Used Processing in Ontario, Canada

Trusted Seller
2021 Schenck Process 18HRT3 FILTER
- Manufacturer: Schenck
• VACUUM RATING: 17″ HG; TEMP RATING: 250 °F • 304 SS CONSTRUCTION & CLEAN AIR PLENUM • WELD FINISH: EXTERIOR CLEANED FREE OF SLAG; INTERIOR RA32 MAX • VALVE: ¾″ DIAPHRAGM WITH 4″ GAS HEADER • TIMER: NEMA 4X ENCL...
$1,180 USD
Mississauga, Canada
Trusted Seller
2020 SCHENCK PROCESS FILTER ASSEMBLY
- Manufacturer: Schenck
COMPLETE WITH: -10 HP-575V-60-3 REGENERATIVE BLOWER. 3" NPT INLET AND OUTLET CONNECTIONS. CLASS I, GROUP D, CLASS II GROUPS F & G EXPLOSION PROOF MOTOR. BLOWER CASTINGS ARE ANODIZED FOR CORROSION RESISTANCE AND I...
$1,180 USD
Mississauga, Canada
Trusted Seller
2021 Schenck Process 39HSER4 FILTER
- Manufacturer: Schenck
• MEDIA AREA: 142.0 SQ FT • AIR-TO-MEDIA RATIO: 2.0 : 1 @ 275 CFM • VACUUM RATING: 17″ HG • CONSTRUCTION MATERIAL: 304 STAINLESS STEEL • EXTERIOR FINISH: 2B STAINLESS STEEL • INTERIOR WELD SURFACE FINISH: 32 RA M...
$1,321 USD
Mississauga, Canada
Stainless Tri-clamps
-Very large selection of various sizes. -Stainless -Tri-clamps
$11 USD
Brant, Canada
Trusted Seller
A&M Process SRB150T
- Manufacturer: A&M Process
316 stainless steel. The mixer is 36" wide x 30" long x 36" deep. Approximately 15 cubic foot working capacity. The lid lifts up and down with an air cylinder on the back. It has a 2.5" outside diameter sani clam...
Barrie, Canada
Trusted Seller
2021 Schenck Process RT FILTER 72RT32
- Manufacturer: Schenck
• MEDIA AREA: 299.5 SQ FT • AIR-TO-MEDIA RATIO: 6.7 : 1 @ 2000 CFM • VACUUM RATING: 17″ HG • CONSTRUCTION: CARBON STEEL (PRODUCT CONTACT & CLEAN AIR PLENUM) • COATING: FOOD-GRADE EPOXY ON CONTACT AREAS • VALVES: ...
$7,327 USD
Mississauga, Canada
Trusted Seller
2019 Voorwood L217NH double sided edge foiler
- Manufacturer: Voorwood
The Voorwood L217 Shaper Foiler is built to profile, sand, and apply transfer-finishing foil to both edges of MDF parts in a single pass. It’s capable of churning out over 27,000 lineal feet (around 8,200 meters)...
Ontario, Canada
Trusted Seller
Used American Process Systems 4 Cu Ft Double Ribbon Blender, Model DRB-4
- Manufacturer: Americal Process Systems
1 Used American Process Systems 4 Cu Ft Double Ribbon Blender, Model DRB-4. The blender is all stainless steel construction and was built in 1994. The heavy duty frame is steel and painted in “steel – it”. Blende...
Toronto, Canada
2006 NRG 844 – Meter Run Skid – 600 ANSI
- Manufacturer: Crimtech
Building Dimensions : 10' x 7 x 8.5'
Toronto, Canada
2006 NRG 842 – Meter Run Skid – 600 ANSI
- Manufacturer: Crimtech
Size: 3.0" JR Orifice
Toronto, Canada
2006 NRG 843 – Meter Run Skid – 600 ANSI
- Manufacturer: Crimtech
Size: 3.0" JR Orifice
Toronto, Canada
Type 4, 4X Glass Reinforced Polyester Enclosures
1590ZGRPBK Series Watertight, Thick Wall, NEMA 4X, IP66, UL Listed Key Features: Molded from black glass reinforced polyester. Smooth finish. Heavy duty thick wall design. Includes gasketed lid with two piece ton...
Guelph, Canada
2012 Henkel 1
- Manufacturer: Loctite
impregnation line include Resin refrigerator unit, Resin tank, Vacuum tank, Centrifuge, Clave station, Two wash tanks, Two cure tanks, Roller, Test equipment and three part fixtures.
$1 USD
Tecumseh, Canada
Trusted Seller
UNUSED ACG STAINLESS STEEL FLUID BED PROCESSOR, MODEL FBC 125 XꞏONE
- Manufacturer: ACG
Technical Specifications Pressure shock resistance (machine tower): 12 bar Design temperature fresh air intake: -10°C Inlet air temperature (Entry machine tower): 80°C Process air flow volume: 1500 m3/h Min....
Toronto, Canada
Trusted Seller
Used Zanchetta 10 Litre Full Containment High Shear Mixer
- Manufacturer: Zanchetta
- Model: Roto
1 Used Zanchetta 10 Litre Full Containment High Shear Mixer, Model Roto P-10. This is a "one-step" high shear, high speed processor to mix dry powders, to granulate by liquid binder, to dry by heat and vacuum. Eq...
Toronto, Canada