Used Construction in Berlin, Germany

2004 O&K Fahrerkabine

• Manufacturer: O&K

Complete driver's cab for O&K mobile and crawler excavators, good condition, glazing completely in order, with sturdy roof protection grille The offer refers exclusively to the driver's cab without installations ...

1992 DELMAG RH 0912

• Manufacturer: Delmag
• Model: RH 0912
• Hours: 12,241 h
• Machine weight: 46,000 kg

Year of Construction: 1992 Drilling Depth: 27 m Operating hours: 12241 | Drilling depth: 27 m | Tractive force: 150 kN | Compressive force: 150 kN | Carrier machine: O&K TGD 12-3 | Weight: 46 t

1997 KLEMM KB 3010

• Manufacturer: Klemm
• Hours: 7,100 h
• Machine weight: 30,000 kg

Anchor Drilling Machine, Vertical Drilling Rig "Klemm KB 3010 Jet Grouting Rig" Year of Construction: 1997 With two Mast Extensions, Length 4 m and 6 m

1992 Liebherr HS842HD

• Manufacturer: Liebherr
• Model: HS 842 HD
• Hours: 16,500 h
• Capacity: 42,000 kg

LIEBHERR HS 842 HD Year of Construction: 1992 1 * Articulation Piece 4.16 m / 2 * Intermediate Boom 3.1 m / 2 * Intermediate Boom 6.1 m / 1 * Head Piece 6.6 m) 2 * 16 t of Winches

1990 FASTI 509-15/20

• Manufacturer: Fasti

Hydraulic Plate Shear "FASTI 509-15/20" - Year of Construction: 1990 - Automatic Back Stop, Digital Control "ELGO Electric Type 85" - Roller Table, 5 Heavy Roller Racks, 12 Roll Support Tacks - Overfloor Mounting

1995 Liebherr HS 853HD Litronic

• Manufacturer: Liebherr
• Model: HS 853 HD
• Horsepower: 536 hp
• Hours: 17,000 h

Running gear new Hydraulic pumps renewed engine as good as new type: dragline excavator Year of construction: 1995 Approx. 17000 Bh Weight 80 t counterweight 22 to boom mast 21,5m 2 x winch 25 t link piece 5,5m b...

1995 Liebherr HS843HD

• Manufacturer: Liebherr
• Model: HS 843 HD
• Hours: 12,309 h
• Capacity: 60,000 kg

Serial no. 183.283 Year of construction: 1995 Approx. 12309 Bh Width 3700mm length 11000mm height 3400mm Weight 38.4 tons. Counterweight 12.3 tons boom mast 20.5m 2 x winches 20 tons. boom foot 5.5m boom extensio...

2008 BOART LONGYEAR BASE 102

• Manufacturer: Boart Longyear
• Hours: 11 h

- Standard Mast DM200 with Feed Gear (pull down/pull back force 100kN [22.5K lbf], total length 6m [19.7 ft], 2-piece sectional construction 4.5m [14.8 ft] and extension 1.5m [4.9 ft] - Hydraulic OilTank (460 l [...

Piling and pulling device ABI 5-fold

Hydraulic drive Mass: 11 t

Piling and pulling device PVE 4125 4-fold

4 cylinders Mass: 11 t

1989 Soilmec MGT 1000

• Manufacturer: Soilmec
• Machine weight: 4,800 kg

This unit can be attached to drilling rigs. An optional hydraulic power pack is available. Immediately ready to work.

1998 Hazemag EH 185 K

• Manufacturer: Hazemag
• Hours: 250 h
• Gross weight: 9,800 kg

Clamping force: min. 30 kN Operating hours: 250 | Pulling force: 30 kN | Torque kn: 2.100 | Total weight: 9.800 kg | Centre distance: 2.000 mm | Specific ground pressure: 9.4 t/m2 | Ground clearance: 180 mm | Ggr...

2004 O&K Hydraulikzylinder MH 5.5 / Compact

• Manufacturer: O&K
• Model: MH 5.5
• Machine weight: 190 kg

Boom cylinder from storage machine suitable for O & K mobile and tracked excavator MH 5.5; MH 5 Compact; MH 5 S two-way device; RH 5.5; RH 6 Compact suitable for part numbers 4531106 This is only a small excerpt ...

2004 O&K L 25.5

• Manufacturer: O&K
• Model: L 255

used wheel hub complete for front axle O & K wheel loader L 25.5 O & K part no. 2806121 differential complete O & K part number 2494543 plate / bevel gear set O & K part number 2494484

1996 O&K L 25;30

• Manufacturer: O&K
• Machine weight: 350 kg

2 pcs. wheel hubs / wheel hub complete O&K part number 4920786 from rear axle O&K wheel loader part number 4922243 bevel and ring gear O&K part number 4922238 2 pcs. wheel hubs / wheel hub complete O&K part numbe...