New Cosmac Processing in Emilia-Romagna, Italy

COSMAC RMC25

• Manufacturer: Cosmac

This system allows you to dose, mix, and apply 2-COMPONENT resins using a manual dispensing gun. In the version equipped with a "color option," the resin can be colored with a third component (pigment) directly o...

COSMAC RMC25

• Manufacturer: Cosmac

This system allows you to dose, mix, and apply 2-COMPONENT resins using a manual dispensing gun.

COSMAC TM90

• Manufacturer: Cosmac

The small cutter �??TM 90�?� comes with a 600x600 mm anticorodal aluminium trolley to allow for highest-precision cutting of small or big formats, as well as for any type of grading, including bevel. Height...

COSMAC LAR

• Manufacturer: Cosmac

The LAR resin application line has been designed and developed for applying a fibreglass net on the rear side of tiles, using a special two-component resin. These tiles are used for the construction of ventilated...

COSMAC MIG1200

• Manufacturer: Cosmac

In order to glue the COSTA RETTA steps or the "V-CAP" elements obtained from the 45 degree-cut skirting tiles, it is necessary to use this accessory which reduces the processing time to the minimum and gives you ...

COSMAC MT400

• Manufacturer: Cosmac

Linear cutting machine with belt and hot galvanized structure in stainless steel. It\'s equipped with two cutting heads with supported shafts; the diamond disks for the cutting are assembled on chromium plated gr...

COSMAC TMFG 90

• Manufacturer: Cosmac

The new model of manual cutting machine TMFG 90, with the motor housed in the back part of the machine, allows the user to cut big sizes with no length limitation. This option is a big advantage since the market ...

COSMAC GIGA DRY RECTIFY

• Manufacturer: Cosmac

COSMAC MTJ3T

• Manufacturer: Cosmac

Jolly cutting machine with 3 heads, for large sizes. The tape width is 1600. The cutting heads (3) have an output of 4kW each. The machine is supplied abutment, with powered belt, to facilitate the transport of t...

COSMAC MT702 1T

• Manufacturer: Cosmac

Machine engraving on raw dry. The machine is equipped with various ports for the intake of dust created by the discs.

COSMAC 1 Testa / 1 Head

• Manufacturer: Cosmac

Linear cutting machine with belt and hot galvanized structure in stainless steel. It\'s equipped with one cutting head with supported shaft; the diamond disks for the cutting are assembled on chromium plated grin...

COSMAC LINEA DI TAGLIO MOSAICO

• Manufacturer: Cosmac

The automatic cutting line for mosaic has always been our strength, together with reliability and exactness of our cutting and material handling machines. The line is made up of: an ALV belt for the automatic fee...

COSMAC S16 1700

• Manufacturer: Cosmac

Linear belt cutting machine with hot galvanized and stainless steel structure, with three cutting heads with supported shafts; the diamond cutting discs are mounted on chromium-plated and retified shafts allowing...

COSMAC DRY CUTTING MACHINE

• Manufacturer: Cosmac

The DRY CUTTING MACHINE exploits a dry cutting system of the material applied to a rugged simple and versatile belt conveyor that allows the user to get a constant daily production. A well dimensioned incoming gu...

COSMAC 3 Teste / 3 Heads

• Manufacturer: Cosmac

Linear cutting machine with belt and hot galvanized structure in stainless steel. It\'s equipped with three cutting heads with supported shafts; the diamond disks for the cutting are assembled on chromium plated ...