Used Material Handling in Saxony, Germany

Hötten Maschinenbau R47 DT90L4/BMG/MM15

• Manufacturer: Hötten Maschinenbau

Belt width: 1.60 m and 0.42 m Belt length: approx. 2.00 m Load capacity up to 350 kg tilting table, conveyor belt, transport table solid design, used Load capacity up to 350 kg cycle time 40 s Return rollers Ø 11...

Neuhäuser 2.126-2

• Manufacturer: Neuhäuser

Neuhäuser Conveyor width 210 mm Permanent magnetic slide chip conveyor Neuhäuser 2,126-2 2400 x 210 mm used Permanent magnetic slide chip conveyor chip conveyor for transporting punching scrap, chips and finished...

WITTMANN NFMXB315 PTVMS3

• Manufacturer: Wittmann

WITTMANN NFMXB315 PTVMS3 Vacuum Conveyor (Used) This used vacuum conveyor is from the manufacturer WITTMANN , type NFMXB315 PTVMS3 Technical Specifications Manufacturer: Type: Serial Number (HAN): W30004469 Vo...

Stainless steel tube magnet #B16958

Inlet and outlet approx. Ø 150 mm Permanent pipe magnetic separator pipe magnet flow magnet magnetic pipe metal separator used The magnetic separator is used for cleaning e.g. grain, barley, maize and in the recy...

WAESCHLE ZPD 400.3/21AC

• Manufacturer: Coperion Waeschle

Rotary feeder Rotary feeder Product feeder Dust feeder Dosing feeder Used Inlet opening approx. Ø 300 mm Installation height approx. 600 mm Leaf depth approx. 60 mm Approx. 10 chambers Drive with gear motor for i...

TOREX / WAM RV 10

• Manufacturer: TOREX / WAM

Rotary feeder Rotary feeder Product feeder Dust feeder Dosing feeder Used Inlet opening approx. 370 x 370 mm Installation height approx. 360 mm Leaf depth approx. 80 mm Approx. 7 chambers Overall dimensions appro...

Downdraught wind sifter Ø 500 mm #B16953

Downdraft wind sifter, wind cleaner used STRECKEL & SCHRADER KG Type FWS 500 Dimensions approx. Ø 580 mm x approx. H 1270 mm Inlet and outlet approx. Ø 120 mm Aspriration connection 150 mm Weight approx. 70 kg Fo...

Stainless steel trough auger approx. 1000 mm #B17260

Nd Conveying length: about 1000 mm | Diameter: approx. 200 mm | Slope: approx 170 mm | Article weight: 150,00 kg

Knife gate valve 650 x 310 mm pneumatic e B16704 #B16704a

• Manufacturer: MÜLLNER & LUX

Flat gate valve, gate valve, pneumatic knife gate valve for piece goods used Round square Reduction height approx. 600 mm to Ø approx. 300 mm Total dimensions approx. 400 x 750 x 700 mm + cylinder 440 mm 4 pieces...

Adolf Baumgarten 3/2 B

• Manufacturer: Adolf Baumgarten

Coffee centrifuge with discharge screw used Coffee centrifuge, sieve machine, drum sieve, sieve drum with discharge screw used Trough length approx. 1150 mm Mesh size approx. Ø 2 mm Gear motor sieve, inclined rot...

Screening machine 5 x 0.9 m #B17434

• Manufacturer: BOSKER en ZONEN B.V.

Screening machine, vibrating screen used Basin and sieves made of stainless steel Vibrating screen approx. 4000 x 800 mm 3 basins (approx. 1200 x 900 / 1700 x 900 / 1800 x 900 mm) Depth of the basins approx. 1000...

Double-shaft trough auger 3.10 m stainless steel #K17395

Trough length 3100 mm Trough width 320 mm SEW G-motor Stainless steel screw conveyor Helix pitch 130 mm Helix height 55 mm Helix thickness 3 mm Shaft Ø 60 mm Outlet 320x300 mm on motor side Overall dimensions L44...

Blow-through lock Ø 300 mm #B16780

Blow-through rotary valve, rotary valve Rotary valve Product valve Dust valve Dosing valve Used Inlet opening approx. mm Installation height approx. mm Approx. chambers Drive with gear motor Overall dimensions ap...

Trough auger 3.5 m #B16753

• Manufacturer: MÜLLNER & LUX

Trough screw conveyor, screw conveyor used Inlet approx. 920 x 44 mm Outlet approx. 360 x 340 and 240 x 300 mm Drive with one gear motor approx. 1.5 kW 83 rpm 220/380 V Dimensions approx. 4000 x 600 x 700 mm The ...

Trough auger 2.8 m #B16768

Trough screw conveyor, screw conveyor used blade thickness approx. 2 mm opening approx. 250 x 250 mm Drive with a variable gear motor approx. 1 kW 22-110 rpm 220/380 V Dimensions approx. 3000 x 300 x 550 mm The a...