Processing » Shrink Wrapping Machines » Shrink Tunnels » Illinois

Building Filters

127

Used Shrink Tunnels in Illinois, USA

  • Shanklin T-72 Dual Chamber Heat

    Shanklin T-72 Dual Chamber Heat Tunnel – Variable Speed Shrink Packaging System

    • Manufacturer: Shanklin
    • Model: T-72

    73482004 Used Shanklin T-72 Dual Chamber Heat Tunnel Variable Speed Shrink Packaging System. Has variable temperature control for each chamber. Has a 22" W X 12" H X 84" L tunnel. Variable speed Teflon mesh con...

    Belvidere, IL
  • Tri-Pack ST1 4.5 Automatic Steam

    Tri-Pack ST1 4.5 Automatic Steam Tunnel for Shrink Sleeve Labeling

    • Manufacturer: Tri-PackTri-Pack

    73225007 Used Tri-Pack Model ST1 4.5 Automatic Steam Tunnel for Shrink Sleeve Labelers. Tunnel length approximately 6.5'. Steam consumption: 550 lbs/hr. Tunnel entrance/exit approximate 6-1/4" wide x 10" tall. St...

    Belvidere, IL
  • Nippon Tornado 2500 Shrink Tunnel

    Nippon Tornado 2500 Shrink Tunnel System | 39" Preheat | 380V | Hot Air Tunnel

    • Manufacturer: NipponNippon

    72969001 Used Nippon Technology Solution Ltd./Tornado Hot Air Shrink Tunnel System, type 2500. Preheat area 39" (1000 mm), Tornado 360 deg. hot air heating area 19.5" (500 mm) Blowing hot air from four directions...

    Belvidere, IL
  • Clamco Clamco Dem 4T 6T

    Clamco Clamco Dem 4T 6T 8T Double Chamber Tunnels

    • Manufacturer: Clamco
    • Model: 4T

    Durable High-Performance Shrink Tunnels The Clamco Heavy Duty Extra Large Heat Shrink Tunnels feature extra length when compared to our standard heavy duty tunnels and are perfect for packing, sealing, and shrink...

    Skokie, IL
  • Accraply 650VF Shrink Sleeve Label

    Accraply 650VF Shrink Sleeve Label Applicator – 650 CPM, Print Registration

    • Manufacturer: Accraply

    72393001 Used Accraply (Graham "Sleevit") Model 650VF High Speed Shrink Sleeve Label Applicator. Capable of speeds up to 650 Containers per minute (depending on application). Container size range: 1.1" - 6.6" or ...

    Belvidere, IL
  • Eastey Heat/Shrink Tunnel – Model

    Eastey Heat/Shrink Tunnel – Model 1610-48, 48" Chamber, Dual Fan System

    • Manufacturer: Eastey

    73463002 Used Eastey Heat/Shrink Tunnel, Model 1610-48. 48" Long chamber with variable temperature controls. Has dual fan system. Pass-through conveyor with variable speed controller. Last used with Hanagata L-Ba...

    Belvidere, IL
  • Shanklin T 9

    Shanklin T 9

    • Manufacturer: Shanklin
    • Model: T-9

    Sometimes, you just need more room. Our large capacity shrink tunnel is designed for those packages that are too large or too wide to fit through a T-7 Series tunnel. Large capacity features varying tunnel height...

    Skokie, IL
  • Shanklin F5A Automatic Side Seal

    Shanklin F5A Automatic Side Seal Shrink Wrapper with Texwrap Tunnel

    • Manufacturer: Shanklin
    • Model: F-5

    72984001 Used Shanklin Model F5A Automatic Side Seal Shrink Wrapper. Capable of speeds up to 75 packages per minute, and 90 linear feet per minute. Minimum package size: 3"-48" length; 1/2"-16" width; 1/8"-6" hei...

    Belvidere, IL
  • Shanklin T 71 T 81

    Shanklin T 71 T 81

    • Manufacturer: Shanklin
    • Model: T-71

    Combines Versatility, Technology and Performance Models T-71, T-81 This line of outstanding high speed shrink tunnels was created to solve the higher speed applications not requiring a dual chamber shrink tunnel....

