Processing » Coating & Laminating » Laminating » Italy

Building Filters

15

Used controller in Italy

Trusted Seller
Manual Thermal Film Laminating Machine
- Manufacturer: BBS
YFM920 thermal film laminating machine is developed and designed by our company based on market demand and the advantages of similar products at home and abroad. Compact structure, small footprint, easy operation...
$41,783 USD
Get financing
Est. $786/mo
Bologna, Italy
Trusted Seller
Laminating FASLine Edge 1416
- Manufacturer: Lamina
Feeder of printed sheets with suction cup system from above, max stack height 1,600 mm. Bottom feeder with vacuum belts Glue spreading module Accurate register system and continuous “On The Fly” system (no front ...
Busto Arsizio, Italy
Trusted Seller
2007 Foliant 520 T
- Manufacturer: Foliant
FOLIANT 520 T -Semi automatic laminating machine year 2007 -Maximal Speed: single side 7 m/min. -Feeding System: Manual -Automatic sheet separator T 520 -Jogger in delivery -Paper Weight: 115–350 g/m² -Mai...
Italy
Trusted Seller
COUPLER C6ROdep
The simple, robust, easy-to-maintain laminating machine is intended for applications where high pressures and temperatures are important, while maintaining very low costs in relation to high productivity. It allo...
Monte Urano, Italy
2004 Tecnomac Tecnomac Evolution 76
- Manufacturer: Tecnomac
- Model: EVOLUTION 76
Hot Laminating Tecnomac Evolution 76 Year: 2004 Maximum format: 76 x 104 cm Minimum format: 21 x 21 cm Speed: 60 m/min Standard Equipment Oil recirculation calender Integrated reel lifting device Automatic sheet ...
Taurisano, Italy
Suretopic 520
Semi-automatic laminator. Ideal for print shops and print centers, this solution speeds up production processes and minimizes costs.
Rosà, Italy
Plasti 350 EVO
Useful light: 340 mm Paper inlet: 350 mm Paper weight: 120 - 500 g/m² Paper length: 200 - 999 mm Max speed: 7 m/min Max. temperature: 170°C Joining bar: yes, scratchproof Roller pressure: mechanical Automatic ove...
Rosà, Italy
Replas 520
Replas 520 is an electric trimmer. Possibility of output connection with Maplas 520 laminating line. Sequential cuts of: paper, polyester, encapsulated prints.Rating: 7/10 Adjustable speed Electric panel for prog...
Rosà, Italy
LM YFM 560
- Manufacturer: LM
Dry laminator, completely automatic, composed of sheet feeder, laminating unit with controlled temperature cylinder, trimming unit, yielding system to make the machined surface planar, circular blade cutting, tim...
Este, Italy
Graco Reactor E-20 for Polyurethane Foams
- Manufacturer: Graco
- Model: Reactor
The Graco Reactor E-20 is equipped with the most advanced material data control sensors and system diagnostics. It allows total control hardly found in other machines of similar use. It enables superior uptime wi...
Corigliano d'Otranto, Italy
2006 Ecosystem 102 modulo DRY
- Manufacturer: Ecosystem
Technical data: minimum sheet size: 25cm x 32cm maximum sheet format: 106cm x 142cm mechanical speed: 90mt/min maximum copies per hour: 10,000 size with operator platform: 780cm x 400cm weight: 5,300 kg vi...
Italy
Graco Reactor A-25 for Polyurethane Foams
- Manufacturer: Graco
- Model: Reactor
The Graco Reactor A-25 is a spray foam proportioner designed by Graco that offers the reliability expected on the job site. It maintains constant temperature control, even when spraying at maximum flow rates, res...
Corigliano d'Otranto, Italy
Graco Reactor 2 E-30 for Polyurethane Foams
- Manufacturer: Graco
- Model: Reactor
Electric metering machine for medium/high yield polyurethane foam application Graco Reactor 2 E-30 is an electric spray foam machine. It provides next-generation technology for spray foam insulation. Every featur...
Corigliano d'Otranto, Italy
Graco Reactor 2 H-40 for Polyurethane Foams
- Manufacturer: Graco
- Model: Reactor
Ideal for low- to medium-volume foam and roofing applications Graco's Reactor 2 H-40 provides superior power and even higher performance, using piping up to 125 m (125 ft) to ensure maximum output. In fact, thank...
Corigliano d'Otranto, Italy
Graco Reactor E-8p for Polyurethane Foams
- Manufacturer: Graco
- Model: Reactor
Graco Reactor E-8p is specially designed for new non-hot polyurethane foam formulations. It thus provides a proven air-tightness solution that is in demand by homeowners who want energy-efficient homes. In additi...
Corigliano d'Otranto, Italy

Overview

Laminating and coating equipment applies protective films, adhesives, or liquid coatings to substrates like paper, cardboard, plastics, textiles and metal foils. Common in packaging, printing, label and industrial finishing, machines range from roll-to-roll and sheet-fed laminators to extrusion, hot-melt and cold adhesive coaters. Buyers evaluate web width, line speed, temperature and tension control, drying/curing systems and rewinders to match throughput and material compatibility.

FAQ

What should I inspect when buying a used laminating or coating machine?

Check rollers and sleeves for wear, heater and control panels, pumps and metering systems, web tension systems, drive motors, and condition of entry/exit guides. Ask for recent service records and a live run test with similar materials.

How do I choose the right machine size and speed for production?

Match web width and maximum line speed to your highest-volume job, and ensure the machine’s heating/drying capacity and unwind/rewind sizes support your rolls. Leave some margin for future growth.

What electrical and utility requirements should I confirm?

Confirm voltage, phase and amperage, compressed air pressure/flow, steam or hot oil systems if used, and any cooling or ventilation needs. Verify site capacity before delivery.

How should laminators/coaters be shipped to avoid damage?

Use heavy-duty crating, secure movable parts, drain fluids, lock or remove delicate rollers, and work with carriers experienced in industrial web equipment. Consider partial disassembly and professional rigging.

Are spare parts and consumables easy to source for older machines?

Parts availability varies by make and age. Common items like rollers, bearings, adhesives, and heaters are usually obtainable, but custom doctor blades or obsolete controls may require aftermarket or refurbished solutions.

What routine maintenance keeps a laminator or coater reliable?

Regularly clean rollers and heaters, inspect seals and bearings, calibrate tension and metering systems, replace worn sleeves and belts, check electrical connections, and follow manufacturer lubrication and inspection intervals.