Used controller in Taiwan

Drop Tester

• Manufacturer: King Design Industrial

KD 688A Drop Tester Description Characteristics PLC control, linear motor fast speed control the height setting. Alarm warning before testing. Light support structure decreases the test impact. Support dropping...

Shock Tester

• Manufacturer: King Design Industrial

DP-1200 Shock Tester Description Shock or bump test mainly simulate the impact effects of product and its components encountered in usage and transit process. Through standard and high-reproducibility instant ene...

Cut Susceptibility Tester

• Manufacturer: King Design Industrial

Cut Susceptibility Tester Description Equipment conforms to IEC61730 MST12 specification. Pre- or post-round can be selected for control wiring connection. With weights block’s positioning pin is removed before t...

Air-arm-type Drop

• Manufacturer: King Design Industrial

KD-128A Air-arm-type Drop Description All new developing products must undergo several strict testing processes while in designing, manufacturing and packing/ shipping even. Our drop tester will provide data digi...

Dropping Impact Tester Confirm to JIS-A5403, K6745 Standard

• Manufacturer: cometech testing machines

The specimen is placed on the platform of machine. Choose a designated size of steel ball to fall freely from a height, then the steel ball will impact on specimen’s surface. To observe the specimen of damaged co...

Small Objective Drop Tester

• Manufacturer: King Design Industrial

KD-208 Small Objective Drop Tester Description ▲Customized order ▲Control cabinet panel 可依用戶需求訂製其他尺寸台面 標準型推力為200 kgF，可選購至1,600 kgF Inquire Now

Small Objective Drop Tester

• Manufacturer: King Design Industrial

KD-208A Small Objective Drop Tester Description .kdi-des tr:nth-of-type(odd) {background: #fff;} .kdi-des tr:nth-of-type(even) {background: #eee;} .kdi-des img {width: 200px; max-width:100%; margin-bottom: 5px; m...

Optical Film Abrasion Tester

WD-M013 is mainly use in light load friction test. Specimen placed on a movable platform, abrasion head is designed to be able to zero setting of original load and test load can be set to 50-2000g. Light friction...

Water Penetration Tester Confirm to AATCC127, JIS-L1092, ISO811 Standard

• Manufacturer: cometech testing machines

QC-317A can add water pressure in constant rate on tarpaulin, when water drop penetrate from tarpaulin, at this moment the pressure is hydrostatic pressure characteristic of tarpaulin. Water pressure method: Wate...

Vicat Heat Deflection Tester Confirm to ASTM D648 ISO 75-1 Standard

• Manufacturer: cometech testing machines

The specimen is given a fixed 10N force (or 50N) at the center with a standard Ø1 mm pin, and the temperature should increase by 50 (or 120) degrees Celsius per hour. When the penetration depth of specimen reache...

QC-528D3 Universal Testing Machine Confirm to ISO 7500-1 / ASTM E4 / ASTM D-76 / DIN 5122 / JIS B7721/B7733 / BS EN 1002-2 / BS 1610 / GB/T 228 Standard

QC-528D3 incorporates a specialized motor control and algorithm system that maximizes the performance of DC motors, bring them close to the capabilities of servo motors. This system automatically optimizes speed ...

QC-803M Motor Type Roller Confirm to JIS-C2107、Z0237、PSTC7、ASTM D3330、ASTM D1000 Standard

This model is designed for preparing adhesive tape peeling samples. It uses a standard rubber roller to evenly press the tape onto a stainless steel plate or other surfaces. Compared to manual application, the mo...

Fully-Automatic Jominy Hardness Testing System

JOMINY hardening energy test, hardening energy -Set the Jominy Test Piece on the table.-Input the measuring condition into control PC.-The Jominy test piece is conveyed by robot arm and set on the hardness tester...

Various Probes of Hardness Tester

The measurement accuracy of the hardness tester depends largely on the manufacturing process of the probe, including the selection of diamonds and the inlay grinding technology. Among them, the control of the acc...

QC-548D2 Computerized Tensile (Compression) Testing Machines Confirm to ISO 7500-1, ASTM E4 , ASTM D-76, DIN5122 , JIS B7721/B7733 , EN 10002-2, BS1610,GB T228 Standard

QC-548D2 is equipped with a 7-inch TFT touchscreen that enables standalone testing and supports optional micro-printer output for instant result printing. It is well-suited for production environments or applicat...