Construction » Flanders

Building Filters

13

Used sensor in Flanders, Belgium

  • Trusted Seller
    ATLAS COPCO XATS138KD-N-BP-PEWHEELSW.B.

    ATLAS COPCO XATS138KD-N-BP-PEWHEELSW.B.

    • Manufacturer: Atlas-Copco
    • Model: XATS 138 KD
    • Horsepower: 49 hp
    • Nominal power: 48.6 kW

    Capacity [m³/min]: 7 or 5.5 | Pressure [bar]: 7 or 10.3 | Engine: Kubota V2403-CR-T-E5B | Remarks: Emission Stage 5; 5.5m³/min at 10 bar or 7m³/min at 7 bar | Weight [kg]: 1300 | Power [kw]: 48.6 | Ce mark: ok |...

    Waregem, Belgium
  • Trusted Seller
    FL 240

    FL 240

    • Gross weight: 16,000 kg
    • Axle configuration: 4x2

    Fire: Volvo | Axles: 4x2 | Km: 519158 | Cylinder: 7146 | Suspension 1: Suspension air | Fuel: D | Cabin: small cabin | Highest permitted weight: 16000 | Article: Description | V155011164: Used ECU FCU control un...

    Bree, Belgium
  • Trusted Seller
    Kerax 430

    Kerax 430

    • Manufacturer: Renault
    • Model: KERAX 430
    • Horsepower: 430 hp
    • Gross weight: 26,000 kg

    axle broken dont run Fire: Renault | Euro standard: EURO 5 | Transmission: Automatic gearbox 12 | Axles: 6x4 | Km: 372245 | Cylinder: 10837 | Additional information: 6x4 | Wheel base: 4905 | Suspension 1: Suspens...

    Bree, Belgium
  • Trusted Seller
    FM 300

    FM 300

    • Manufacturer: Volvo
    • Model: FM300
    • Horsepower: 300 hp
    • Gross weight: 18,000 kg

    Fire: Volvo | Transmission: Manual 12 | Axles: 4x2 | Wheel base: 6306 | Tire profile 1: 25 | Tire profile 2: 25 | Tire profile 3: 0 | Tire profile 4: 0 | Tire profile 5: 0 | Tire profile 6: 0 | Tire size1: 315/8...

    Bree, Belgium
  • Trusted Seller
    Actros 1840

    Actros 1840

    • Manufacturer: Mercedes-Benz
    • Model: ACTROS 1840
    • Horsepower: 400 hp
    • Gross weight: 18,000 kg

    Fire: Mercedes | Transmission: Semi-automatic 8 | Axles: 4x2 | Km: 2483170 | Cylinder: 11946 | Wheel base: 4700 | Suspension 1: Suspension spring | Suspension 2: Suspension air | Tire profile 1: 50 | Tire profil...

    Bree, Belgium
  • Trusted Seller
    Renault

    Renault

    • Manufacturer: Renault
    • Gross weight: 19,000 kg
    • Axle configuration: 4x2

    Fire: Renault | Transmission: Automatic gearbox 12 | Axles: 4x2 | Cylinder: 7698 | Additional information: D WIDE | Wheel base: 5705 | Suspension 1: Suspension spring | Suspension 2: Suspension air | Tire profil...

    Bree, Belgium
  • Trusted Seller
    no-image_en.png

    ATLAS COPCO XATS138KD-N-BP-PEWHEELSW.B.

    • Manufacturer: Atlas-Copco
    • Model: XATS 138 KD
    • Horsepower: 48 hp
    • Nominal power: 47.9 kW

    Capacity [m³/min]: 5.5-7 | Pressure [bar]: 7 or 10.3 | Engine: Kubota E4B | Remarks: Emission stage: Stage 5 | Weight [kg]: 1300 | Power [kw]: 47.9 | Ce mark: ok | Length [m]: 3.48 | Width [m]: 1.59 | Height [m]...

    Waregem, Belgium
  • Trusted Seller
    no-image_en.png

    Arocs 2533

    • Gross weight: 26,000 kg
    • Axle configuration: 6x2

    Fire: Mercedes | Axles: 6x2 | Km: 258484 | Cylinder: 7698 | Suspension 1: Suspension air | Cabin: small cabin | Highest permitted weight: 26000 | Article: Description | V161004025: Used fuse box SAM Mercedes | B...

    Bree, Belgium
  • ZFG-3000 GPS 15 kg only

    ZFG-3000 GPS 15 kg only

      Light weight deflectometer ZFG-3000-GPS 15kg The device is used for the testing bearing capacity of compacted soil and aggregates. Whether there are building the fundations for a new motorway or just refurbishing...

      Sint-Niklaas, Belgium
    • Komatsu D61EXi/PXi-24

      Komatsu D61EXi/PXi-24

      • Manufacturer: Komatsu
      • Model: D61
      • Horsepower: 168 hp
      • Operating weight: 19,460 kg

      Automated dozing from rough cut to finish grade The D61EXi-24 / D61PXi-24 comes with a fully factory installed 3D Global Navigation Satellite System (GNSS) Machine Control system. Add-on components for machine co...

      Vilvoorde, Belgium
    • Komatsu D51EXi/PXi-24

      Komatsu D51EXi/PXi-24

      • Manufacturer: Komatsu
      • Model: D51
      • Horsepower: 1 hp
      • Operating weight: 8,500 kg

      Automated dozing from rough cut to finish grade The D51EXi-24 / D51PXi-24 comes with a fully factory installed 3D Global Navigation Satellite System (GNSS) Machine Control system. Add-on components for machine co...

      Vilvoorde, Belgium
    • Komatsu D85EXi/PXi-18

      Komatsu D85EXi/PXi-18

      • Manufacturer: Komatsu
      • Model: D85
      • Horsepower: 264 hp
      • Operating weight: 30,670 kg

      Automated dozing from rough cut to finish grade The D85EXi-18 / D85PXi-18 bulldozer comes with a fully factory installed 3D Global Navigation Satellite System (GNSS) Machine Control system. Add-on components for ...

      Vilvoorde, Belgium
    • Komatsu D65EXi/PXi-18

      Komatsu D65EXi/PXi-18

      • Manufacturer: Komatsu
      • Model: D65
      • Horsepower: 217 hp
      • Operating weight: 21,650 kg

      Automated dozing from rough cut to finish grade The D65EXi-18 / D65PXi-18 bulldozer comes with a fully factory installed 3D Global Navigation Satellite System (GNSS) Machine Control system. Add-on components for ...

      Vilvoorde, Belgium

    Overview

    Construction equipment encompasses a wide range of heavy-duty machines used for various tasks in construction projects. These include earthmoving machines like excavators and bulldozers, lifting equipment like cranes, and road-building machinery like pavers and rollers. This machinery is essential for tasks such as digging, lifting, demolition, and paving.

    FAQ

    What should I consider when buying used construction equipment?

    Check the machine’s age, operating hours, and overall condition. Verify maintenance records and inspect for any wear or damage. It's also wise to consider the availability of spare parts and service support.

    How can I safely transport construction equipment?

    Use a specialized transport service experienced in heavy machinery. Ensure the equipment is properly secured and protected during transit, and comply with all local regulations regarding oversized loads.

    What is the maintenance schedule for construction equipment?

    Regular maintenance includes checking fluids, inspecting hydraulic systems, and ensuring all moving parts are lubricated. Follow the manufacturer’s maintenance guidelines for specific intervals and tasks.