Used Construction in Wyoming, USA

WACKER NEUSON (parts)

• Manufacturer: Wacker Neuson

All four drums have the same measurements. Approximately 8-inch center, 15 inches wide, 20 inches diameter.

2003 John Deere 110

• Manufacturer: John Deere
• Model: 110

Used 2003 John Deere 110 with loader bucket. The tractor does not run and is being sold as is.

CAT Loader Fork Attachment (5 ft)

• Manufacturer: Caterpillar

CAT Loader fork attachment. Adjustable width 8 ft max. 5 ft long forks.

CAT 3512 LE NATURAL GAS

• Manufacturer: Caterpillar
• Model: 3512
• Horsepower: 1,021 hp
• Engine displacement: 51.8 L

Parts Engine Cat G3512LE Natural Gas Engine 1400 RPM. Ran Frick Screw Compressor

Cat 3412 Natural Gas Sullair PDR32X Screw Compressor

• Manufacturer: Sullair

Cat 3412 Natural Gas Engine with Sullair PDRX32 screw compressor. Cooler, scrubbers, skidded

WAUKESHA F3524 GSI

• Manufacturer: Waukesha
• Model: 3524GSI
• Engine displacement: 58 L
• Engine weight: 6,804 kg

CAT 3176 Engine Assembly

• Manufacturer: Caterpillar
• Model: 3176
• Fuel type: diesel
• Engine displacement: 10.3 L

Pipe assortment

• Manufacturer: Pipe assortment

3" up to 10" Pipe Assortment 2125+ Feet, Sold by the Foot

1998 Detroit 6067bk60

• Manufacturer: Detroit

Detroit Series 60 Diesel Engine, 14 litre

PZ9 Powered by CAT 3508 Engine, Pump House

• Manufacturer: Caterpillar
• Model: C15
• Horsepower: 475 hp
• Aspiration type: Turbocharged Aftercooled

PZ9 Powered by CAT 3508 Engine, Pump House

Base Beam 5x15'x12"

• Manufacturer: BASE BEAM

(2) 5 feet by 15 feet by 12 inch Base Beams (2) 6 feet by 15 feet by 12 inch Base Beams (1) U shaped 3 by 15 by 12 Base Beam

2014 Detroit Diesel Engine EDDXH14

• Manufacturer: Detroit

Transmission Mercedes Model A 960 261 9603 AUTO/MANUAL 12 Speed Engine Hrs. 16,125 Engine Miles 651,545 Transmission and Engine Are Still Together

2023 John Deere 200G

• Manufacturer: John Deere
• Model: 200G
• Hours: 562 h

JDLINK Connectivity JDPWRTCH PSS 4.5L Engine FT4 700MM(28IN) Triple Semi Shoe Boom 1 Piece with Arm Cyl & Plumb 3.2M (10'6") Long Arm Cold Weather Package

2019 John Deere 250GLC

• Manufacturer: John Deere
• Model: 250G LC
• Horsepower: 188 hp
• Hours: 3,402 h

Shoes 800M 32" Triple Boom 1 Piece with Arm Cylinders Arm 3.61M 11'10" with Plumbing Engine Block Heater

2024 Npk GH7

• Manufacturer: NPK
• Model: GH-7
• Operating weight: 1,240 kg
• Hydraulic flow rate: 98.4 L/min

GH7 HAMMER CP W/G025 LUBE Clearance center: No | Available to buy online: No | Proposed ai description: The 2024 Npk GH7 Breaker is designed for high-performance demolition and construction applications. It featu...