Used Saws

1989 Amada HK-800 Horizontal band saw

• Manufacturer: Amada
• Model: HK-800

Country: United States

W.F. Wells #9273 - W.F. Wells Band Saw #9273

• Manufacturer: W.F. Wells

W.F. Wells 17″ x 10″ Horizontal Band Saw, W-10-2A Inventory # 9273

Sampson MN150-10 Double 45° Miter Saw 10" Blade 1.5Hp Motor 230/460V 3Ph Notche

• Manufacturer: Sampson

Used, in Good Working Condition. Tested. Pneumatic air foot pedal controls. Motors are both wired for 480V 3 phase. This was setup to cut plastic window frames. If this item ships as Flat Rate Freight please see ...

CTD F426 Straight Cut-Off Saw 16" Blade 3450 RPM 5 Hp 3Ph Air Foot Control 90°

• Manufacturer: CTD

Used, in Good Working Condition, Tested OK. 90° cut only. Working height is 32-1/4" Foot pedal controls. Air powered. Auto oiler. Setup for metal cutting. Probably aluminum. 3450 RPM. 5Hp motor. 3Ph 230/460V. Man...

Roll-in Saw JM1220 - The Journeyman 1220 #8873

• Manufacturer: Roll-In

Roll-in Saw 12″ x 20″ Vertical Band Saw with Tilting Table, JM1220 Inventory # 8873 From the digital speed control to the calibrated gravity fed tilt-table, the “Journeyman 1220” sets the standard for versatility...

LESTHER JIH-20 COLD SAW

Imperial Metric Country: United States | Cutting angle: 45 - 0 - 45 DEGREE | Sawblade size: 20" X 1" BORE | Saw speed: 3,000 RPM | Motor: 7.5 HP | Worktable area: 36" X 25.5" | Worktable height from floor: 34.4" ...

2025 Indotech CNC 18 DC Smart saw 18" dual Column CNC bandsaw Like Amada, Behringer, Doall, Hyd-Mech, Kasto

• Manufacturer: Amada

Imperial Metric Cutting Capacity 16" X 16" Blade Speed 66 - 330 FPM Blade tension ...

1986 Hendrick SZ III-EFZ Panel Saw

• Manufacturer: Hendrick

Imperial Metric HP 7.5 RPM 1750 Voltage 220 3 Phrase Blade size 13 1/2 Arbor size 1" Blade Travel 67" Cutting Area 11' x 67"

WHIRLWIND 212R, CUT-OFF SAW WITH INFEED AND OUTFEED

• Manufacturer: Whirlwind

WHIRLWIND 212R, CUT-OFF SAW WITH INFEED AND OUTFEED S/N:, (230/460/60/3 electrics), H-2088 Standard Specifications: *Inquire for additional specifications*

Roll-in Saw DT1340 - Deep Throat Journeyman #8875

• Manufacturer: Roll-In

Roll-in Saw 13″ x 40″ Vertical Band Saw, DT1340 Inventory # 8875 “The Deep Throat Journeyman” is designed for large jobs that require large levels of complexity and accuracy. This saw has the strength of our othe...

2004 Marvel/Spartan Circular cols saw for steel

• Manufacturer: Marvel

Blade diameter 315mm/ 12.4" Capacity 3.5" Tube Capacity 3" Solids Miter degree 45" L/R Motor power 1.75/ 2.5 HP Motor RPM 830/1740 Voltage 460 V Vise opening 6" Dimensions 3' x 3' x 6" Weight 630 lbs.

18" x 22" DOALL TM-1822 Vertical Saw

• Manufacturer: DoAll
• Model: TM-1822

DOALL VERTICAL MODEL TM-1822 Throat: 18" | Work height: 22" | Power: 5hp | Blade width: 1.25" | Blade length: 196" | Weight approx. (lbs.): 2,800 lbs | Electrics: 480V/3PH/60H

1992 Trennjaeger TS-3 Automatic Traversing Cold Saw ()

• Manufacturer: Trennjaeger

Trennjaeger TS-3 Automatic Traversing Cold Saw (1992) Work piece width 39.7" Workpiece height 11.81 Total power requirement 25 HP Motor power, 8 HP The industrial saw in the H-beam design from Trennjaeger has a ...