Processing » Coating & Laminating » Coating » Czech Republic

Search By Manufacturer

Building Filters

6

Used Coating in Czech Republic

  • Trusted Seller
    Nordson Sure Coat

    Nordson Sure Coat

    • Manufacturer: Nordson
    • Model: SURE COAT

    Depth 155 mm 1 Phase 50-60 Hz Height of manual gun: 254 mm | Max. length of manual gun: 438 mm | Max. reach of manual gun: 279 mm | Weight of manual gun: 560 g | Cable length: 6000 mm ( 4000 mm extension) | Heig...

    Brno, Czech Republic
  • 2011 HORIZON AFC 746F PFU

    2011 HORIZON AFC 746F PFU Complete rubber coating of cylinders with polyurethane!!!

    • Manufacturer: Horizon

    The top-of-the-line model AFC-746F sets entirely new standards for automation and power in B1 format combination folding machines. The AFC-746F is equipped with six parallel buckles and two cross knives and is op...

    Prague, Czech Republic
  • Trusted Seller
    2004 Powder coating line

    2004 Powder coating line

    • Manufacturer: EKOL

    Suitable for surface coating of aluminium profiles with max. dimensions 3500 x 1350 x 600 mm. Equipment: Degreasing chamber KOS 2 x 6 x 20 Passing dryer Traverser 2ks Coating chamber (scavenge power 10000 m3/h) H...

    Brno, Czech Republic
  • Trusted Seller
    2012 Flexilam S165

    2012 Flexilam S165

    • Manufacturer: Flexilam

    Diameter of cylinders: 140 mm | Distance between sides: 1800 mm | The width of the coating on the rollers: 1650 mm | Max. upper cylinder stroke: 40 mm | Machine dimensions: 2100 x 1240 x 500 mm

    Brno, Czech Republic
  • 2001 Laminating machine Super Combi

    2001 Laminating machine Super Combi 2000, laminator

      Laminating machine Super Combi 2000 Manufacturer: Nordmeccanica Model: Laminator Super Combi 2000 Type: Mod. 1300 Year: 2001 Materials: COATED MATERIALS (PRIMARY) BOPP 12-80 µm PETP 10-30 µm LDPE,LLDPE 60-200 µ...

      Běleč nad Orlicí, Czech Republic
    • Kronert kaschier maschine Laminators+ coating

      Kronert kaschier maschine Laminators+ coating machine

        including instalation

        Běleč nad Orlicí, Czech Republic

      Overview

      Coating and laminating machines apply liquid, film or adhesive layers to substrates like paper, film, foil, or textiles to add protection, appearance or functional properties. These systems range from simple laboratory coaters to high-speed web lines with drying ovens, metering rollers, gravure or slot-die heads, and unwind/rewind stations. Buyers look for coating type, width, speed, temperature control and ease of changeover to match production needs.

      FAQ

      What should I check when buying a used coating or laminating machine?

      Check coating method (slot-die, gravure, knife-over-roll), maximum web width, line speed, condition of metering/doctoring parts, control systems, and available spare parts. Request run sheets and maintenance records.

      How can I ensure safe shipping for a coating line?

      Disassemble into transportable sections, secure rollers and shafts, drain hazardous fluids, protect precision heads and electronics, and use flatbed or container shipment with crane loading and insurance.

      What regular maintenance keeps coating equipment reliable?

      Schedule routine inspection of rollers, bearings, seals, heaters and temperature controls; clean coating heads and pumps after runs; replace doctor blades and seals as needed; and keep electrical controls and calibration documented.