Machine Tools » Saws » Circular Saws

Search By Manufacturer

Search By Country

Building Filters

1640

Used Circular Saws

  • Revolution Machine Tools S-SMART HSC™

    Revolution Machine Tools S-SMART HSC™ 4

    • Manufacturer: Revolution Machine Tools

    Automatic Servo Feed Cold Saw Round Cutting Capacity 0.8″ – 4″ -Mass production in continuous operation is done by S-SMART HSC™ Series Cold Saws, when producing cut-off pieces of steel and non-ferrous metals. The...

    North Salt Lake, UT
  • Revolution Machine Tools S-GENIUS HSC™

    Revolution Machine Tools S-GENIUS HSC™ 6

    • Manufacturer: Revolution Machine Tools

    Automatic Servo Feed Cold Saw Round Cutting Capacity 1.8 – 6″ -Mass production in continuous operation is done by S-GENIUS HSC™ Cold Saws, when producing cut-off pieces of steel and non-ferrous metals. They are d...

    North Salt Lake, UT
  • Trusted Seller
    Ryobi CSB144LZ, 7-1/4" Circular Saw

    Ryobi CSB144LZ, 7-1/4" Circular Saw ALL LOTS ARE SUBJECT TO THE BULK BID LOT 400

    • Manufacturer: Ryobi

    Ryobi CSB144LZ, 7-1/4" Circular Saw ALL LOTS ARE SUBJECT TO THE BULK BID LOT 400

    Modesto, CA
  • Revolution Machine Tools S-SMART HSC™

    Revolution Machine Tools S-SMART HSC™ 3

    • Manufacturer: Revolution Machine Tools

    Automatic Servo Feed Cold Saw Round Cutting Capacity 0.8″ – 3″ -Mass production in continuous operation is done by S-SMART HSC™ Series Cold Saws, when producing cut-off pieces of steel and non-ferrous metals. The...

    North Salt Lake, UT
  • Revolution Machine Tools S-GENIUS HSC™

    Revolution Machine Tools S-GENIUS HSC™ 4.75

    • Manufacturer: Revolution Machine Tools

    Automatic Servo Feed Cold Saw Round Cutting Capacity 1.5″ – 5″ -Mass production in continuous operation is done by S-GENIUS HSC™ Cold Saws, when producing cut-off pieces of steel and non-ferrous metals. They are ...

    North Salt Lake, UT
  • SCOTCHMAN 350NF/PK/PD

    SCOTCHMAN 350NF/PK/PD

    • Manufacturer: Scotchman
    • Model: 350NFPKPD

    Scotchman CPO 350 NF PKPD Equipped with: Infeed Conveyor **BUYER RESPONSIBLE FOR VERIFYING SPECIFICATIONS & OPTIONS** | Blademaximum diameter: 14" | Low speed: 1,500 RPM | High speed: 3,000 RPM | Motor: 2.5 HP ...

    Phoenix, AZ
  • Trusted Seller
    Pedrazzoli Super Brown 350/60 MP

    Pedrazzoli Super Brown 350/60 MP Manual Circular Cold Saw

    • Manufacturer: Pedrazzoli
    • Model: Super Brown

    Pedrazzoli Super Brown 350/60 MP Manual Circular Cold Saw The pneumatic vise, equipped with a rapid clamp feature and anti-burr device, ensures unwavering material support throughout the cut, resulting in impecca...

    Mukilteo, WA
  • Trusted Seller
    CS-350 Cold Cut Saw

    CS-350 Cold Cut Saw

    • Manufacturer: LINMAC

    The CS-350 manual cold saw is manually operated 350mm (14") circular cold saw. It's an inverter variable speed form 24 to 120 rpm, which suits most of cutting applications. The inverter gives the exact blade as...

