Used Drilling Rigs

FRANKS 2042 DRILLING RIG #3977Tb

• Manufacturer: Franks

Rated to 8000’ with 4-1/2” DP, (2) Cat 3406 engines 425hp ea #1800 rpm, 112’ x 300,000# derrick, 17’ adjustable substructure, 17-1/2” x 44” rotary, water tank/doghouse combo, Vdoor, catwalk Price: $325,000 SPEEDS...

1997 INGERSOLL-RAND DMLSP

• Manufacturer: Ingersoll Rand

DTH Class Single Pass Drill Rig – 55’ft – 60’ft Mast Cummins QSK19 Diesel Engine High Pressure – IR HR2.5 – 1050 CFM @ 350 PSI Onboard Air Compressor CAT 330L&S Undercarriage

ARDCO 4 X BUGGY DRILL RIG AND TRANSEQUIP WATER #4038Ta

Rig has Cummins 5.9 diesel engine Price: $115,000 for both

BUCYRUS ERIE 22W CABLE TOOL DRILL RIG #5067T

• Manufacturer: Bucyrus-Erie
• Model: 22W
• Mast Height: 12.192 meter

Mounted on 2008 gooseneck trailer, 2011 66HP Tier 4i engine with approx. 1310 hours, California Carb Compliant, 40’ mast height, 2 breakout wrenches, no other tooling, currently working Price: $57,000 - Californi...

1992 CME 75HT AUGER DRILL RIG #10533Tb

Manufactured 1992, mounted on 2018 Peterbuilt 337 truck with automatic transmission, 3 winch lines, wiggle tail, 25’ mast, Moyno 3L8 pump, breakout wrench, Cummins 6B (rebuilt 2021) Price: $225,000 CME 75HT

2014 CME 550X BUGGY DRILL RIG #863T

Manufactured 2014, approx 4720 hours, Cummins diesel engine, manual transmission, (3) winches (3200 lb, 7000 lb, 3200 lb), Moyno 3L8 pump, 140 lb auto drop hammer, rod clamp, breakout wrench, auger racks, rod sto...

2022 DIEDRICH D50 AUGER DRILL RIG #3388T

• Manufacturer: Diedrich

Manufactured 2022 (delivered 2023), John Deere 4-cyl engine, (3) winches plus wireline wince, 3L6 Moyno pump, SPT hammer, breakout, 120 gal water tank, mounted on rubber track carrier, remote control, fold down w...

REEDRILL TAURUS XL DRILL RIG #10089T

• Manufacturer: Taurus
• Model: XL
• Gearbox type: Automatic
• Drilling depth: 24.384 meter

Built in 1990’s, track mounted, 80’ depth, 120” max bit diameter, 10” inner kelly bar, 12” outer kelly bar, Cummins engine, automatic transmission, 25,000 lb service winch, 280 degree extendable table, 144,000 ft...

2005 INGERSOLL_RAND ECM 370

HIGH-PRESSURE DTH DRILL RIG Cat Diesel Powered Onboard High-Pressure Sullair Air Compressor Runs 20’ft drill pipe

1994 GARDNER DENVER 15W DRILL RIG #4411T

• Manufacturer: Gardner Denver

Manufactured 1994, 10” table, 2 x 4 x 13 centrifugal mud pump, long kelly, air drawworks, mounted on 1994 Western Star truck, drilling daily, drawworks and table recently rebuilt, hydraulic pump cylinders rebuilt...

PORTADRILL RV6 DRILL RIG #3524T

• Manufacturer: Portadrill

Triple drum drawworks, 35” table opening, 6” x 18’ kelly, 35’ derrick, John Deere diesel engine, Sullair 375/125 air compressor (engine needs work), 6” centrifugal pump (removed, but available), mounted on Intern...

1994 INGERSOLL RAND A300 AUGER DRILL RIG #7309Ta

• Manufacturer: Ingersoll Rand

Manufactured 1994, 8873 hours, mounted on 2006 International 4300 truck with approx 89,200 miles, 2 winches, 3L6 Moyno pump, slide base with cross slide head, probe hammer, cathead, 10’ drill stroke, fixed monopo...

1994 INGERSOLL RAND A300 AUGER DRILL RIG #7309Tb

• Manufacturer: Ingersoll Rand

Manufactured 1994, approx 9000 hours, mounted on 2007 International 4300 truck with approx 98,500 miles, 2 winches, 3L6 Moyno pump, slide base with cross slide head, probe hammer, cathead, toolboxes, under deck a...

SIMCO 2400 TRACK MOUNTED AUGER DRILL RIG #5453Tc

• Manufacturer: Simco

Diesel engine, cathead, track mounted, no auto hammer Price: $57,500

1995 CME 45C AUGER DRILL RIG #5358T

Manufactured 1995, fully refurbished, new 3 cylinder diesel engine (3 hours), new transmission, new cylinders, new pump, 1 winch, auto hammer, cathead, wiggle tail, all new LED lighting, mounted on 1995 Ford F800...

Ingersoll Rand CM-682 Drilling Rig

• Manufacturer: Ingersoll Rand
• Model: CM-682

Good condition Ingersoll Rand CM-682 Drilling Rigs manufactured in 2001. Located in USA and other countries. Click request price for more information.