Processing » Coating & Laminating » Ohio

Search By Manufacturer

Search By Type

Building Filters

95

Used processing in Ohio, USA

  • Trusted Seller
    4'w X 4'l X 6'h

    4'w X 4'l X 6'h Electric Oven - DESPATCH

    • Manufacturer: Despatch
    • Model: RS-3

    MAX TEMPERATURE RATING 500F - 440V/3PH/26KW DOUBLE DOOR OPENING WITH PRESSURE LATCHES. HEATING ELEMENTS AND CIRCULATING FAN ARE MOUNTED IN A PROTECTED AREA BEHIND THE WORK CHAMBER. HEATED AIR IS CIRCULATED VERTI...

    Ohio, USA
  • Trusted Seller
    48"W x 30"L x 42"H

    48"W x 30"L x 42"H Electric Oven - DESPATCH

    • Manufacturer: Despatch
    • Model: V35STD

    MAX TEMPERATURE RATING 500F - 480V/3PH/16KW DOUBLE DOOR OPENING WITH PRESSURE LATCHES. HEATING ELEMENTS AND CIRCULATING FAN ARE MOUNTED BELOW WORK CHAMBER IN PROTECTED AREA. HEATED AIR IS CIRCULATED HORIZONTALLY...

    Ohio, USA
  • Trusted Seller
    POWDER BLASTER

    POWDER BLASTER

    • Manufacturer: Not Applicable

    POWDER BLASTER Powder Blaster

    Ravenna, OH
  • Trusted Seller
    Oerlikon Balzers Coating System, Type

    Oerlikon Balzers Coating System, Type INUBIA B6.1

    • Manufacturer: Oerlikon - Leybold

    Oerlikon Balzers Coating System, Type INUBIA B6.1 Used Oerlikon Balzars coating system, type INUBIA B6.1 / 17AAU00035, designed to metalize plastics parts in compliance with REACH, 3 phase, 400/230 volt, 76 amps,...

    Cleveland, OH
  • Trusted Seller
    65"W x 22'L x 86"H

    65"W x 22'L x 86"H Electric Oven - Jackson Oven Company

    • Manufacturer: Jackson Ovens

    MAX TEMPERATURE RATING 500F - 240V/3PH/50KW DOUBLE DOOR OPENING WITH PRESSURE LATCHES. ROOF MOUNTED HEATING ELEMENT CHAMBER WITH CIRCULATING FAN & POWER EXHAUST. HEATED AIR ENTERS WORK AREA VIA DUCT WORK ON BOTH...

    Ohio, USA
  • Trusted Seller
    8'W x 22'L x 6.5'H

    8'W x 22'L x 6.5'H ELECTRIC OVEN - GEORGE KOCH

    • Manufacturer: Koch

    MAX TEMPERATURE RATING 500F - 240V/3PH DOUBLE DOOR OPENING WITH PRESSURE LATCHES. ROOF MOUNTED HEATING ELEMENT CHAMBER WITH CIRCULATING FAN. HEATED AIR ENTERS WORK AREA VIA DUCT WORK ON BOTH INTERIOR WALLS AND R...

    Ohio, USA
  • Trusted Seller
    8'W x 12'L x 6.5'H

    8'W x 12'L x 6.5'H Electric oven w/ doors on both ends - DESPATCH

    • Manufacturer: Despatch

    MAX TEMPERATURE RATING 500F - 240V/3PH DOUBLE DOOR OPENING WITH PRESSURE LATCHES ON FRONT & REAR - ROOF MOUNTED HEATING ELEMENT CHAMBER WITH CIRCULATING FAN. HEATED AIR ENTERS WORK AREA VIA DUCT WORK ON BOTH INT...

    Ohio, USA
  • Trusted Seller
    Stainless Steel Inline Belt Washer

    Stainless Steel Inline Belt Washer

    • Manufacturer: Hurricane Systems

    2 Stage natural gas Stainless Steel washer w/ blow off zone at the end - Variable Speed Belt - Part opening: 24"w X 12"h - approximate OD: 8'w X 17' long - 5,000 lbs. - 480v/3ph - Digital Temperature Controls - 1...

