Used Processing in Hamburg, Germany

1991 Pedrini M 580 GR-
- Manufacturer: Pedrini
Block cutter - SCALETTA Motor, rated power – 190 kW. 32 vertical discs (cutting thickness 12 mm) Min. disc, d: 1000 mm Max. disc, d: 1600 mm Shaft D: 110 mm; shaft length: 600 mm Diameter of the horizontal disc –...
Hamburg, Germany
2010 BIDESE Gold 14 V-
- Manufacturer: Bidese
Bidese Multiwire Number of ropes: 14 Rope length: 21,040 mm, rope diameter 7.3 mm Engine power: 75 KW Cutting dimensions: 3,600x2,100 mm Accessories: Block trolley Condition of the machine: Good Weight: 23.5 t Po...
Hamburg, Germany
2006 PELLEGRINI POLYWIRE 5.9 - Nr.1
- Manufacturer: Pellegrini
- Model: Polywire
Multiwire with 9 diamond wires Rated power: 37/50 kW Voltage: 380 V – 50 Hz Cutting dimensions: 2,100 mm (height) x 3,500 mm (length) Wire length: 24,500/25,400 mm Wire thickness: max. 8.3 mm Water consumption: 7...
Hamburg, Germany
2019 PTM Pieropan Telaio-
- Manufacturer: Pieropan
Special gang saw Usable cutting length: 3500 mm Usable cutting height: 2200 mm Usable cutting width: 300 mm Maximum number of saw blades: No. 4 (or No. 5 with tension reduced by 20% for a total of 36 tons) Saw bl...
Hamburg, Germany
2009 Omag Blade NC 700-
- Manufacturer: Omag
CNC bridge saw with 5-axis head 1st bridge: 5-axis saw 2nd bridge: Vacuum suction cup for unloading Saw blade diameter 700 mm Y-axis approx. 15,000 mm X-axis 4,000 mm Z-axis 300 mm Underfloor saw NUM CNC control ...
Hamburg, Germany
2007 GMM Litox-
- Manufacturer: GMM
- Model: Litox
5-axis bridge saw monoblock - steel walls (no need to build concrete walls) Tiltable head (5 axes) from 0° to 90° ø saw blade 825 mm Main motor 30 HP Variable speed drive (inverter) Complete with automatic progra...
Hamburg, Germany
2009 MEC C-400-90T-
- Manufacturer: MEC
Stone splitting machine 90 tons never used. Includes conveyor belt length 3 meters. Length of the splitting knife: 320 mm Splitting height: 400 mm Splitting force: 90 tons Maximum working pressure: 315 bar Upper ...
Hamburg, Germany
2000 CMPI ANTARES 2D+8A/800-
- Manufacturer: CMPI
- Model: Antares
Calibration and polishing machine for marble 2 calibration heads 8 polishing heads Max. working width: 800 mm Max. working thickness: 100 mm Min. working thickness: 10 mm Voltage: V/Hz 400/50 Calibration spindle ...
Hamburg, Germany
2022 Fravizel Lynx + Halley MFCR 55
- Manufacturer: Fravizel
Mobile diamond wire saw on crawler undercarriage Built in 2022, start up in 2023 55 KW motor The upper rails are used for cutting blocks or walls. The wire saw moves along the approximately 8,000 mm long green un...
Hamburg, Germany
2007 Donatoni QUADRIX Top 1100
- Manufacturer: Donatoni
- Model: Quadrix
CNC machining center with 5 interpolated axes CAD/CAM software WCAM Maximum saw blade diameter: 1,100 mm Z-axis travel: 800 mm Motor: 30 hp – 22 kW with ISO 50 taper, including frequency converter 0–180° rotatabl...
Hamburg, Germany
2007 GMM Litox 38-
- Manufacturer: GMM
- Model: Litox 38
CNC bridge saw with 5-axis head Saw blade diameter ø 825 mm Tilt table Main motor power 30 HP Variable speed drive (inverter) Tilt head (5 axes) from 0° to 90° Complete with automatic programs such as single cuts...
Hamburg, Germany
GMM Lexta 36 full-
- Manufacturer: GMM
- Model: Lexta 36
Bridge saw for granite - Refurbished with 6 months warranty. Installation and training can be carried out at an extra cost. Maximum horizontal stroke of the saw 3600 mm Maximum vertical stroke of the saw 420 mm M...
Hamburg, Germany
2010 MBD Lace 229/2-
- Manufacturer: Janssen Steintechnik
Calibration machine for slabs 2 calibration units Diamond tools per head: 24 Diamond tool width: 12 mm Rated power: 101 kW Voltage: 400 V – 50 Hz Usable working width: 300 mm – 2,100 mm Usable working thickness: ...
Hamburg, Germany
2002 SIMEC NT2/2M-
- Manufacturer: Simec
Block Cutter Maximum input block size: 2,300 x 3,400 x 2,100 mm Maximum number of vertical saws: 2 Maximum vertical saw blade diameter: 1,700 mm Minimum vertical saw blade diameter: 1,000 mm Maximum horizontal sa...
Hamburg, Germany
2020 Omag Area Cut-
- Manufacturer: Omag
5-axis CNC bridge saw with 5-axis head 100 hours of operation (as new) Siemens CNC control 1 vacuum cleaner for separating the workpieces is located behind the head R 1/2" connection in the motor shaft Max. saw b...
Hamburg, Germany