Used Sheet Metal Processing in Bavaria, Germany

2025 Coil-Tec 120 SBV sheet metal splitting system

• Manufacturer: Coil-Tec

Coil-Tec slitting line 1250 x 1.0 mm, working width 1250 mm, complete with 3 pairs of knives, with length measuring device, with automatic shut-off, with manual cross-cutting device, cutting capacity with 2 pairs...

2025 X-Cut 1250 Pro angled cutting sheet metal splitting machine

Brand new X-Cut 1250 Pro. Thanks to its bevel cutting capability, the X-Cut machine can not only cut straight strips lengthwise and crosswise, but the automated bevel cutting opens up many new possibilities for q...

2025 Sheet metal precision straightening machine type STO-ILSM 1300 x 35

• Manufacturer: Isitan
• Power requirement: 4 kilowatt

The ILSM 1300x35 is suitable for straightening sheet metal according to the sheet width specified in the straightening diagram and is used to remove distortions after laser cutting, punching, or shearing. The ste...

2025 Channel folding machine RAS DuctZipper V 22.10

• Manufacturer: RAS

DuctZipper RAS 20.10 V-shaped channel seaming machine Sheet thickness range 0.5–1 mm Minimum channel cross-section 100 x 100 mm Sheet thickness based on a tensile strength of 400 N/mm² The RAS channel seaming tec...

2025 Folding former RAS SpeedySeamer 22.09

• Manufacturer: RAS

The SpeedySeamer RAS 22.09 folding machine produces all types of folds for the ventilation and air conditioning industry quickly, cleanly, and reliably. With 9 forming stations and a line speed of approximately ...

2025 Folding former RAS SpeedySeamer 22.07

• Manufacturer: RAS

The SpeedySeamer RAS 22.07 folding machine produces all common fold geometries for the ventilation and air conditioning industry quickly and reliably. With 7 forming stations and a speed of approximately 16 m/mi...

2024 KRASSER OPTIMA longitudinal and transverse slicing plant

• Manufacturer: Krasser

Brand new Krasser longitudinal and cross-cutting line Type OPTIMA SC 1250x1.25mm Features: - Automatic adjustment of the splitting wedges - With 5 pairs of roller shears - With guillotine shear for cross-cutting...

2025 Chimney template FBU 200

• Manufacturer: Coil-Tec

Chimney template FBU 200 with 22-degree side panel incl. 1x stop strip FB 20-50° Design: Color RAL 50.12 light blue, detachable base, mobile, with 4 swivel casters Application: To quickly create a flawless chimne...

2025 Schlebach SLRST400 EVO splitting plant

• Manufacturer: Schlebach

The SLRST400 EVO is a compact slitting and cross-cutting machine that precisely cuts wide strip lengthwise and crosswise in a single pass. You can continuously adjust the infeed width from 200 to 1,250 mm; the 1...

2025 Schlebach RBM 25 curved arch machine

• Manufacturer: Schlebach

This robust round-arch bending machine is designed for convex bending of pre-profiled panels on dormers, arches, domes, and barrel roofs – for double standing seam profiles with and without clip relief in 25 mm h...

1999 Wuko installation machine

• Manufacturer: Wuko

Used and well-maintained Wuko double-sided erector with cross shear (without meter counter), machine with red motor, The machine has been professionally repaired, inspected, and cleaned and is fully functional....

1978 Schlebach Piccolo folding machine

• Manufacturer: Schlebach

Used Schlebach folding machine, in a wooden crate. Machine is sold as is, with age-related wear and tear, without functionality testing.

2025 Coil-Tec tape guide 1000 mm

• Manufacturer: Coiltec

Used belt guide Suitable for Rolli and Trolli 1000mm The machine will be professionally repaired, tested, and cleaned, and will then be fully functional. A test run will be performed. Stockert Machines is at ...