    Ohio, USA
  • WAGNER EPG SPRINT X Powder

    WAGNER EPG SPRINT X Powder Coat Control Unit. 85-250VAC 40Watt

    • Manufacturer: Wagner

    The WAGNER EPG SPRINT X Powder Coat Control Unit is a powerful and efficient tool for your industrial painting needs. With an input voltage of 85-250VAC and a 40Watt output, this unit is perfect for applying powd...

    $2,800 USD
    Graytown, OH
  • Trusted Seller
    Cmi Coating Thickness Standard -

    Cmi Coating Thickness Standard - 219086

    • Manufacturer: CMI

    Used Name: Coating Thickness Standard | Arrival date: 10-06-2025 | Dimensions l x w x h (inches): 7 x 5 x 1 | Weight (lb.): 2 | Available quantity: 6

    $100 USD
    Euclid, OH
  • GUSMER GX-15 Mixing Head

    GUSMER GX-15 Mixing Head

    • Manufacturer: Gusman

    This is a GUSMAN GX-15 Mixing Head. Part No.: 257498. If you are searching for this item you know more about it than I do. All I can say is that it has been used and is untested. But, it is returnable if it d...

    $1,800 USD
    Oregon, OH
  • Trusted Seller
    3) 4'w X 15.5'l X

    3) 4'w X 15.5'l X 5'h Electric Ovens w/ doors on both ends - Jackson Oven Company

    • Manufacturer: Jackson Ovens

    3) IDENTICAL OVENS - MAX TEMPERATURE RATING 500F - 240V/3PH/30KW SINGLE SIDE SWING DOOR AT BOTH FRONT & REAR. ROOF MOUNTED HEATING ELEMENT CHAMBER WITH CIRCULATING FAN & POWER EXHAUST. HEATED AIR ENTERS WORK ARE...

    Ohio, USA
  • Trusted Seller
    2014 Gema OptiFlex Powder Coat

    2014 Gema OptiFlex Powder Coat Booth(4 OptiGun 2A Powder Guns & Optistar Control & Reclaim unit)

    • Manufacturer: Gema

    2014 Gema OptiFlex Powder Coat Booth(4 OptiGun 2A Powder Guns & Optistar Control & Integrated Dust Collection System) Mfg: Gema Model(s): Optiflex OptiGun Powder Coat Guns 4 Units Model Optistar Control Units ...

    Ottawa Hills, OH
  • BINKS,MODEL 41 11150,PUMP PROTECTOR NOS

    BINKS,MODEL 41 11150,PUMP PROTECTOR NOS

    • Manufacturer: Binks

    BINKS,MODEL 41 11150,PUMP PROTECTOR NOS(7-8-25)(22-B-3) What's Included? See photos. We try our best to provide full details of each item and any included accessories, but if it's not shown in the photos then it ...

    $225 USD
    Galion, OH
  • Binks,46-9700,97P Air Nozzle

    Binks,46-9700,97P Air Nozzle

    • Manufacturer: Binks

    What's Included? See photos. We try our best to provide full details of each item and any included accessories, but if it's not shown in the photos then it will not be included with the item. 30-Day Easy Returns ...

    $36 USD
    Galion, OH
23456

Overview

Coating and laminating machines are used in various industries to apply a layer of material onto a substrate, improving its durability, appearance, or functionality. These machines are essential in packaging, textiles, and printing industries, where they help create products with enhanced protective and aesthetic qualities. Coating can include adhesives, protective films, or decorative layers, while laminating involves bonding multiple layers together.

FAQ

What factors should I consider when buying a coating and laminating machine?

Consider the type of materials you will be working with, the machine's speed, the coating or laminating width, and the overall quality and reliability of the machine. Additionally, look for features like easy maintenance and user-friendly controls.

How do I ensure safe shipping of a coating and laminating machine?

Make sure to use a reputable shipping company that specializes in transporting heavy machinery. Ensure the machine is properly packed, secured, and covered to prevent any damage during transit.

What maintenance is required for coating and laminating machines?

Regular maintenance includes cleaning the rollers and other contact surfaces, checking and replacing any worn-out parts, and ensuring that all mechanical components are well-lubricated. Follow the manufacturer's maintenance schedule for specific guidelines.