Used Machine Tools in Saxony, Germany

Trusted Seller
ALLMATIC NC high-pressure clamps
- Manufacturer: ALLMATIC
NC high-pressure clamp with hydraulic spindle ALLMATIC - NC LC125 including one set of stepped jaws ! used, tested !
$938 USD
Zschepplin, Germany
Trusted Seller
BOSCH tin snips
- Manufacturer: Bosch
Sheet metal shears, high-frequency sheet metal shears, high-frequency tools, high-frequency machines BOSCH EW/HEP 64A4Z1 0.1 / 0.12 KW 2075 / 2775 strokes/min 200 / 265 V 3AC 150 / 200 Hz approx. 3.5 m connection...
$258 USD
Zschepplin, Germany
Trusted Seller
1999 WMW 5500x1500x250
- Manufacturer: WMW
- distance of T-slots = 542 / 500mm in a parallel offset order - T-slot according DIN 650 - a=28,0mm; h=48,0mm; b=48,0mm; c=22,0mm - incl. adjustment screws and covering caps i.D.
Leipzig, Germany
Trusted Seller
WMW 800x300
- Manufacturer: WMW
surface plate does have holes! Type of control: conventional | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 3 | Table length: 800 mm | Table width: 300 mm | Table height: 130 mm | Weight...
Leipzig, Germany
Trusted Seller
WMW 3-jaw chuck
- Manufacturer: WMW
3-jaw chuck, three-jaw chuck WMW DH 130 x 3 ( DH315x3 ) TGL 30-2333 Thread: M18 x 1.5, length: 20 mm ( left-hand thread ) bore: Ø 30 mm, depth: 55 mm used, tested !
$176 USD
Zschepplin, Germany
Trusted Seller
WMW 660x450
- Manufacturer: WMW
fall trough hole 115mm T-slots : according to DIN 650 and 508 a=22mm b=38mm h=40mm c=17mm
Leipzig, Germany
Trusted Seller
WMW dividing head
- Manufacturer: WMW
Dividing head, dividing head, dividing table, with tailstock WMW Type TU 100 ( TU100 ) dividing head: mounting: MK4 ( inside ) / cone Ø 51 / 54 mm x 10 mm ( outside ) Flange diameter: Ø 108 mm, bolt circle diamet...
$691 USD
Zschepplin, Germany
Trusted Seller
WMW AP 4000x2000x310
- Manufacturer: WMW
Cast steel plates T-slots according to DIN 650 a=25; h=62; b=51; c=25mm center stand T-slots= 250mm 16 pcs. countersunk holes Ø 33 + Ø 40 mm and 6 pcs. through holes Ø 120mm i.D.
Leipzig, Germany
Trusted Seller
WMW AP 3000x1775
- Manufacturer: WMW
Material of the plate = cast steel. incl. 6x adjustment screws M30 7pcs. T-slots according to DIN 650 a=35; h=60; b=62; c=26mm; center distance 250mm The clamping plate is equipped with a side fixing on the longi...
Leipzig, Germany
Trusted Seller
WMW AP 1100 x 700
- Manufacturer: WMW
Clamping plate, cast steel with T-slot according to DIN 650 a=25; h=41; b=48;c=24mm; center distance 76mm
Leipzig, Germany
Trusted Seller
WMW AP385x205x65
- Manufacturer: WMW
very good steel plate for sale free, packed in oiled paper and foil Surface ground Ra 0.8 according to drawing T-slots according to DIN 650: a=36; h=65; b=60 c=26mm, chamfered approx. 1.5mm Distance from edge: 10...
Leipzig, Germany
Trusted Seller
WMW AP 7200x2300x330
- Manufacturer: WMW
2 pieces of cast steel plates for sale free. Surface finished T-slots according to DIN 650: a=28mm; h=58mm; b=49mm; c=28, and distance T-slot to T-slot: 305mm The plates are equipped for side mounting/clamping co...
Leipzig, Germany
Trusted Seller
WMW AP 640x330x65
- Manufacturer: WMW
Type of control: other | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 1 | Floor-plate length: 640 mm | Plate width: 330 mm | Plate height: mm | Plate thickness: 65 mm | Machine weight a...
Leipzig, Germany
Trusted Seller
WMW AP
- Manufacturer: WMW
Spotting measuring plates No. 3 size 200 x 200mm with small quadrants No. 4 size 200 x 200mm No. 5: size 580 x 285mm No. 6: size 300 x 300mm No. 7: size 160 x 160mm No. 8: size 600 x 250mm No. 10: size 400 x 280m...
Leipzig, Germany
Trusted Seller
WMW 1530x1180
- Manufacturer: WMW
steel plate Type of control: other | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 3 | Length: 1530 mm | Width: 1180 mm | Height: 110 mm | Weight of the machine approx.: 500 kg | Transpor...
Leipzig, Germany