Used Bottling Lines in Germany

2009 Heuft InLine reflexx + Spectrum

• Manufacturer: Heuft
• Model: Inline

Overview This empty bottle inspector was built in 2009 by the German manufacturer Heuft and is still in operation until the end of October. The machine is available as it is being converted to a new inspection so...

bottle rinser

Hot spraying of the empty bottles from below using nozzles on a 3 metre long cleaning section for pre-rinsing and to reach the filling temperature. Overturning of the bottles at the inlet and outlet of the machin...

2005 KHS Innopal AS1N

• Manufacturer: KHS
• Model: Innopal

Overview The glass depalletizer was manufactured by the German company KHS in 2005 and was until recently part of a bottling line in a German dairy company. The palletizer is now being released as the owner is sh...

2021 ALWID Posimat Access N15

• Manufacturer: ALWID

Overview The bottle unscrambler was manufactured in 2021 by the German company ALWID. It is part of a new filling line and can fill chemical products into plastic containers. The machine has ATEX certification, w...

2012 Heuft InLine IXs reflexx

• Manufacturer: Heuft
• Model: Inline

Overview The Heuft InLine IXs reflexx is an empty bottle inspector for quality control in filling lines. The machine was commissioned in May 2012, is in very good condition and is ready for use at short notice. T...

2013 Krones Handle applicator

• Manufacturer: Krones

Technical data - see pdf. document The machine is immediately available and has few operating hours Technical Specifications

2005 KHS Innopal

• Manufacturer: KHS
• Model: Innopal

Overview The palletizer was manufactured by the German company KHS in 2005 and was until recently part of a bottling line in German dairy company. The palletizer is now being released as the owner is sgutting dow...

Bottle de-crater

• Manufacturer: Matec GmbH

The VP 800 bottle packer and depacker is designed for automatic operation within the beverage industry.

glass bottle vacuum filler

• Manufacturer: Nagema

with 24 filling valves, frequency-controlled drive. Height adjustment for different bottle sizes. With vacuum supply to the filling vessel by vacuum blower. For filling, the bottles are first lifted via a hydrau...

PET filling line

• Manufacturer: KHS

PETCYCLE bottling line for water, lemonades and fruit spritzers. Bottle formats: 0.5 L, 1.0 L, 1.5 L Nominal output: 24,000 bottles/h (with 1.0 L) (currently only max. 18,000 bottles/h at the packer) The full bo...

2006 Heuft InLine TI 60 BFS2-r

• Manufacturer: Heuft
• Model: Inline

Overview The Heuft InLine TI 60 BFS2-r is an inspection system for empty PET bottles that was manufactured in 2006. With a maximum output of 36,000 bottles per hour, the machine is ideal for the efficient inspect...