    Calgary, Canada
  • 1992 Kaltenbach KKS 400 NA

    1992 Kaltenbach KKS 400 NA

    • Manufacturer: Kaltenbach
    • Model: KKS-400

    Automatic Circular Saw Kaltenbach KKS 400 NA Saw blade diameter: 400 mm | Mitre range: 0–180° | Drive performance: 1.8/2.7 kW | Saw blade feed rate: 0–1,000 mm/min | Apid advance/return movement: 3300 mm/min | Di...

    USA
  • Trusted Seller
    14" Pedrazzoli Super Brown 350/60

    14" Pedrazzoli Super Brown 350/60 MP Cold Saw W/ Pneumatic Vise

    • Manufacturer: Pedrazzoli
    • Model: Super Brown

    Pedrazzoli Super Brown 350/60 MP Manual Circular Cold Saw The pneumatic vise, equipped with a rapid clamp feature and anti-burr device, ensures unwavering material support throughout the cut, resulting in impec...

    Mukilteo, WA
  • 2010 BAILEIGH CS-275M

    2010 BAILEIGH CS-275M

    • Manufacturer: Baileigh
    • Model: CS-275M

    2010 Baileigh Industrial CS-275M Cold Saw with 11" Blade **BUYER RESPONSIBLE FOR VERIFYING SPECIFICATIONS & OPTIONS**

    Phoenix, AZ
  • 2007 THOMAS DAKE 350ST/SA

    2007 THOMAS DAKE 350ST/SA

    • Manufacturer: Dake
    • Model: 350SA

    2007 Thomas Dake 350 ST Manual Circular Cold Saw / Cutoff **BUYER RESPONSIBLE FOR VERIFYING SPECIFICATIONS & OPTIONS**

    Phoenix, AZ
  • VERTICAL SAW - MILWAUKEE

    VERTICAL SAW - MILWAUKEE

    • Manufacturer: Milwaukee

    PART: 12268 - VERTICAL SAW - MILWAUKEE USED - VERY GOOD CONDITION USED APPROXIMATELY 20 TIMES ONLY 1 CIRCULAR SAW INSTALLED MOTOR 3-1/4 HP, 120V, 6,300 RPM, 15A Technical Specs - Amps @ 120V15.0 - RPM No Load5800...

    Chihuahua, Mexico
  • CIRCULAR SAW SHARPENING MACHINE

    CIRCULAR SAW SHARPENING MACHINE

    • Manufacturer: Chicago Electric

    CIRCULAR SAW SHARPENING MACHINE - CHICAGO ELECTRIC SHARPENS SAWS DIAMETER 3-1/2" - 15-3/4 120V 3800 RPM INCLUDES SHARPENING STONE FOR TUNGSTEN CARBIDE AND STEEL TIPS

    Chihuahua, Mexico
  • CIRCULAR SAW - 1 BLADE

    CIRCULAR SAW - 1 BLADE - DIEHL

    • Manufacturer: Diehl

    PART: 12212 - CIRCULAR SAW - 1 DISC - DIEHL USED - GOOD CONDITION MAIN MOTOR: 15 HP, 230/460V, 3 PHASES, 60 HZ

    Chihuahua, Mexico
2728293031

Overview

Circular saws are powerful cutting tools equipped with a toothed or abrasive disc or blade that rotates around an arbor. They are commonly used in woodworking, metalworking, and construction for making straight or angled cuts in various materials. Their portability and precision make them an essential tool for both professional contractors and DIY enthusiasts.

FAQ

What should I look for when buying a used circular saw?

Check the condition of the blade, motor, and overall build. Look for any signs of wear or damage, and ensure the saw operates smoothly. It's also helpful to review the saw's cutting capacity and power specifications.

How can I safely ship a circular saw?

Ensure the saw is properly packed with protective materials to prevent damage during transit. Use a sturdy box and consider removing the blade or securing it to avoid movement. Label the package as 'fragile' and use a reliable shipping service.

How do I maintain a circular saw?

Regularly clean the saw, especially the blade and motor vents. Check and replace the blade as needed and lubricate moving parts. Refer to the manufacturer's manual for specific maintenance procedures and intervals.