Used Agitators

Clamp-on Agitator 1/2 HP

• Manufacturer: FHP

used Clamp-on Agitator. 1/2 HP, 1ph, 115 volt. Motor built by FHP Ind. approx. 1/2" dia x 30" L carbon steel shaft with (2) collapsible blades(5.75" diameter). Approx. 39" OAL.

Ekato HWL 2080 A Reactor Agitator 5.5kw 25.85:1

• Manufacturer: Ekato

“REFURBISHED” Model number: HWL 2080 A | Power: 5.5 KW | Ratio: 25.85:1 | Mpn: HWL 2080 A | Shipping weight: 354 lbs | Shipping dimensions: 34 x 32 x 17 in | Additional notes: REFURBISHED | Reference sku: 1683498

15 Cu. Ft. Stainless Steel Hopper with 3/4HP Agitator

Dry storage conical hopper (12GA. rolled & formed stainless sheet) One-piece cover with bracing and hinged lid 36" diameter with 10" straight side and 11" flanged outlet Slope of the cone is approximately 60° 2"Ø...

PHILADELPHIA MIXER PTEM-12-400

• Manufacturer: PHILADELPHIA MIXER

Philadelphia Mixer/agitator. Model# PTEM-12-400, s/n 306296. 1750 RPMi, 25 RPMo, 70.1:1 ratio. 15 HP, 1765 RPM, 230/460 V. Flange mount.

Clamp-On agitator, LEE model RG-4

• Manufacturer: Lee

used Clamp-On agitator, LEE model RG-4, # 918616. 3/4 HP, 115/230 volt, 1725 RPM motor into gear reducer. 6' stainless steel shaft with (2) approx. 11" Dia. turbine props.

Clamp-On Air Mixer

Used Clamp-On Air Mixer. 50" overall length. 35" L shaft with turbine type blade that is approx. 11" diameter. Pneumatic mixer.

1 Gal Morehouse Cowles Vacuum Mixer, Model ViscoMax, S/S

• Manufacturer: Cowles

1 Gal Morehouse Cowles Vacuum Mixer, Model ViscoMax, S/S Used 1 gallon Morehouse Cowles vacuum mixer, model ViscoMax, Type VML-1, stainless steel construction, dual shaft with anchor agitator driven by 1.5 hp mot...

Clamp-On Air Mixer

Used Clamp-On Air Mixer. 54" overall length. 39" L x 3/4" dia. stainless steel shaft. no blades. Pneumatic mixer.

Clamp-On Air Mixer

Used Clamp-On Air Mixer. 41" overall length. 29" L shaft with (2) 316 stainless steel prop type blades that are approx. 5" diameter. Pneumatic mixer.

BRAWN MIXER, INC SDA33

• Manufacturer: BRAWN MIXER, INC.

Brawn Mixer, Inc. Air Mixer, Model SDA33, Serial# 1602120. Video of unit running available. 45" overall length. 35.5" shaft length, 1/2" shaft diameter, 4.5" impeller diameter.

Groen DTA/3-60 60-Gallon 2/3-Jacketed Cooker/Mixer With Twin Shaft Agitators

• Manufacturer: Groen
• Model: DTA3-60

Unit is USED with visible minor surface wear and some minor scratches none affecting the functionality or the intended use of the unit. Inside of kettle is clean and free of any dried debris. Unit was removed fro...

5 Gal Reynolds Industries Dual Shaft Vacuum Mixer, Model 5/2

• Manufacturer: Reynolds

5 Gal Reynolds Industries Dual Shaft Vacuum Mixer, Model 5/2 Used 5 gallon Reynolds Industries dual shaft vacuum mixer, model 5/2 Dual Shaft Lab, stainless steel construction, high speed disperser(requires 5 hp m...

75/75/30 HP Myers Triple Shaft Vacuum Mixer, S/S

• Manufacturer: Myers

75/75/30 HP Myers Triple Shaft Vacuum Mixer, S/S Used Myers tri shaft vacuum mixer, model HV550/800AH-30-75-75, stainless steel shaft and blades with 75 hp high speed disperser blade, 75 hp second high speed disp...

GRACO 25C013 Control Air Elevator XD Agitator Series E21A

• Manufacturer: Graco

This listing is for a USED GRACO 25C013. It is designed for fluid agitation and elevation in spray systems. This unit is categorized as a Control Air Elevator XD Agitator and includes the following capabilities: ...

PFAUDLER GLASS COATED AGITATOR SHAFT - 44"Ø SPAN

• Manufacturer: Pfaudler

3.5"Ø SOLID CARBON STEEL SHAFT ENTIRELY GLASS COATED FROM DRIVE END. THE STEPPED-DOWN DRIVE CONNECTION IS 3.0"Ø X 2.25" LONG WITH A 0.75" KEYWAY. LIKELY DESIGNED FOR A 48"Ø TANK OR LARGER. OVERALL LENGTH: 91"