Used Lathes in Hesse, Germany

Faceplate KLOPFER

• Manufacturer: Kloepfer

Additional information Unused and therefore in mint condition, American-style faceplate with direct mount Accessories: hard reversible jaws Further information Outer diameter 500 mm Bore 95 mm Flange width 10...

Dreibackenfutter

Additional information Three-jaw chuck, make unknown Accessories 1 set each of internal and external jaws Further information Camlock short taper chuck size D1-4"

RÖHM 493 UGE

• Manufacturer: Röhm

Additional information Visibly unused and therefore almost new faceplate Accessories Clamping wrench Further information

Vierbackenfutter

Additional information Very well-maintained four-jaw chuck Accessories Only stepped jaws (without counter jaws), chuck key Further information

2005 MAZAK QT NEXUS 200 MS

• Manufacturer: Mazak
• Model: QUICK TURN 200MS

Control: Mazatrol 640 T Nexus | Max. turning diameter: 380 mm | Max. turning length: 575 mm | Traverse: X/Z/W: 230/575/585 mm | Main spindle: Drive power: 26/22 kW max. spindle speed: 5,000 rpm max. bar capacity...

2021 MAZAK INTEGREX e-500 H

• Manufacturer: Mazak
• Model: INTEGREX E-500H

Machine model: Mazak Integrex e 500 H x 3000 | Control: Smooth X | Max. turning diameter: 820 mm | Max. turning length: 3.000 mm | Traverse: X-axis: 820 mm Y-axis: 500 mm Z-axis: 3,122 mm Tailstock: 2,990 mm B-a...

2007 MAZAK INTEGREX 200-IVST

• Manufacturer: Mazak
• Model: INTEGREX 200 IV ST

Control: Mazatrol matrix | Max. turning diameter: 660 mm | Max. turning length: 1.495 mm | Traverse: X-axis: 580 mm Y-axis: 150 mm Z-axis: 1,545 mm W-axis: 1,490 mm B-axis -30 to 210° | Rapid traverse: X/Y/Z/W 5...

2001 MAZAK INTEGREX 200 SY + GL100C

• Manufacturer: Mazak
• Model: INTEGREX 200SY

Control: Mazatrol 640 MT | Max. turning diameter: 540 mm | Max. turning length: 1.065 mm | Main spindle: Max. spindle speed 5,000 rpm | Against spindle: Max. spindle speed 6,000 rpm | Milling spindle: max. spind...

2018 MAZAK HQR-250 MSY (850U)

• Manufacturer: Mazak
• Model: HQR-250MSY/850U

Control: Smooth G | Traverse: X1/X2 axis: 207/141 mm Y1/Y2 axis: 100/70 mm Z1/Z2 axis: 760/815 mm W-axis: 865 mm | Max. turning diameter (upper turret): 344 mm | Max. turning diameter (lower turret): 210 mm | Ma...

2005 MAZAK INTEGREX 200 III ST

• Manufacturer: Mazak
• Model: INTEGREX 200 III ST

Control: Mazatrol 640 MT Pro | Max. turning diameter: 660 mm | Max. turning length: 1.045 mm | Traverse: X1 axis: 580 mm X2 axis: 150 mm Y axis: 160 mm Z1 axis: 1,045 mm Z2 axis: 1,010 mm W axis: 1,050 mm B axis...

2017 MAZAK HQR-200 MSY (1300U)

• Manufacturer: Mazak
• Model: HQR-200MSY/1300U

Commissioning: 2018 | Control: Smooth G | Traverse: X1/X2 axis: 207/141 mm Y1/Y2 axis: 100/70 mm Z1/Z2 axis: 1,225/1,280 mm | Max. turning diameter (upper turret): 344 mm | Max. turning diameter (lower turret): ...

1999 WEINGÄRTNER 1200-11000 1113-2100053

• Manufacturer: Weingartner

HS Code: 8461 90 00 Weingärtner VARIO - Peeling machine Description of the machine Type Vario 1200-11000 Intended use: Peeling machine for pipes and solid material with ultrasonic measuring system for detecting w...

COLLET + ENGELHARD Typ BN 100

• Manufacturer: COLLET + ENGELHARD

No. 4896: 1 used Vertical milling head make SPANZANGE + ENGELHARD, type BN 100 (BFfb 85 / 110),

1997 SCHÜTTE SF 20 S DNT 1113-235089

• Manufacturer: Schutte

Control type: CNC | Freight basis: EXW | Spindle number: 6 | Spindle diffuser: 18 mm | Turning length: 63/50 mm | Machine weight approx.: 8,6 t | Spindle drive motor: 11 kW

2008 SCHÜTTE SG 18 1113-235080

• Manufacturer: Schutte
• Model: SG 18

Control type: other | Freight basis: EXW | Spindle number: 6 | Spindle diffuser: 18 mm | Turning length: 63/50 mm | Machine weight approx.: 4,5 t | Spindle drive motor: 11 kW