Used Dairy Processing in Netherlands

1995 Karl Schnell 670

• Manufacturer: Karl Schnell

Hopper with 2 augers and excentric screw pump. Bottom of hopper stainless steel with stainless steel augers. Top part of hopper polycarbonate. Open top with 3 covers. 2 CIP spraybowls. Augers and excentric screw ...

1977 Alpma K-65/Ach

• Manufacturer: Alpma

Red cellufane wrapping for babby Edammer cheese diameter ±10cm - Motor 0,3 kW - Total dimensions 243 x 120 x 200cm.

Interceptor

Interceptor. Dimensions outside: Diameter: 36 cm .; Height: 5.4 m.

Mobile stainless steel bin

Mobile stainless steel bin. 83 x 43 x 92cm.

Tebel Cheese mould outblow device

• Manufacturer: Tebel

Cheese mould outblow device. Mould size ±38 x 38 cm. Infeed of the mould without lid upside down. First step cheese outblow of the mould. Second step lifting of the mould from the cheese (2 lifting steps to conve...

Hilge Hygia SI 25A

• Manufacturer: Hilge

1.5 KW, 3.4A, 2855rpm. Impellor diameter: 145mm. Pressure: 1.5 bar, Connections: inlet 1.5:", outlet: 1.5"DIN.

Stork HL-05

• Manufacturer: Stork

Stork HL-05 high pressure pump. Pressure up to 70 bar, piston diameter: 70 mm, stroke: 90 mm. Motor: 30 kW. Outside dimensions: 270 x 132 x 140 cm. Part of UHT line for Evap milk 6.000-9.000-10.500ltr/h (STN10544).

PRG 71 L2

• Manufacturer: Präzisions Rührer Gesellschaft (PRG)

Präzisions Rührer Gesellschaft (PRG) inline mixer. Motor 0,55 kW . N2: 635-106 rpm. 3x mixing points of 4 blades on the rotor. Effective rotor length: 30 cm, total rotor lenght: 35 cm. Connections: In 4''/2'' DIN...

1998 Schröder VR3

• Manufacturer: Schroeder

Visor engine, maximum working pressure 50 bar. 15 kW engine, 1460 rpm. Total dimensions: 170 x 80 x 100 cm.

2008 Self-cleaning filter

Self cleaning filter with pneumatic cylinder. Total length 184 cm.

Pin Mixer

• Manufacturer: N.N.

Pimixer for margarine, excluding motor including flange for motor. Diameter 115 mm, length 600 mm. 38 pins on the shaft. 60 pins on the housing.

Transport tank

Stainless steel vessel: cap with seal and butterfly valve on aluminium pallet. Inner dimensions: Ø 60 cm, height 70 cm. Outlet connection: 2" DIN11851.

Transport tank

Stainless steel vessel: cap with seal and butterfly valve on aluminium pallet. Inner dimensions: Ø 60 cm, height 70 cm. Outlet connection: 2" DIN11851.

Transport tank

Stainless steel vessel: cap with seal and butterfly valve on aluminium pallet. Inner dimensions: Ø 60 cm, height 70 cm. Outlet connection: 2" DIN11851.

2005 Goldpeg International 04/0382B

• Manufacturer: International

Vacuum tank. Flat to the side. Bottem product outlet, 3" tryclamp. middel-inlet 3" tryclamp, bottem-side outlet with pneumatic side valve 3 "tryclamp. Top connections 5 x tryclamp 4". Connections for: pt-100 tem...