Used EDM Machines in Illinois, USA

Elox 8-2012 Sinker EDM Machine

Specifications*: SPEC Below for Elox 8-2012DR, should be similar, buyer should verify before purchase EXPECT FINISHES OF 125 Ra AND TOLERANCES OF +/-0.003″ 280 VOLT – 60 AMP Stroke – 8″ Plate Size – 9″ x 9″ Open ...

2021 EDM DRILLMATE 22I

• Manufacturer: EDM DRILLMATE

Equipped with: 12 station electrode changer | Hole-dia. (min): 0.008 in | Hole-dia. (max): 0.118 in | X: 16.0 in | Y: 12.0 in | Z: 19.0 in | Work-w: 21.5 in | Work-l: 14.0 in | Cnc controlled: Yes

EDM DRILLMATE 22I

• Manufacturer: EDM DRILLMATE

Equipped with: - This machine can by run unattended by nc programming or can run manually with XY handles - Digital Readouts X, Y & Z - Glass Scales X, Y & Z | Hole-dia. (min): 0.004 in | Hole-dia. (max): 0.157 ...

Elox 8-2012-DR Sinker EDM Machine

Specifications*: EXPECT FINISHES OF 125 Ra AND TOLERANCES OF +/-0.003″ 280 VOLT – 60 AMP Stroke – 8″ Plate Size – 9″ x 9″ Open Height – 9″ to 17″ Throat Clearance – 17.25″ Worktable Size – 20″ x 12″ Worktable Mov...

1999 MITSUBISHI EDM EA8

• Manufacturer: Mitsubishi
• Model: EA8

Equipped with: - Fan type cooler | X: 11.8 in | Y: 9.8 in | Z: 9.8 in | Table size-w: 13.7 in | Table size-l: 19.6 in | Worktank inside dimensions: 30 x 20 x 10" | Max. workpiece weight: 1210 Lbs. | C-axis: Yes ...

2011 MITSUBISHI EDM BA-8

• Manufacturer: Mitsubishi
• Model: BA-8

Equipped with: VERY LOW HOURS! | X: 12.6 in | Y: 9.84 in | Z: 8.66 in | Max. workpiece dimensions: 27.6 x 21.7 x 8.5" | Max. workpiece weight: 1100 Lbs. | Auto threading (yes/no): Yes | Submerged (yes/no): Yes |...

CURRENT EDM ST300

• Manufacturer: CURRENT EDM

Hole-dia. (min): 0.004 in | Hole-dia. (max): 0.256 in | X: 12.0 in | Y: 8.0 in | Z: 16.0 in | Work-w: 12.0 in | Work-l: 12.0 in

2003 MITSUBISHI EDM FA10M

• Manufacturer: Mitsubishi
• Model: FA10M

X: 13.7 in | Y: 9.8 in | Z: 8.6 in | Max. workpiece dimensions: 31.4 x 23.6 x 8.4" | Max. workpiece weight: 1100 Lbs. | Auto threading (yes/no): Yes | Submerged (yes/no): Yes | Taper angle: 15.0 | Taper height: ...

2019 Makino U3 Wire EDM

• Manufacturer: Makino
• Model: U3

0.05 Micron Scale Feedback (X,Y), Automatic Wire Threading Unit, Dielectric Fluid Height Setting Function, PICO Precision Guide System The 2019 Makino U3 Wire EDM is designed for manufacturers who value precision...

2001 MITSUBISHI EDM FA20

• Manufacturer: Mitsubishi
• Model: FA20

X: 19.6 in | Y: 13.8 in | Z: 11.8 in | Max. workpiece dimensions: 31.5 x 23.6 x 8.5" | Max. workpiece weight: 1760 Lbs. | Auto threading (yes/no): Yes | Submerged (yes/no): Yes | Taper angle: 15.0 | Taper height...

1999 MITSUBISHI EDM EX-22

• Manufacturer: Mitsubishi
• Model: EX22

X: 20.0 in | Y: 16.0 in | Z: 14.0 in | Table size-w: 30.0 in | Table size-l: 22.0 in | Worktank inside dimensions: 37.4 x 26 x 16" | Max. workpiece weight: 2200 Lbs. | Drop tank: No | C-axis: Yes | Tool changer:...

2003 MITSUBISHI EDM FA20

• Manufacturer: Mitsubishi
• Model: FA20

Equipped with: - Tooling shown on table not included. | X: 19.6 in | Y: 13.8 in | Z: 11.8 in | Max. workpiece dimensions: 31.5 x 23.6 x 8.5" | Max. workpiece weight: 1760 Lbs. | Auto threading (yes/no): Yes | Su...

1997 MITSUBISHI EDM EX8

• Manufacturer: Mitsubishi
• Model: EX8

Equipped with: * Price includes a second functional EX8 that is plain that can be kept on hand for parts. | X: 11.8 in | Y: 9.8 in | Z: 9.8 in | Table size-w: 20.0 in | Table size-l: 14.0 in | Worktank inside di...

2019 SST FE3 EDM Drill

Can-Cycle Setup Functions, Electrode Depth Compensation Function, Flexible Programming Function, HP1+ High Speed Discharge Circuit, Multiple Work Coordinate Systems, USB Port The 2019 SST FE3 EDM Drill is enginee...

Sodick AP500 EDM machine

• Manufacturer: Sodick
• Model: AP500

Good condition Sodick AP500 EDM machines available between 1997 and 1998 years. Located in USA and other countries. Click request price for more information.