Processing » Heat Exchangers » Shell and Tube Heat Exchangers » Texas

Building Filters

709

Used Shell And Tube Heat Exchangers in Texas, USA

  • EXCHANGERS 113270

    EXCHANGERS 113270

      Used 180 sq. ft. Horizontal 316L Stainless Steel Heat Exchanger. Mfg. by Bos=Hatten in 1982. Shell 100 psi @ 250 deg. F. Tubes 100 psi @ 250 deg. F. (77) 3/4" O.D. x 16 BWG.

      Cleveland, TX
    • EXCHANGERS 114743

      EXCHANGERS 114743

        Unused 3181 sq. ft. Horizontal heat exchanger. 10.18 Design duty (MMBTU/Hr). Mfg. by Fabsco Shell and Tube in 2023. Shell Design Rating: 295/FV psi @ 310 deg. F. Tube Design Rating: 230 psi @ 150 deg. F. Shell m...

        Cleveland, TX
      • EXCHANGERS 114742

        EXCHANGERS 114742

          Unused 284 sq. ft. Horizontal heat exchanger. Mfg by Fabsco Shell and Tube in 2023.. 2.32 Design duty (MMBTU/Hr). Shell Design Rating: 95/FV psi @ 300 deg. F. Tube Design Rating: 120 psi @ 150 deg. F. Shell mawp ...

          Cleveland, TX
        • EXCHANGERS 114713

          EXCHANGERS 114713

            Unused 569 sq. ft. horizontal heat exchanger. Mfg. by Wuxi Chemical Equipment in 2023. 1.625 Design duty (MMBTU/Hr). Shell Design Rating: 200/FV psig @ 300 deg. F. Tube Design Rating: 155 psig @ 300 deg. F. She...

            Cleveland, TX
          • EXCHANGERS 112852

            EXCHANGERS 112852

              Used 3007 sq. ft. U-Tube exchanger. Mfg. by Energy Exchanger Company. Previous Service: Makeup Water Trim Heater.

              Cleveland, TX
            • EXCHANGERS 112851

              EXCHANGERS 112851

                Used 1640 sq. ft. U-Tube exchanger. Mfg. by Energy Exchanger Company in 2011. Previous Service: Wastewater Cooler.

                Cleveland, TX
              • EXCHANGERS 102480

                EXCHANGERS 102480

                  BUILT IN 1999; 7750MM LENGTH; 950MM WIDTH; 1050MM HEIGHT; 119 SQM 316LSS TUBE VERTICAL HEAT EXCHANGER/EVAPORATOR; PRESSURE TUBE SIDE 40 BAR @ 297 DEG. C.; SHELL 25 BAR @ 297 DEG C.; 490MM DIAMETER X 7692 TOTAL ...

                  Cleveland, TX
                • EXCHANGERS 113869

                  EXCHANGERS 113869

                    Used 2686 sq. ft. Stainless Steel Heat Exchanger. Mfg. by Ohmstede in 2018. 38" shell diameter x 14'5" F/F. Shell: 150FV psi @ 350 deg. F. Tubes: 480FV psi @ 500 deg. F., (472 U's) 3/4" O.D. X .065" wall. 1" Sq....

                    Cleveland, TX
                  • EXCHANGERS 113483

                    EXCHANGERS 113483

                      Used estimated 745 sq. ft. Horizontal 316L Stainless Steel Heat Exchanger. Mfg. by Sisterville Tank Works in 2007. (190) 3/4" O.D. x 065" Tubes. 20" diameter x 20'0" F/F. Shell Rated 150 psi @ 20 to 320 deg. F. ...

                      Cleveland, TX
                    • EXCHANGERS 92399

                      EXCHANGERS 92399

                      • Manufacturer: WHITING

                      SURFACE CONDENSER HEAT EXCHANGER; MFG. BY WHITING; 304SS TUBESHEET; 174 STRAIGHT TUBES; 1.5" OD X 0.120" WALL THICKNESS X 24' LONG; 30" DIAMETER TUBE SHEET 1" THICK; DIAMETER IS 31" OD X 28' OAL, AND MOUNTS BY LU...

                      Cleveland, TX
                    • EXCHANGERS 102479

                      EXCHANGERS 102479

                      • Manufacturer: CO A S T

                      MFG. BY CO. A.S.T. IN 1992; 253.8 SQM 316L SS TUBE HEAD; CS SHELL VERTICAL HEAT EXCHANGER (RE-BOILER); 9000MM LENGTH; 2300MM WIDTH; 2000MM HEIGHT; DESIGN PRESSURE TUBE SIDE 22 BAR @ 300 DEG. C.; SHELL 8 BAR @ 2...

                      Cleveland, TX
                    • EXCHANGERS 114722

                      EXCHANGERS 114722

                        Unused 1121 sq. ft. heat exchanger. Mfg. by Wuxi Chemical Equipment in 2023. 14.275 Design duty (MMBTU/Hr). Shell Design Rating: 120 psig @ 150 deg. F. Tube Design Rating: 95/FV psig @ 300/300 deg. F. Shell mawp...

                        Cleveland, TX
                      • EXCHANGERS 114711

                        EXCHANGERS 114711

                          Unused 979 sq. ft. horizontal heat exchanger. Mfg. by Wuxi Chemical Equipment in 2023. 2.32 Design duty (MMBTU/Hr). Shell Design Rating : 150 psig @ 190 deg. F. Tube Design Rating: 120/FV psig @ 150/300 deg. F. ...

                          Cleveland, TX
                        • EXCHANGERS 86923

                          EXCHANGERS 86923

                          • Manufacturer: CAMDEN ALLOY

                          NORTH BOTTOM HPA EXCHANGER; MFG. BY CAMDEN ALLOY IN 1980;

                          Cleveland, TX
                        • EXCHANGERS 100430

                          EXCHANGERS 100430

                          • Manufacturer: HEATRAN

                          CONVERTER FEED EFFLUENT EXCHANGER (1000 T/D NH3 PLANT); MFG. BY HEATRAN;

                          Cleveland, TX
                        1112131415

                        Overview

                        Shell and tube heat exchangers are heavy-duty industrial devices that transfer heat between fluids using a bundle of tubes inside a pressure shell. They handle high temperatures and pressures, offer many material and design options, and are common in petrochemical, power, HVAC, and process industries. Used units are attractive because tubes can be replaced, but require careful inspection for corrosion, tube wear, leaks, and code compliance before purchase.

                        FAQ

                        What should I check when buying a used shell and tube heat exchanger?

                        Check design specs (flow rates, pressure, temperature), materials of construction, ASME or PED stamping, service history, tubing condition (wall thickness, corrosion, pitting), tube-sheet condition, end covers, and past repairs or thermal damage.

                        How do I prepare a shell and tube exchanger for shipping?

                        Fully drain and flush fluids, isolate and tag connected piping, remove fragile internals if recommended, coat exposed metal with preservative, secure tube bundle, protect nozzle faces and lifting points, and arrange appropriate heavy-haul transport and crane services.

                        What maintenance is needed after purchase to ensure reliable operation?

                        Start with a detailed inspection and pressure/hydrostatic test. Implement a cleaning plan (chemical or mechanical descaling), inspect and test tubes for leaks, replace gaskets, monitor for fouling and corrosion, and follow periodic inspections based on service severity.