Used Metalworking Measuring Instruments in Germany

Height breaker 300 mm from steel - 300 mm 13216

• Manufacturer: Stahl

Height gauge, parallel gauge -Hardmall needle Max. working height: 300 mm | Dimensions: 175/60 / H385 mm | Mass: 2 | Internal storage: 1P0002

Heidenhain LC 481 / 20 µm ML 370mm ID 353 703-03 Length Measuring Device 353703-03 LC481

• Manufacturer: Heidenhain

Storage wear possible. _Retail 3kg Age rating: No age restrictions | Country of manufacture: Germany | Content: 1 piece | Mass: 3000 g | Item condition: New as shown without original packaging

Height breaker 500 mm of steel - 500 mm 13217

• Manufacturer: Stahl

Height gauge, parallel gauge -Hardmall needle Max. working height: 500 mm | Dimensions: 615/120 / H75 mm | Mass: 4 | Internal storage: 1P0001

Height gauge 800 mm from – 800 mm 22567

Height ripper, parallel ripper Max. working height: 800 mm | Number: 2 pieces | Dimensions: 380/90 / H855 mm | Mass: 7,5 | Internal storage: 132701

Heidenhain AE LS 603 linear measuring system 326 792-01 H9 | ML 370mm | 336 972-6R H10

• Manufacturer: Heidenhain

This item originates from the liquidation of one of Germany's largest auto parts suppliers. The items were stored in elevators, so original packaging may be missing and some items may show signs of storage. H1R8C...

Karl Mahr 840 FS/So, 9105769, 150-200 mm, dial indicator snap gauge, parameter S

• Manufacturer: Mahr

Technical Specifications: - Rigid frame. Handle open on one side to prevent hand heat transfer; with heat-insulating grips. - Both measuring probes are made of long, stainless, hardened steel. - Measuring surface...

ECKEL Robograph 2 hysteresis meter flow meter

• Manufacturer: Ekel

The Robograph 2 is a digital hysteresis measuring device for magnetic segments and fabric samples. The ECKEL Robograph 2 is used to produce calibration pole housings for flux measurement of finished pole housings...

iMicro Tesa JMK3N4/40-100 inside micrometer No. 3 3-point internal micrometer

• Manufacturer: Tesa

Measuring range 40-100mm including the latest gauge information. _FP

100x Notched Cone 308000160160K Thread Self-Tapping

The Ensat serrated cone thread insert is a high-strength, self-tapping steel thread insert for producing durable, wear-resistant threads in materials with low shear strength. Designed for secure installation, it ...

Mitutoyo Height Master 515-318 height micrometer, 10-310 mm

• Manufacturer: Mitutoyo

Heightmaster Height Micrometer Height Master 515-318 Measuring range 10-310 mm Reading marks in 0.001 mm increments For calibrating and adjusting height gauges and marking devices, for example. Mitutoyo supplies ...

Calipers from INOX - 350 mm 22565

• Manufacturer: INOX

Caliper, caliper gauge, caliper gauge Measuring range: 0-350 mm | Number: 1x caliper available | Dimensions: 385/127 / H10 mm | Mass: 0,4 | Internal storage: 133005

Vernier caliper from – 0-1000 mm 35893

Caliper, caliper gauge, caliper gauge Caliper: Caliper with fine adjustment | Measuring range: 0-1000 mm | Measuring accuracy: 0,1 mm | Dimension: 1180/225/H15 mm | Mass: 2,5 | Dimensions: 1180/225/H15 mm

Depth gauge from CSE Inox - 0-300 mm 34188

• Manufacturer: CSE Inox

Depth gauge, depth caliper, caliper gauge, caliper gauge, depth caliper

Calipers from Format - 0-250 mm / 0-10 inch 34539

• Manufacturer: Format

Caliper, caliper gauge, caliper gauge Manufacturer: Format, caliper gauge Caliper gauge | Measuring range: 0-250 mm / 0-10 inch | Measuring accuracy: 0.05 mm / 1/128 in | Dimension: 360/140/H9 mm | Mass: 0,4 | Di...

Caliper from Mitutoyo - 0-750 mm / 0-30 inch 34009

• Manufacturer: Mitutoyo

Calipers, calipers, calipers, calipers Manufacturer: Mitutoyo, caliper gauge with fine adjustment | Measuring range: 0-750 mm / 0-30″ | Reading accuracy: 0.05 mm / 1/128″ | Dimension box: 1030/300/H50 mm | Mass: ...