Used separator in Australia

2015 COMPAIR C50

• Manufacturer: CompAir
• Model: C50
• Horsepower: 47 hp
• Hours: 1.5 h

Compair C50 Trailer Mounted Air Compressor, 2015 Model, 13 Hours showing, 49 Horsepower Yanmar Diesel Engine, 7 Bart Working Pressure, 180 CFM, 2 Rear Outlets, 1000 KG, Isolator and E-Stops Located Rockhampton QL...

Jacon FILTER, FUEL WATER SEPARATOR SHOTCRETER

• Manufacturer: Jacon

FILTER, FUEL WATER SEPARATOR SHOTCRETER

Flextool Porta Trowel FPT30

The Porta Trowel’s lightweight design improves operator safety and allows for earlier commencement of concrete finishing when compared to heavier walk behind machines Matched with multi-use combination blades and...

Husqvarna Floor Grinder PG 510

• Manufacturer: Husqvarna
• Model: PG510
• Horsepower: 4 hp
• Machine weight: 120.2 kg

The PG 510 is a planetary floor grinder with three grinding discs and a total grinding width of 515 mm. It is suitable for removing coatings, grinding and polishing concrete, etc. The grinding head on the PG 510 ...

Flextool PortaScreed Honda 1.5 hp Petrol FPS-3

• Manufacturer: Honda

Honda 1.5 hp Petrol Featuring high frequency vibration across the entire width of the extrusion blade, the Flextool PortaScreed FPS-3 delivers accurate and high-quality screeding that is much faster than traditio...

Flextool TuffTruk Electric 24 V EB500

Electric 24 V The Flextool TuffTruk EB500 is designed for use in the construction, hire and manufacturing industries. Ideal for interior demolition, general construction, landscaping and utility work, the Flextoo...

Flextool TuffTruk Electric 24 V B450E

Electric 24 V The Flextool TuffTruk B450E is designed for use in the construction, hire and manufacturing industries. Ideal for interior demolition, general construction, landscaping and utility work, the Flextoo...

Husqvarna K 970 Chain Saw

• Manufacturer: Husqvarna
• Model: K970
• Machine weight: 11.02 kg
• Maximum Cutting Depth: 127 mm

The petrol power cutter Husqvarna K 970 two-bolt Chain has a unique cutting depth, allowing you to cut 450 mm from one side. It can also make openings as small as 12 x 12 cm, which makes it perfect for irregularl...

Flextool TuffTruk Honda 6.5 hp Petrol B450G

• Manufacturer: Honda

Honda 6.5 hp Petrol The Flextool TuffTruk B450G is designed for use in the construction, hire and manufacturing industries. Ideal for interior demolition, general construction, landscaping and utility work, the F...

Commando Mini Skidsteers AM232PT

GENERIC HITCH 4 IN 1 BUCKET WITH BOLT ON TEETH 3RD VALVE WITH ITALIAN FLAT FACE COUPLINGS HANSA-TMP HYDRAULIC PUMPS SEPARATE DANFOSS DRIVE MOTORS HYDRO CONTROL (ITALY) SINGLE JOYSTICK CONTROL. 23HP Honda GX690 En...

SWEEPER TRUCKS (AS990)

Air mass flow: 32000 m³/h Gross hopper capacity 9.5 m³ 52 dec tipping angle 340 hp Deutz TCD 7.8 l engine Sweeping speeds upto 40 km/h Separate, Rust-free 2,000 L (528 Gal) Water Tank

Honda - Generator - EU70is

• Manufacturer: Honda

FIRST TIME FUEL INJECTION For the first time in a Honda generator, the EU70is is coupled with an advanced Electronic Fuel Injection system greatly increasing fuel efficiency. In fact, the EU70 will run for up to ...

BUTLER EX 30 TONNER

• Manufacturer: Butler

Magnet , Ex 30 Ton Komatsu Excavator 220 Volt D.C Butler , Comes with Controller valued at $8000 Dimensions 1490 mm + 900 mm Has 2 separate rectangular magnets that could be unbolted and used separate. Weight 203...