Used Processing in Flanders, Belgium

1995 FISCHER+RÜCKLE FLA Glue spreader

• Manufacturer: Fischer

Automatic veneer pack edge glueing machine Veneer pack length: from 300 mm on Veneer pack width: 40 to 400 mm Veneer pack thickness: 10 to 80 mm Feed speed: 30 m/min Capacity, depending on pack length, ca. 3 to 4...

1987 JOSTING ZFS 2800 Veneer pack guillotine

• Manufacturer: josting

Cutting length: 2810 mm. Veneer pack thickness: 80 mm. Cutting width: 20 to 470 mm., 1 top knife, 1 bottom knife, simultaneous cutting Hydraulische pressure beam Power installed: 9 kW Preselection of 16 different...

ADAMIK CO. AP 300/130 Vacuum Press

Dimensions of the press: 3000 x 1300 mm. Useful dimensions: 2850 x 1150 mm. Standard vacuum pump: 12 m3/h, on request 25 m3/h or 40 m3/h Temperature: 50 - 60°C 3 mm thick membrane, 700% elasticity Medium heating ...

2022 ASPIR 300 Stand-alone dust extractor

• Manufacturer: aspir

- pressure filter - fan : 7,5 kw - flow: 6.000 m³/h - connection : 300 mm - 3 drainers 260 liter - automatic cleaning of the filter bags - automatic extinguishing system - with silencer

POLYBOIS RAV 48 Feeder

• Manufacturer: polybois

Machine number: Tension: 400V 50Hz 3Ph

POLYBOIS RAV 34 Feeder

• Manufacturer: polybois

Machine number: Tension: 400V 50Hz 3Ph

2-ZAK Stand-alone dust extractor

Diameter bags 500mm Diameter suction 120mm Motor 2,2kW Machine number: Year of construction:

1995 VENTOMATIC TEC/T/30 PK Stand-alone dust extractor

32 sleeves, each with diameter 30 cm Capacity approx. 10000 m3/h Built-on fan, motor 22 kW, inlet 400 mm. 8 x bag diam. 600 mm Machine number:

2005 HYMMEN TLT Glue spreader

• Manufacturer: Hymmen

Working height 900mm Nominal width 1400mm Effective working width 1370mm Rolling pressure force max 5kN Passage height max 120mm Feed transport 6-50 m/min stepless/frequency controlled Plate width min 200mm Plate...

2005 HYMMEN KRP 1300 Sandwich panel press

• Manufacturer: Hymmen

Working height 900mm Nominal width 1300mm Effective working width 1270mm Rolling pressure force max 40kN Passage height max 120mm Feed transport 6-50 m/min stepless/frequency controlled Plate width min 200mm Plat...

1992 HACKEMACK KTR 2040 Drying equipment for stain and lacquer

• Manufacturer: Hackemack

UV dryer 1 lamp Cross bar transport Working width: 1.3 m. Number of units: 1 Total power: 12.2 kW UV dryer 5 lamps Cross bar transport Working width: 1.3 m. Number of units: 5 Total power: 62.4 kW shared electric...

HERAEUS Drying equipment for stain and lacquer

• Manufacturer: Heraeus - Hanau - Vötsch

dryer with IR lamps Cross bar transport Working width 1300 mm length of transport: 11m Machine number: Year of construction:

Drying equipment for stain and lacquer

Double Drying Rack 9 levels depth: 2 x 96 cm width: 90 cm height: 190 cm Machine number: Year of construction: Tension:

2012 FIN S.R.L. CLN 1800 Sandwich panel press

Roller length 1820mm Roller diamter 145mm Rubber thickness 9mm Rubber hardness SHORE 50A Working plane height 910mm Max passage between rollers 120mm Forwarding speed 15,2 m/min Requested air Bar 4/8 Motor power ...

1971 JOSTING QFS 1300 Veneer pack guillotine

• Manufacturer: josting

Workpiece width 1300mm Max height input 80mm 2 hand controls Front or side operation selectable Motor power 5.5 hp