Construction » Emilia-Romagna

Building Filters

226

New Construction in Emilia-Romagna, Italy

  • CS 1429 960 LITERS ADR

    CS 1429 960 LITERS ADR DIESEL TRANSPORT TANK

      Polyethylene tank for diesel transport, approved by the Ministry of Transport and compliant with ADR regulations, UN marked. 960-liter capacity, equipped with a 12-volt battery-powered electric pump with a flow r...

      Castello d'Argile, Italy
    • CS 1387 12000 LITER POLYETHYLENE

      CS 1387 12000 LITER POLYETHYLENE TANKS

        POLYETHYLENE TANKS WITH A CAPACITY OF 12,000 LITRES, SUITABLE FOR STORAGE OF DRINKING WATER AND LIQUIDS IN GENERAL

        $2,294 USD
        Castello d'Argile, Italy
      • CS 1886 ADBLUE DIESEL TRANSPORT

        CS 1886 ADBLUE DIESEL TRANSPORT TANK

          Polyethylene containers for the transport of diesel fuel, fully exempt from ADR 1.1.3.1c. Transportable diesel tank made of rotationally molded linear polyethylene, with a reinforced lockable lid, complete with a...

          $1,118 USD
          Castello d'Argile, Italy
        • CS 3109 10,000 LITER UNDERGROUND

          CS 3109 10,000 LITER UNDERGROUND POLYETHYLENE TANK

            NEW, NEVER USED, UNDERGROUND POLYETHYLENE TANK WITH A CAPACITY OF 10,000 LITER, WITH AN EXTENSION FOR THE TOP HATCH, SUITABLE FOR HOLDING ANY TYPE OF LIQUID. TRANSPORTATION POSSIBLE

            $2,942 USD
            Castello d'Argile, Italy
          • CS 0420 POLYETHYLENE UNDERGROUND TANK

            CS 0420 POLYETHYLENE UNDERGROUND TANK

              POLYETHYLENE UNDERGROUND TANK WITH A CAPACITY OF 12,000 LITRES FOR WATER, FUEL AND OTHER LIQUIDS, AVAILABLE IN CAPACITIES OF 3000, 5000, 12,000 LITRES

              Castello d'Argile, Italy
            • Manitou MRT 3060 VISION+

              Manitou MRT 3060 VISION+

              • Manufacturer: Manitou
              • Model: MRT 3060 VISION

              MANITOU ROTATING TELESCOPIC HANDLER model MRT 3060 VISION+ NEW - EX DEMO; - max capacity 6 Tons, load centre 600 mm. - max. lifting height 29,9 mt., maximum outreach 25,7 mt. - engine Yanmar 4-cylinder 4.6 L....

              Piacenza, Italy
            • Trusted Seller
              FPT-IVECO diesel engine, power 175

              FPT-IVECO diesel engine, power 175 hp

              • Manufacturer: FPT

              N° 1 power-pack IVECO-FPT model N67MNTX20.00A800 water-cooled Power 175 hp with mechanical control STAGE IIIA With Side PTO Ready to install Visible at our workshop Price on request

              Fidenza, Italy
            • Trusted Seller
              2024 Electronic Components TDK; COSTECH;

              2024 Electronic Components TDK; COSTECH; MW; H&L - New electronic hardware

              • Manufacturer: TDK; COSTECH; MW; H&L

              Electrical Material, Electronic Components Hardware - New - Over 20,000 pieces Quantity - Description n. 449 - Filter TDK EPCOS B84142C02500S081 - (250A 2 Cells) n. 505 - Three-phase filter HIGH & LOW CORP. 15...

              Rimini, Italy
            • Manitou MRT 1845 360° 115D

              Manitou MRT 1845 360° 115D VISION

              • Manufacturer: Manitou
              • Hours: 10 h
              • Lifting capacity: 4,500 kg

              MANITOU ROTARY TELEHANDLER model MRT 1845 360° 115D VISION NEW - EX DEMO; - capacity 4500 KG. center of gravity 500 mm. - maximum lifting height 18 m., maximum outreach 15.2 m. - CONTINUOUS ROTATION 360° - Deutz ...

              Piacenza, Italy
            • Trusted Seller
              2022 Project PJ20_1500

              2022 Project PJ20_1500

              • Manufacturer: PJ20_1500

              1 Project brand drilling rig, model PJ20 installed on a towable trailer Doosan 205 hp water-cooled engine mast on stroke for rods of length 3000 mm; effective stroke 3800 mm Max pull 20 tons Rotation head wit...

              Fidenza, Italy
            • Trusted Seller
              D20C 6.0 – DRILLING RIG

              D20C 6.0 – DRILLING RIG 20 MTON

              • Manufacturer: WEI

              The WEI 20-C Serie is here. WEI is pleased to introduce the 20 Ton Rigs Serie. Heavy Duty Hydraulic Drilling Rigs, for geothermal and waterwells. They can be customized with many opt...

              Fiorenzuola d'Arda, Italy
            • Trusted Seller
              D20C 7.5 – DRILLING RIG

              D20C 7.5 – DRILLING RIG 20 MTON

              • Manufacturer: WEI

              The WEI 20-C Serie is here. WEI is pleased to introduce the 20 Ton Rigs Serie. Heavy Duty Hydraulic Drilling Rigs, for geothermal and waterwells. They can be customized with many opt...

              Fiorenzuola d'Arda, Italy
            • Trusted Seller
              DUAL DERRICK

              DUAL DERRICK

              • Manufacturer: WEI

              The best result of high knowledge and experience in the Oil and Gas sector. Dual Derrick for Offshore semi-sub. Completely made and pre-assembled in WEI Facility. Manufactured and de...

              Fiorenzuola d'Arda, Italy
            • Trusted Seller
              DS250 17 PL – DRILLING

              DS250 17 PL – DRILLING RIG 250 MTON

              • Manufacturer: WEI

              Hydraulic Drilling Rig for Oil and Gas-wells till 6.800 mt. For Offshore Application. Skid mounted, Sliding mast, Rig completed by Top Drive, Hydraulic Power Tong, Rotary Table with Automatic ...

              Fiorenzuola d'Arda, Italy
            • Trusted Seller
              DS230 E – DRILLING RIG

              DS230 E – DRILLING RIG 230 MTON

              • Manufacturer: WEI

              Hydraulic Drilling-Workover Rig, for geothermal, Oil and Gas-wells till over than 6.000 mt. Skid mounted, Sliding mast, Rig completed by Top Drive, Hydraulic Power Tong, Rotary Table with Automatic Powe...

              Fiorenzuola d'Arda, Italy
            12345

            Overview

            Construction equipment encompasses a wide range of heavy-duty machines used for various tasks in construction projects. These include earthmoving machines like excavators and bulldozers, lifting equipment like cranes, and road-building machinery like pavers and rollers. This machinery is essential for tasks such as digging, lifting, demolition, and paving.

            FAQ

            What should I consider when buying used construction equipment?

            Check the machine’s age, operating hours, and overall condition. Verify maintenance records and inspect for any wear or damage. It's also wise to consider the availability of spare parts and service support.

            How can I safely transport construction equipment?

            Use a specialized transport service experienced in heavy machinery. Ensure the equipment is properly secured and protected during transit, and comply with all local regulations regarding oversized loads.

            What is the maintenance schedule for construction equipment?

            Regular maintenance includes checking fluids, inspecting hydraulic systems, and ensuring all moving parts are lubricated. Follow the manufacturer’s maintenance guidelines for specific intervals and tasks.