Used Machine Tools in Saxony, Germany

ROTER BERG drive unit

• Manufacturer: RED BERG

Drive unit with collet chuck ROTER BERG 940 400 22 315 / 630 rpm Collet chuck: 163E DIN 6343 Motor: KEB ZG0 KPR 71 G 4-2 ( ZG0KPR71G4-2 ) 0.55 / 0.7 kW 315 / 630 rpm 400 V 3AC Hole spacing: 260 / 200 mm, hole dia...

ORSTA pressure generator

• Manufacturer: Orsta

Hydraulic pressure generator, Hydraulic cylinder tester, mobile ORSTA TGL 30-7306 63 - 160 kp/cm² 380 V 3 AC 50 Hz used, tested !

ERNAULT-TOYODA coolant reservoir

• Manufacturer: Ernault Toyoda

Coolant tank with pump ERNAULT-TOYODA 250 liters (e.g. for Ernault-Toyoda HES52) pump 120 l/min 3,5 bar 1.1 kW 220 / 380 V used, tested !

WMW clamping drive

• Manufacturer: WMW

Clamping drive, clamping force generator, electric WMW EDU I80 M1 Motor: KMR 71 G 4 F 0.75 kW 1380 rpm 220 / 380 V 3AC New, with documents !

PAGUS Bezel

• Manufacturer: Pagus

Bezel, lunette, setting stick, fixed PAGUS used, tested !

AS TECH bolt tensioning device

• Manufacturer: AS TECH

Bolt tensioning device AS TECH HWS Hand lever pump: HDP07001003 9158.22 Hydraulic nut: HWS16111131 9158.22.04 158 kN 700 bar approx. 2.0 m connection hose in metal case used, tested !

RÖHM Bezel

• Manufacturer: Röhm

Bezel, bezel, self-centering bezel RÖHM SLZP-52180 4-645-003-04

Bezel 350mm

Steady rest distance shoulder surface of the guideways: 530 mm used, tested !

PAGUS Luenette

• Manufacturer: Pagus

Bezel, bezel, self-centering bezel PAGUS RMB 5 644 599 used !

SILISTRA chip conveyor

• Manufacturer: Silistra

Chip conveyors, hinged apron conveyors Chip conveyors, hinged belt conveyors SILISTRA TCA 280 x 3221 220 / 380 V 3AC Coolant pump: APOLLO 4 KSEY-25-002 02-008-85-017 Q = 1.6 m³/h H = 63.5 m Motor: MEZ 4AP90L-4 1....

FEIN tin snips

• Manufacturer: Fein

Sheet metal shears, high-frequency sheet metal shears, high-frequency tool, high-frequency machines FEIN QSz 848 0.5 kW 1240 strokes/min 265 V 3AC 200 Hz approx. 3.5 m connection cable used, tested!

ATLAS COPCO angle drilling machine

• Manufacturer: Atlas-Copco

Angle drilling machine ATLAS COPCO LBV16 045-91 8421 0110 38 New ! with instruction manual !

ROTO RECORD 4-jaw chuck

4-jaw chuck, four-jaw chuck ROTO RECORD, WMW DH 200 x 4 ( DH200x4 ) centering Ø: 106 / 102 mm, depth: 20 mm ( conical ) used, tested !

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH 200 x 3 - III ( DH200x3-III ) TGL 30-2333 3x threaded hole: M10 x 1.5, depth: 30 mm used, tested !

ROTO RECORD 4-jaw chuck

• Manufacturer: ROTO RECORD

4-jaw chuck, four-jaw chuck ROTO RECORD, WMW DH 315 x 4-II ( DH315x4-II ) used, tested !