Used Meat & Poultry Processing in Sweden

Cutting machine Berkel 834 S #2400

• Manufacturer: Berkel
• Model: 834

Tested works well 👍

Slaughter hanger without roll 48cm

About 15 in stock

Bizerba vs 12 #2169

• Manufacturer: Bizerba
• Model: VS12

Knife sharpener included The scale does not work. Work easily and smoothly

Vemag Robot 10 HP C with extractor LPG 202 #2153

• Manufacturer: Vemag
• Model: DP10C

Robot HP 10 C Change oil+Air filter vac pump. Replace relays on circuit board. Mounted used, Elobao central control that was missing. Year: 1999 Vemag LPG 202 New compressed air piston. Fixed air system. Fixed f...

Cuttingmachine Berkel EPB 834 Stacker -2010 #2048

• Manufacturer: Berkel
• Model: 834

Tested, works well 👍

Jarvis MG-1B

• Manufacturer: Jarvis
• Model: MG-1B

Cut fat beef brisket in 3 seconds. With a balanced drive system for smooth and quiet operation and less fatigue when handling the saw. Drive Hydraulic Cutting cycle time 3 seconds Cutting speed at 3500 rpm 35560...

Meathook for beef

Vacuumfiller Handtmann VF 200 #2690

• Manufacturer: Handtmann
• Model: VF200

Repaired circuit board for the lift Changed hydraulic oil New knee lever

Cutting machine Berkel EPB 834 -2007 #2616

• Manufacturer: Berkel
• Model: 834

Tested, works well

Maja ESB 4434/2P -2011 #2571

• Manufacturer: Maja
• Model: ESB 4434

New pressure roller New chain Tested works fine

Tenderizer Schröder MacMax 500 #2536

• Manufacturer: Schroeder

All bearings and seals new for the rollers. New radial seals on the gearbox. New button rubbers. Replaced feet. Reinstalled a magnetic switch. NOTE: The machine lacks switches for the in and out belts (bypassed)

Mixer grinder PSV HM 45l 98

• Manufacturer: PSV

Housing: 98mm Unger 5 (2 knives, 3 plates) Dimensions: 829 X 621 X 1299mm Volume: 45liter/35kg Weight: 110kg Capacity 600kg/h Motor: 3hp/2.2 kW Mixer: 0.75/hp/ 0.55kw

Mixer grinder PSV HM 45L 98ST

• Manufacturer: PSV

Dimensions: 828 X 632 X 661 Volume: 45liter/35kg Weight 90kg Capacity: 600kg/h Motor: 3hp/2.2 kW Mixer: 0.75/hp/ 0.55kw

Dice machine Treif Taurus -2003 #2492

• Manufacturer: Treif
• Model: Taurus

Disconnected power to the lift. Tested, works fine! Tool: 30x30mm

New. Dice machine Treif Felix 8x8mm

• Manufacturer: Treif
• Model: Felix

Brand new from the factory! 1 year warranty