- Trusted Seller
88 in. x 28 ft. ALmix Portable Parallel Flow Drum
used
- Manufacturer: ALmix
-88” diameter x 28’ long shell -Parallel Flow with Center Entry RAP Collar -Slinger Belt type feeder with 5HP Drive -Four(4)heavy duty 25HP Trunnion Drives -Hauck SJO4520 burner with 100 HP Blower, currently oper...
USA - Trusted Seller
88 in. x 28 ft. Cedarapids Portable Counterflow Dryer
used
- Manufacturer: Cedarapids
-Nominal 88” x 28’ shell -Reported in good condition -50 HP Cradle Chain Drive with a heavy-duty Concentric Shaft type gear reducer -Right Hand Discharge (from burner end) -Maxon Type 592 Burner -Genco Genie Semi...
USA - Trusted Seller
New Wemco-Style Round Tank Flotation cells
new
- Manufacturer: Wemco
- New round tank flotation cells - Made to order in North America - Complete with mechanism - All necessary cell and mechanism parts coated with protective 520 natural rubber (including discharge flume) - Feed, u...
USA - Trusted Seller
Triple Start Spiral Concentrators
used
Triple Start Spiral Concentrators - Effective and low-cost solution for gravity separation - 24 units available - "Triple start” type - They accept up to 3 different streams of feed - Includes distributors and la...
USA - Trusted Seller
300 Sq Ft model 30 US Filter Auto Jet Leaf Filter
used
- Manufacturer: US Filter
- 300 Sq Ft pressure leaf filter - Auto Jet - Made by US Filter - Self cleaning - 316 stainless steel - Approximately 25 cubic foot capacity, 700 gallons - 54 x 60 inch drum - 150 PSI and 200F rating - 10 inch di...
USA - Trusted Seller
New Denver-style Sub-A flotation cell mechanisms
new
- Drop-in replacement of Denver Sub-A flotation mechanism - Complete mechanism with rubber coated standpipe and wear parts - Interchangeable with original Denver Equipment Company mechanisms - Made in North Ameri...
USA - Trusted Seller
Model 120 Wemco Flotation Cell Mechanisms and Tanks
used
- Manufacturer: Wemco
- Wemco model 120 Flotation cell mechanisms and tanks - Rubber and Polyurethane wear parts - Removed and ready for inspection or shipment - Available as bare mechanisms for spares, or as complete used cells with ...
USA - Trusted Seller
100 Cu. Ft. MinPro flotation cells
refurbished
- 32 cells available; 1 bank of 12, 2 banks of 10 - 100 cubic feet per cell - Cleaned, painted, tested - Rubber and bearings in good condition - Motors, belts, and pulleys included - - Launder boxes required - Pr...
USA - Trusted Seller
Wemco 164 Flotation Mechanisms
used
- Manufacturer: Wemco
Wemco model 164 Flotation Mechanisms - For 1,000 cubic foot square tank - Rubber wear parts - Removed and in storage - Operates with 100 HP motor (used, included) - 3 units available - Offered as is - EX works st...
USA - Trusted Seller
Denver Flotation Mechanisms
used
Denver Flotation Mechanisms 2 units, approx. 8 ft long - Urethane 27.5 in. diameter rotors and 36 in. diameter stators - 30 in. diameter 4 belt sheaves 23 units, approx. 6' long - Urethane 27.5 in. diameter rotor...
USA - Trusted Seller
Flotation Level Control
new
Flotation Level Control Systems: Automated flotation tank level control through automated darrt valve actuator - Rosemount differential pressure sensor flange mounted to cells - Fisher Type 657 diaphragm actuator...
USA - Trusted Seller
New Unused Krebs style Cyclones Made to Order
new
- New and unused cyclones made to order in Krebs and Denver styles - Fully assembled - Interior covered with 1/4 inch thick vulcanized rubber - Victaulic connections for feed and discharge - Variety of Apex and I...
USA - Trusted Seller
18 x 10.5 ft (5.5 x 3.2 m) Fuller FLS SAG mill with 1,500 HP
used
SAG mill, 18 ft diameter, 10.5 ft length. - Manufactured by Fuller 1995 - Rubber-lined, used rubber liners included - 1500 HP, 4160 volt, 1192 RPM, continuous motor, 5010 frame Motor, rebuilt and inspected. - Sp...
USA - Trusted Seller
16.5 x 340 ft Svedala Rotary Kiln
used
- Manufacturer: Svedala
- 16.5 ft diameter rotary kiln - 340 ft total shell length - 4 cast steel tires - 4 sets of rollers, 72x30 inch - Steel support frame - 3 access doors and 2 observation doors - Flanged exhaust outlet - Multi piec...
USA - Trusted Seller
4,500 HP (3,355 kW) Louis Allis Motor; 1,785 RPM
used
- Manufacturer: Louis Allis
LOUIS ALLIS Armor Line 4,500 HP (3,355 kW) Motor: - 1785 RPM - 3 Ph - 60 Hz - 7411Z Frame - Type WPIIX - 4000 Volts - 556 Amps - Code E insulation - S.F. 1.0 - Continuous duty.
USA Relong TGM1800 Mineral Processing
used
- Manufacturer: Relong
- Model: TGM1800
Good condition Relong TGM1800 Mineral Processing available between 2022 and 2023 years. Located in China and other countries. Click request price for more information.
China