Used Material Handling in Michigan, USA

AEC WHITLOCK AL-031G Vacuum Loader Used

• Manufacturer: AEC

Outlet: 3 3/4 Flanges: 12 1/2 Bolts center to center: 5 1/2 Inlet: 1 1/2 Motor: Model: 114786 F6 (I.S. 14786) Buyers are welcome to inspect equipment prior to purchase. Expedited shipping services are avai...

WHITLOCK NOMAD PD4 Loader Used

• Manufacturer: Whitlock

Input: 1 3/8 Output: 3 Flanges: 7 x 7 Bolt holes center to center: 5 1/2 Cylinder height: 8 1/2 Cylinder diameter: 9 Cone height: 3 1/2 Buyers are welcome to inspect equipment prior to purchase. Expedited...

AEC WHITLOCK DH-6.0M Quick Drying Hopper Used

• Manufacturer: AEC

AEC WHITLOCK DH-6.0M Quick Drying Hopper Approx. 225 Lb Capacity DH-6 Inlet: 4 3/8" 34" Cylinder Height 16" Cone Height 20" Inside Diameter 6" Extended Height on Cylinder 12" Top Opening 7" x 7" Flange ...

VAN DORN DEMAG Drawer Magnet Used

• Manufacturer: Van Dorn Demag

BOTTOM FLANGE 6 1/2 X 6 1/2 TOP FLANGE 6 1/2 X 6 1/2 3 X 3 TOP CENTER HOLE HOLE TO HOLE BOTTOM FLANGE 3 1/4 OLD STOCK NUMBER 137058 HOLE TO HOLE BOTTOM FLANGE 5 X 5 BOTTOM CENTER HOLE 3 X3 Removed from: 3...

40' high cube 8’ wide x 9’6” tall swing doors on one end wood deck rings for tie downs inside

40' high cube 8’ wide x 9’6” tall, swing doors on one end, wood deck, rings for tie downs inside, scattered dings/dents, decking showing wear in a couple spots, weighs approx. 8,470 lbs, used

40' high cube 8’ wide x 8’6” tall swing doors on one end wood deck rings for tie downs inside

40' high cube 8’ wide x 8’6” tall, swing doors on one end, wood deck, rings for tie downs inside, scattered dings/dents, decking showing wear in a couple spots, weighs approx. 8,160 lbs, used

conveyor, 110v 48" long x 18" wide

• Manufacturer: new london engineering

mild steel conveyor dimensions: 48" long 18" wide 38" tall with 4" casters Power: 110V belting: PVC All parts ordered before 3:30 pm (EST) typically ship same day via UPS, FedEx, or USPS! If the order is plac...

1989 Novatec NPH-HOPPER Used

• Manufacturer: Novatec
• Model: NPH-

600 lb Capacity Buyers are welcome to inspect equipment prior to purchase. Expedited shipping services are available upon request. This piece is located at Ideal Machinery, Inc. on our showroom floor. Located...

CONAIR FRANKLIN DB12SE03MB DustBeater Vacuum Loader USED

• Manufacturer: Conair

4" Cylinder Height 7.25" Cone Height 12" Inside Cylinder 13.75" Filter Diameter 14.5" Inside Lid Cylinder 4.75" Bottom Inlet / Outlet Approx. 40.79 mm Tested Good Buyers are welcome to inspect equipment p...

UNA-DYN LS-45 Auto Loader USED

• Manufacturer: Una-Dyn

Self Contained with Lid and Filter Outside Diameter: 10" Inside Diameter: 9" Outlet 1 Inside Diameter: 1.25" Bottom Outlet Inside Diameter: 3" Flange: 7" x 5.5" Holes Center-to-Center: 6.5" x 5" 110 Volt ...

UNA-DYN 82894.06 Loader Used

• Manufacturer: Una-Dyn

82894.06 LID AND FILTER INCLUDED OD: 10" ID: 8 3/4" Outlet 1: 1 1/2" Bottom outlet: 2 1/2" Flange: 7" x 5 1/2" Bolt Holes, Center-to-Center: 6 1/4" x 4 3/4" Buyers are welcome to inspect equipment prior t...

CONAIR DB8 DustBeater Vacuum Loader USED

• Manufacturer: Conair
• Model: DB8

Self-Contained 200 lbs/hr Recommended Throughput 8" Loader Diameter 0.14 Cu Ft Loader Volume 80 PSI Compressed Air Requirement 50' Max Conveying Distance 1,5", 1.75", 2" Material/Vacuum Line Size Available ...

NOVATEC VL Vacuum Loader USED

• Manufacturer: Novatec

Buyers are welcome to inspect equipment prior to purchase. Expedited shipping services are available upon request. This piece is located at Ideal Machinery, Inc. on our showroom floor. Located at: 10230 N. Hol...

EAGLE Boxing Shipping Conveyor T100 USED

• Manufacturer: Eagle
• Model: T100

110 Volt Single Phase 60 Hz 5 Amp Tested Good Buyers are welcome to inspect equipment prior to purchase. Expedited shipping services are available. This piece is located at Ideal Machinery, Inc. on our sho...

Generic Drawer Magnet Used

• Manufacturer: Generic

Buyers are welcome to inspect equipment prior to purchase. Expedited shipping services are available upon request. This piece is located at Ideal Machinery, Inc. on our showroom floor. Located at: 10230 N. Hol...