Used Conow Transportation & Trailers in Germany

Conow tilting bridge with wide-wall superstructure 80 cm high, variant 2.1

• Manufacturer: Conow

Floor panel 4 mm thick Profiled laser-welded drop sides Front and rear wall and right-hand side are firmly welded to the tipper body Left-hand full-length pendulum dropside with full-length central locking, opera...

Conow

• Manufacturer: Conow

Conow HW 60 V4.2

• Manufacturer: Conow

- Tipping bridge with combined body 120 cm - front, rear and right side walls are each continuous drop sides and firmly welded to the tipping bridge - the left side wall can be opened over the whole surface by me...

Conow HW 80 V2.5

• Manufacturer: Conow

- tiltable on both sides, with two center stanchions - both sides with two pendulum drop sides, center stanchion and central locking system - the front and rear walls are each continuous drop sides and are firmly...

Conow HW 80 V2.2

• Manufacturer: Conow

- Tilting bridge with wide wall 95 cm high - tiltable to the left (tiltable to the right on request) - with center stanchion - one side consisting of continuous firmly welded drop side - the side to be opened is ...

Conow HW 80 V4

• Manufacturer: Conow

Tipping bridge with multi-purpose superstructure V4 - tipper bridge with wide wall body 120 cm high - left side tiltable (or right side tiltable on request) - left side with two pendulum drop sides, middle stanch...

Conow HW 60 V4

• Manufacturer: Conow

- tipping bridge with wide wall 120 cm high - left side tiltable - left side with 2 pendulum drop sides, center stanchion and central locking system, - right side with continuous drop sides, firmly welded, - fron...

Conow HW 60 V9/V9.1

• Manufacturer: Conow

- Tipping bridge with multi-purpose body 120 cm high - left tiltable o. right tiltable (description for left tiltable) - profiled laser-welded drop sides - inside and outside 3-sided double welded drop sides, - s...

Conow HW 60 V3.1

• Manufacturer: Conow

- Tipping bridge with combined superstructure 95 cm high. - front, rear and one side wall are continuous drop sides and firmly welded to the tipping body - the other side with two longitudinally divided drop side...

Conow HW 60 V2.1

• Manufacturer: Conow

- Tilting bridge with wide wall 95 cm high - tiltable on one side, without center stanchion - Tipping bridge on the tipping side with reinforced outer frame profile 6 mm, - front and rear walls are firmly welded ...

Conow HW 80 V4.2

• Manufacturer: Conow

- Tipping bridge with combined superstructure 120 cm high - tiltable to the left (on request also tiltable to the right) - front, rear and one side wall are continuous drop sides and firmly welded to the tipping ...

Conow HW 80 V5.1 / V5.2

• Manufacturer: Conow

The heavy-duty chipper body is produced to fit the HW 80 trailer and the W 50 and L 60 trucks. This body variant is mainly used for transporting chaff, but also for transporting wood chips. As standard, the tailb...

Conow HW 60 V2.5

• Manufacturer: Conow

- Tilting bridge with wide wall structure 95 cm high - tiltable on both sides with two center stanchions - front and rear walls are firmly welded to the tipper body - both sides with pendulum tailboards, center s...

Conow HW 60 V3.2

• Manufacturer: Conow

- Tipping bridge with combined superstructure 95 cm high - front, rear and one side wall are each continuous drop sides and are firmly welded to the tipping body - the other side wall can be opened completely via...

Conow HW 80 V3.2

• Manufacturer: Conow

Tipping bridge with combined superstructure 95 cm high - tiltable to the left (tiltable to the right on request) - front, rear and one side wall are continuous drop sides and firmly welded to the tipping body - t...