Used Machine Tools in Saxony, Germany

TCT micro drill

• Manufacturer: SUB-MICRON TECH CO. LTD.

Micro drills, head drills, drill bits, 10 pieces TCT, SUB-MICRON TECH CO. LTD. MD series 0.105*1.5 Other quantities on request ! New !

WMW twist drill

• Manufacturer: WMW

Twist drills WMW, WERKÖ Ø 85,0 HSS used, tested ! Diameter: Ø 85.0 mm | Cutting angle: 118° | Cutting fabric: HSS | Morse taper: MK6 | Overall length: 480 mm | A-measure: 230 mm | Span length: 255 mm | Dimensions...

WMW twist drill

• Manufacturer: WMW

Twist drills WMW, WERKÖ Ø 57.0 HSS New ! Diameter: Ø 57.0 mm | Cutting angle: 118° | Cutting fabric: HSS | Morse taper: MK5 | Overall length: 423 mm | A-measure: 266 mm | Span length: 230 mm | Dimensions ( packag...

WMW twist drill

• Manufacturer: WMW

Twist drills WMW, WERKÖ Ø 36,0 HSS New ! preserved !

WMW service unit

• Manufacturer: WMW

Service unit, machine control WMW SERVICE UNIT III AUERBACH Fkr SRS 250/1 ( AUERBACHFkrSRS250/1 ) approx. 6 m connection cable picture similar ! used, tested !

PAGUS mechanical clutch

• Manufacturer: Pagus

Mechanical clutch PAGUS Hollow shaft 1: Diameter: Ø 24 mm 1 groove Hollow shaft 2: Diameter: Ø 21 / 25 mm 4 grooves spare part for milling machine FRITZ WERNER FV1 ! used, tested !

PAGUS all-metal damper

• Manufacturer: Pagus

All-metal damper, machine foot set, leveling foot set, vibration isolator, 4 pieces PAGUS Ø 25 x 20 mm Threaded hole: M6 x 1.0 Depth: 10 mm 2x hole: Diameter: Ø 7 / 12 mm ( for hexagon socket screws ) Material: S...

FIXATOR level raising range

• Manufacturer: Pagus

Level raising range for machine feet e FIXATOR 7 pieces Ø 100 mm x 1 mm, with slot 24 mm 8 pieces Ø 100 mm x 2 mm, with slot 24 mm 1 piece Ø 100 mm x 4 mm, with slot 24 mm 1 piece Ø 100 mm x 5 mm, with slot 24 mm...

1989 SCHNUPP HYDRAULIK 11-38-D-31496

• Manufacturer: SCHNUPP HYDRAULIK

TRANSFER TABLE - TRANSFER TROLLEY - TOOL CHANGING SYSTEM Possible application: for press tools/devices as interchangeable trolleys in press lines

Vertical pusher Marav VFS300

Vertical shaping machine Marav (Maschinenfabrik Ravensburg AG) VFS300 used, tested !

ATLAS COPCO angle drilling machine

• Manufacturer: Atlas-Copco

Angle drilling machine ATLAS COPCO LBV16 045-91 8421 0110 38 used, checked ! with operating instructions !

ATLAS COPCO angle drilling machine

• Manufacturer: Atlas-Copco

Angle drilling machine ATLAS COPCO LBV16 045-91 8421 0110 38 used, tested ! with operating instructions !

Incluido

• Manufacturer: Pagus

Machine vice PAGUS on rotary table with graduation 360° rotatable

PAGUS compact tensioner

• Manufacturer: Pagus

NC compact vice, machine vice PAGUS with prism jaw

CSN centering vice

• Manufacturer: Pagus

Centering vice, self-centering machine vice CSN 243137 TYPE 125 with prismatic jaws, rotatable used, tested !