designed for 34,866 HP (26,000 kW) wrap-around GMD motor (motor not included). No liners included.

WEMCO brand 3-cell flotation bank No. 16

• Manufacturer: Wemco

WEMCO 3-Cell No. 16 Floatation Bench No. 16 Used, no service

2-cell flotation bank No. 24 with a capacity of 50 cu ft, GALIGHER brand

• Manufacturer: Galigher

Two-cell float bank, No. 24, 50 cu ft capacity, GALIGHER brand No. 24 Used - Not in service Motor specifications: Manufacturer: STERLING A.C. MOTOR Serial number: W4512-7 General dimensions: