Used Weaving

Chem-Aqua dual strainer filtration system

Chem-Aqua dual strainer filtration system with Shelco strainer Model BFS-1SB-2F Includes controls and 3 hp pump.

4 Meter, 1/8th Gauge, CMC Graphics Cut Pile Tufting Machine

4 meter, 1/8th gauge CMC graphics cut pile tufting machine. 24″ cam shifters. 4 inch yarn feed rollers each side. Currently tufting 145″. T120. WS2751

2006 5 meter 1/10 gauge Cobble ColorTec Tufting Machine

5 meter 1/10 gauge Cobble ColorTec cut pile tufting machine. M1. YOM 2006. Tufting 15 ft wide. Servo shifting, Servo in-feed and out-feed. Running 600 RPMs 1 Electrical panel with transformer. Voltage is 460 Volt...

Cohutta Warper with Load Cells

Cohutta warper with load cells, coated drum, adjustable comb and 128 end creel. (Warper # 3) Uses 54.25″ section beams up to 36″ diameter. 480 Volts

Cohutta Warper with Load Cells

Cohutta warper with load cells, coated drum, adjustable comb and 128 end creel. (Warper # 6) Uses 54.25″ section beams up to 41″ diameter. 480 Volts

Unroll Cradle with 8″ X 130″ rollers

Unroll cradle with 8″ X 130″ rollers. Bottom 2 rollers are driven. 60″ wide at the top. Adjustable side guides. On v-groove wheels. Like new condition.

Jensen T444, 800 lb Capacity Dryers

• Manufacturer: Jensen

Jensen model T444 800 lb capacity Dryers 480 volts 60 amps full load Nat and LP gas. (design standards UL 508A) 3 available

Jensen PC427, 800 lb capacity dyeing/extracting machines

• Manufacturer: Jensen

Jensen model PC427, 800 lb capacity dyeing/extracting machines. 480 volts 125 PSI steam required 545 max RPM. Using Softrol system for dye dispensing. 3 available

Two Controllers and Horn for TISI Ultrasonic Backing Seamer

Dukane Model 2120LN4-HL1 ultrasonic controller. Sonics & Materials EC1000S-34 ultrasonic controller. 20 kHz, 1000 watts. Ultrasonic horn for use with TISI backing seamer. All tested and working.

Gravity Conveyor

Gravity roller conveyor. 10′ sections. Overall width is 16″ to 36″. No legs. Several hundred pieces available. WS2670

2002 Tuftco 15′, 3/16th gauge loop pile tufting machine

Tuftco 15’, 3/16 th gauge loop pile tufting machine. YOM 2002. 5″, front side yarn feed with eccentric roller. Tufting 179″ wide. Includes Inverter. WS2656.

Unisorb V-100 Epoxy Grout

Unisorb Standard V-100 two-component epoxy resin system, offering excellent flowability, high resistance to impact and extremely rapid cure. Standard V-100 is a perfect choice for grouting machine bases, setting...

SciMatCo 6 Gallon, Bench Flammable Cabinet

SciMatCo 6 Gallon, Bench Flammable Cabinet, Manual Close, 16-3/4″W x 15-3/4″D x 21-1/4″H, 2 available. WS2615

2002 Tuftco 5/64th gauge single end servo scroll sample machine

Tuftco 5/64 th gauge single end servo scroll sample machine. 5/32 nd gauge front and rear. YOM 2002. WS2561

Tuftco 5/64th Ultraweave single end servo sample machine

Tuftco 5/64 th Ultraweave single end servo sample machine. Loop on front. Cut-loop on rear. WS2562.

Dornier HTV 8J Weaving

• Manufacturer: Dornier
• Model: HTV 8J

Good condition Dornier HTV 8J Weavings available between 1988 and 2006 years. Located in Netherlands and other countries. Click request price for more information.