Used Materials Testing in Flanders, Belgium

S248 : Permeameter stand 4 cells

Permeameter stand 4 cells This 4 cells capacity stand is designed to perform both constant head and falling head permeability tests on compacted granular soil samples. The stand consists of a metal frame with wat...

extension aluminium dia50, 150 mm for ANIX

Extension aluminium Ø50, 150mm, for plate load test

extension aluminium dia50, 100 mm for ANIX

Extension aluminium Ø50, 100mm, for plate load test

BLAINE AIR PERMEABILITY APPARATUS, ELECTRONIC, Semi-automati

Electronic Blaine air permeability apparatus with semi-automatic test-cycle, electric suction pump, time registration and measuring section with photoelectric barrier. After the test, automatic display of the tim...

A080-01KIT : Aggregate impact value apparatus

• Manufacturer: Macben BVBA

Aggregate impact value apparatus Standards : NF P18-574 Aggregate impact value apparatus. NF P18-574 Consisting of: • A080-04 Test frame assembly • A080-03 Cylindrical mould, dia. 102x50 mm v2021-12

A121 Rock cradle to ASTM D5873

• Manufacturer: Matest

Rock cradle to use with C381 rebound hammer Standard: ASTM D5873 It is the equippement used to locate EX or NX core rock specimens during the classification test by the Rock Hammer model C381. Weight: 20 Kg

S246-01 : Falling head permeameter

Falling head permeameter Standard : CEN ISO/TS 17892-11 Used to determine the permeability of fine-grained soils such as clay-like or silty soils. The specimen is confined within the permeameter which is connecte...

extension aluminium dia50, 50 mm for ANIX

Extension aluminium Ø50, 50mm, for plate load test

ZORN MINI 3.1 Leichtes Fallgewichtsgerät 120 mm breedte

• Manufacturer: ZORN

ZORN MINI - 3.1 Light Weight Deflectometer For determining the dynamic deformation modulus Evd in narrow trenches from 120 mm width Light Weight Deflectometer device for compaction quality testing following the p...

B059-10 ASPHALT IDENTATION PENETROMETER, EN 12697-20

ASPHALT INDENTATION PENETROMET., EN 12697-20 Comprising: - Rugged basic frame where the screw penetration load device is fixed. - Two interchangeable penetration pistons having 1 and 5 cm 2 surface. - Two metalli...

SA224 200 kN

AX 01a, Electronic Static Plate Bearing Test Device according to DIN18134:2012-04, CNR BU 146 1992-12, ÖNORM B4417:1979-12, SN 670 317b:1998, TSC 06.720:2003, SB250 4.16, SB2000, NF P94-117-1 : 2000-04, MSZ 2509-...

A122 : Barton combs (profilometers)

• Manufacturer: Lang

Barton combs (profilometers) Used for the evaluation of the surface roughness of rock samples. These simple devices allows very thin steel wires to perfectly lay to the outline of the sample under test, in order ...

A081-02 : Lightweight aggregates crushing resistance

• Manufacturer: Macben BVBA

Lightweight aggregates crushing resistance Standard : EN 13055-1 METHOD 2 Apparatus for the determination of the crushing resistance of lightweight aggregates having volumic mass lower than 150kg/m³. Composed of:...

S057 Field vane tester

Used to determine the shear strength of undrained (CU) cohesive soft soils, to firm non-fissured soils on site. The instrument consists of a T-handle cylindrical body where a torsional spring is housed, and three...

LABORATORY VANE APPARATUS

• Manufacturer: Matest

Matest Laboratory Vane apparatus represents a valid alternative to the most common standard triaxial equipment whenever a rapid estimation of the undrained shear strength of a soil specimen is required. Based on ...