    Skokie, IL
  • APM MSA-26SS Semi-Automatic Shrink Bundler

    APM MSA-26SS Semi-Automatic Shrink Bundler with Heat Tunnel

    • Manufacturer: APM

    73311001 Used APM Semi-Automatic Shrink Bundler, Model MSA-26SS. Set up for a 90-degree product infeed; 27.5" wide intermittent motion cross seal bar, with 6" long x 14" wide product hold down; 96" long x 24" wid...

    Belvidere, IL
  • Texwrap Model 1322-02 Dual Chamber

    Texwrap Model 1322-02 Dual Chamber Shrink Tunnel – Variable Speed Stainless Steel Mesh Belt

    • Manufacturer: Texwrap

    73482003 Used Texwrap Model 1322-02 Dual Chamber Shrink Tunnel Variable Speed Stainless Steel Mesh Belt at speeds from 0-160 feet per minute. Has variable temperature controls for each chamber. Has chamber dime...

    Belvidere, IL
  • Axon EZ-72-HT Dual Zone Styrotech

    Axon EZ-72-HT Dual Zone Styrotech Heat Shrink Tunnel – 72" Long

    • Manufacturer: AxonAxon

    73569006 Used Axon Dual Zone Styrotech Heat Shrink Tunnel, Model EZ-72-HT. Total tunnel length 72" x 10-1/2" wide x 14" tall. Dual zone convective air heat tunnel. 1/60/230 Volt.

    Belvidere, IL
  • Shanklin T 62 T62SS T72

    Shanklin T 62 T62SS T72 T 72SS

    • Manufacturer: Shanklin
    • Model: T-62

    This line of outstanding high speed shrink tunnels was created to solve the most persistent shrink challenges: keeping up with high speed automatic wrappers, processing product with heat absorptive surfaces, and ...

    Skokie, IL
  • Clamco Clamco 6022

    Clamco Clamco 6022

    • Manufacturer: Clamco

    The new 6022 Series heat shrink tunnel is built for performance, flexibility and value! The Clamco 6022 offers great performance with a smaller-size chamber designed for medium and intermediate applications. Feat...

    Skokie, IL
  • Eastey Eastey VS 1620 Combo

    Eastey Eastey VS 1620 Combo Unit

    • Manufacturer: Eastey
    • Model: VS1620

    Models VS1620 Value Series Combo Units The Value Series Combo Unit combines a rugged EASTEY L-sealer and shrink tunnel on a common frame with one power source. This allows for quick setup, perfect alignment and c...

    Skokie, IL
56789

Overview

Shrink tunnels are conveyorized heat chambers that shrink film around pre-wrapped products to produce tight, tamper‑resistant packaging. Items pass through on a belt while heated air or infrared elements shrink the film for a neat, stable bundle. Widely used in food, beverage, and industrial packaging, tunnels vary by tunnel length, belt type, heat control and throughput to match product size and production speed.

FAQ

What should I check when buying a used shrink tunnel?

Inspect belt condition, heater elements, fans, temperature controls (PID), insulation, conveyor drive and wiring. Ask for run-time tests, maintenance records, and photos of wear areas. Verify film compatibility and available spare parts.

How do I choose the right size and capacity?

Match tunnel width and conveyor height to your largest product, and choose tunnel length and heat capacity for the film type and required dwell time. Base capacity on packages per minute and planned production growth.

How is a shrink tunnel shipped safely?

Prepare by disconnecting utilities, securing moving parts and, if possible, removing fragile components. Shrink tunnels are usually crated or skidded and transported by flatbed or lowboy. Provide accurate dimensions, weight and forklift/liftgate requirements to the carrier.

What routine maintenance does a shrink tunnel need?

Regularly clean film residue, inspect and replace worn belts, check heater elements and fans, verify temperature accuracy, lubricate bearings and check electrical connections. Schedule preventive checks to avoid production downtime.

Are spare parts and service easy to find?

Availability depends on make and model. Common parts like belts, elements, thermostats and motors are usually available aftermarket. Confirm vendor support or local service options before purchase.