Used Saws

Trusted Seller
SKIL SAW MACHINE KIT LEGEND !
- Manufacturer: SKIL
SKIL SAW MACHINE KIT LEGEND. BRAND:SKIL COLOR: BLAC7-1/4 (184 MM) CIRCULAR SAW HP: 2.4 VOLTS: 120 Hz: 25-60 AMPS:11 COMES WITH EXTRA BLADE ID:300830 TAX IS NOT INCLUDED IN PRICE TAMBIEN HABLAMOS ESPAÑOL USED...
$75 USD
New York, USA
Trusted Seller
20" X 21" Do All Model TF 2021-NC Tilt Frame Vertical Band Saw
- Manufacturer: DoAll
- Model: TF-2021NC
GENERAL SPECIFICATIONS Capacity20” X 21” Capacity at 45 Degrees 14” X 20” Blade Speeds 50 to 300 FPM Blade Size 192” X 1 1/4” Head Feed Rate 0-12 IPM EQUIPPED WITH Hydraulic Head Tilt Automatic Belt Tension Coola...
Milwaukee, WI
12'' Eisele #VMS1PV Cold Saw 40/80 RPM Cutting Speeds 230V/3/60
- Manufacturer: Eisele
- Model: VMS
Eisele 12'' Cold Saw Machine No. 81852 Model #: VMS1PV Date of Mfg: 1985 230V, 3 ph RPM Cutting Speeds: 40 / 80 RPM Manual Vise
$1,950 USD
Cedarburg, WI
Model 10-1030 Chop Saw
16 x 8 door opening 5″ clearance from left side of blade 5″ clearance from right side of blade 4″ clearance under blade before chop
Posen, IL
Jet CS-315 Metal Cutting Cold Saw
- Manufacturer: JET
- Model: CS-315
Cutting Capacity: Round at 90°: 3.5" (tube), 2" (solid) Round at 45°: 3.5" (tube), 2" (solid) Rectangle at 90°: 3.2 x 3.2 (tube), 4 x 3.2 (solid) Rectangle at 45°: 2.6 x 2.6 (tube), 3.2 x 2.6 (solid) Square at 90...
Chicago, IL
Jet CS-275 Metal Cutting Cold Saw
- Manufacturer: JET
- Model: CS-275
Cutting Capacity: Round at 90°: 3.3" (tube), 1.5" (solid) Round at 45°: 3.3" (tube), 2.5" (solid) Rectangle at 90°: 3.1 x 2.0 (tube), 3.1 x 2.0 (solid) Rectangle at 45°: 2.2 x 2.0 (tube), 2.2 x 2.0 (solid) Square...
Chicago, IL
Trusted Seller
Auction
DoAll C916S Horizontal Band Saw S/N 529-081
- Manufacturer: DoAll
- Model: C-916S
DoAll C916S S/N 529-081, Horizontal Band Saw, 9" x 16" Capacity, 45 to 90 Degree Swivel, 50-400 FPM Blade Speed, (2) 16" Roller Feed Conveyors
Fort Lawn, SC
Visit Auction Website
Trusted Seller
1968 DoALL 1612-0 Vertical Band Saw - LMC #51481
- Manufacturer: DoAll
- Model: 1612-0
Year Built - 1968 Serial No. 277-68215 SPECIFICATIONS: Table Tilt, Manual: EQUIPPED WITH: 1-1/2 HP 3/60/220-400 Volt Blade Drive Motor and Electrical Controls Built-in Butt Welder, Grinder and Shear Dual Range Tr...
Lincolnshire, IL
Trusted Seller
DoALL Vertical Contour Band Saw
- Manufacturer: DoAll
“USED, IN NICE CONDITION. IT HAS RUST, SCRATCHES, WAS IN WORKING CONDITION WHEN TAKEN OUT OF SERVICE. SEE PICTURES ATTACHED” DoALL Vertical Contour Band Saw DoALL Vertical Contour Band Saw The DoALL Vertical Cont...
$5,900 USD
Get financing
Est. $116/mo
Fleetwood, PA
Jet JF225 Portable Metal Cutting Cold Saw
- Manufacturer: JET
Cutting Capacity: Round at 90°: 2-1/2", Round at 45°: 2" Rectangle at 90°: 2-1/2 x 2-15/16" Square at 90°: 2-1/4 x 2-1/4" Blade Size: 225mm x 32mm x 2mm Blade Speed: 52 RPM Maximum Vise Opening: 2-3/4" Motor: 1 H...
Chicago, IL
Baileigh BS-250 or 260 Swivel-Head Horizontal Band Saw
- Manufacturer: Baileigh
- Model: BS-250
BS-250: swivel vise, 110 volts, 1 phase BS-260: swivel head, 220 volts, 1 phase. Cutting Capacity:@90°: 8.75" Round, 10 x 4" Flat Bar@45°: 6.5" Round, 5.5" Square Blade speeds: 66 to 280 fpm variable Blade width:...
Chicago, IL
AMADA HA250W Automatic Horizontal Band Saw
- Manufacturer: Amada
- Model: HA-250W
Cutting Capacity Round (dia.): 0.5" - 10" [13 - 250mm] Cut Capacity Rectangle (W x H): 12" x 10" [300 x 250mm] Work Load Capacity: 3307 Lbs. [1500 kg] Cutting Control: Oil pressure flow control valve Main Split V...
Chicago, IL
Trusted Seller
1997 Emmegi Model 500 SCA Single Head Rising Blade Automatic Cut Off Saw ()
- Manufacturer: Emmegi
Emmegi Model 500 SCA Single Head Rising Blade Automatic Cut Off Saw (1997) Specifications and Equipment Detail: Single-head, rising blade cutting-off machine, with left loading side, able to perform cuts from 20 ...
Elk Grove Village, IL
2011 Kasto Twin A2 Saw
- Manufacturer: Kasto
- Model: Twin A2
The 2011 Kasto Twin A2 Saw is a high-performance automatic bandsaw designed for precision cutting in industrial environments. With a cutting capacity of 10.24 inches for round stock and 12.6 x 10.24 inches for re...
Schaumburg, IL
Vertical Tiltable Head Double Miter Band Saw
- Manufacturer: Baxter Verticut
- Model: 500MV
VERTICUT 500MV Cuts up to 18" wide x 25" high stuctural beams or 18" diameter pipe. VERTICUT 360MVC Cuts up to 14" wide x 17" high stuctural beams or 14" diameter pipe (12" at 45°). Verticut: The sawing head o...
Chicago, IL
Amada V-400 Saw
- Manufacturer: Amada
- Model: V-400
Good condition Amada V-400 Saws manufactured in 1967. Located in USA and other countries. Click request price for more information.
USA