Used machine tools in Ohio, USA

VICTAULIC MODEL # VE106 ROLL GROVING TOOL / TRIPOD STAND: STOCK #78565
- used
- Manufacturer: VICTAULIC
MODEL # VE106 Stock#: 78565 | Capacity pipe sch 5 to 40: 1-1/4" X 6" | Capacity stainless sch 405: 3.6" TO 6" | Stand: YES | Phase: 1 | Votage: 110
Holland, OH
Trusted Seller
DAVENPORT #10-901 SECONDARY OPERATION DRILLING AND TAPPING MACHINE
- used
- Manufacturer: Davenport
THREE UNITS MOUNTED VERTICALLY TWO UNITS MOUNTED HORIZONTALLY ON EITHER SIDE OF INDEX TABLE. PNEUMATICALLY POWERED, HYDRAULICALLY CONTROLLED MECHANISM. EACH UNIT HAS A 3" STROKE. BRASS - ALUMINUM ..................
Mansfield, OH
COLLIS 75382, 68212, 67691 TAPER TAP TOOL HOLDERS [3 TOTAL] STOCK #15560
- used
- Manufacturer: COLLIS
419-269-2000 10559 Geiser Road Holland, OH 43528 Machine Information COLLIS 75382, 68212, 67691 TAPER TAP TOOL HOLDERS [3 TOTAL] STOCK #15560 Stock #: 15560 YODER BROTHER MACHINERY SALES 10559 Geiser Road HOLLAND...
Holland, OH
Trusted Seller
SASPI Mdl# RV-8 THREAD ROLLING MACHINE
- used
- Manufacturer: SASPI
MAX. WIRE DIA. 5/16" EQUIPPED WITH: 30" VIBRA BOWL MOUNTED CONTROLS 8' CONVEYOR 15 HP 230 VOLT 1175 RPM 60 HZ 38.4 AMPS MOTOR O.A. DIM. 64" X 118" X 85" W...
Mansfield, OH
8" LANDIS PIPE THREADING MACHINE: STOCK #79749
- used
- Manufacturer: Landis
DIAMETER OF SPINDLE HOLE .. 8" Stock#: 79749 | Max capacity: 8" | Min capacity: 2-1/2" | Chuck speeds: 8.3 TO 28.5 RPM | Carriage travel: 24-3/4" | Front 3 jaw chuck: 32" | Rear 3 jaw chuck: 32" | Die head: QUICK...
Holland, OH
LAMINA DRILL PORTABLE MAGNETIC DRILLING & TAPPING MACHINE: STOCK #65532
- used
- Manufacturer: Lamina
Stock#: 65532
Holland, OH
LAMINA DRILL PORTABLE MAGNETIC DRILLING & TAPPING MACHINE: STOCK #65530
- used
- Manufacturer: Lamina
Stock#: 65530
Holland, OH
LAMINA DRILL PORTABLE MAGNETIC DRILLING & TAPPING MACHINE: STOCK #65526
- used
- Manufacturer: Lamina
Stock#: 65526
Holland, OH
RIDGID MODEL #535 PORTABLE THREADING MACHINE: STOCK #73512
- used
- Manufacturer: Ridgid
- Model: 535
Stock#: 73512 | Pipe theading capacity: 1/8" TO 2" | Bolt threading capacity: 1/4" TO 2" | Forward & reverseing: YES | Wrenchless type chuck: YES | Reaming attachment: YES | Pipe cutting attachment: YES | Phase:...
Holland, OH
2.5" REED #A22 3-DIE THREAD ROLLING MACHINE
- used
- Manufacturer: Reed
- Model: A22
419-269-2000 10559 Geiser Road Holland, OH 43528 Machine Information 2.5" REED MODEL #A22 3-DIE THREAD ROLLING MACHINE: STOCK #19703 Stock #: 19703
Holland, OH
8" OSTER #8R-RAPID PIPE THREADER THREADING MACHINE
- used
419-269-2000 10559 Geiser Road Holland, OH 43528 Machine Information 8" OSTER MODEL #8R-RAPID PIPE THREADER THREADING MACHINE: STOCK #22819 Stock #: 22819
Holland, OH
FLEX ARM MODEL S-36 PNUMATIC TAPPING MACHINE: STOCK #79468
- used
- Manufacturer: Flexarm
Stock#: 79468 | Reach: 14" TO 51" | Tap capacity: #6-9/16" | Torque: 28FT/LB | Rpm: 400 | Air: 90 PSI/ 28 CFM | Tap/drill head included: YES
Holland, OH
3" LANDIS LANHYROL 2-ROLL EXTENDED SPINDLE THREADING MACHINE: STOCK #65295
- used
- Manufacturer: Landis
CAPACITY: ROLLING PRESSURE: Stock#: 65295 | Min diameter of work: 0" | Max diameter of work: 3" | Diameter of work (special): 4" | Finest pitch (un or an): 48 THREADS PER IN | Coarsest pitch (un or an): 2 THREADS...
Holland, OH
27" GRIZZLY #G0756 HEAVY DUTY DRILLING & TAPPING SINGLE SPINDLE DRILL
- used
- Manufacturer: Grizzly
419-269-2000 10559 Geiser Road Holland, OH 43528 Machine Information 27" GRIZZLY MODEL #G0756 HEAVY DUTY DRILLING & TAPPING SINGLE SPINDLE DRILL: STOCK #16261 Stock #: 16261
Holland, OH
27" GRIZZLY #G0756 HEAVY DUTY DRILLING & TAPPING SINGLE SPINDLE DRILL
- used
- Manufacturer: Grizzly
419-269-2000 10559 Geiser Road Holland, OH 43528 Machine Information 27" GRIZZLY MODEL #G0756 HEAVY DUTY DRILLING & TAPPING SINGLE SPINDLE DRILL:: STOCK 16885 Stock #: 16885
Holland, OH