Used Processing in Ontario, Canada

2020 Schenck Process 39HSER4

• Manufacturer: Schenck

• MEDIA AREA: 142.0 SQ FT • AIR-TO-MEDIA RATIO: 2.0 : 1 @ 275 CFM • VACUUM RATING: 17″ HG • CONSTRUCTION MATERIAL: 304 STAINLESS STEEL • EXTERIOR FINISH: 2B STAINLESS STEEL • INTERIOR WELD SURFACE FINISH: 32 RA M...

2021 Schenck Process 18HRT3 FILTER

• Manufacturer: Schenck

• VACUUM RATING: 17″ HG; TEMP RATING: 250 °F • 304 SS CONSTRUCTION & CLEAN AIR PLENUM • WELD FINISH: EXTERIOR CLEANED FREE OF SLAG; INTERIOR RA32 MAX • VALVE: ¾″ DIAPHRAGM WITH 4″ GAS HEADER • TIMER: NEMA 4X ENCL...

2021 Schenck Process BAG DUMP

• Manufacturer: Schenck

• INTEGRAL 19HSER2 FILTER WITH (2) POLYESTER CARTRIDGES • 304 STAINLESS STEEL CONSTRUCTION (ALL PRODUCT CONTACT AREAS) • CONTINUOUS WELDS: EXTERIOR CLEANED FREE OF SLAG; INTERIOR FINISHED TO RA32 MAX • REMOVABLE ...

2020 SCHENCK PROCESS FILTER ASSEMBLY

• Manufacturer: Schenck

COMPLETE WITH: -10 HP-575V-60-3 REGENERATIVE BLOWER. 3" NPT INLET AND OUTLET CONNECTIONS. CLASS I, GROUP D, CLASS II GROUPS F & G EXPLOSION PROOF MOTOR. BLOWER CASTINGS ARE ANODIZED FOR CORROSION RESISTANCE AND I...

2021 Schenck Process 39HSER4 FILTER

• Manufacturer: Schenck

• MEDIA AREA: 142.0 SQ FT • AIR-TO-MEDIA RATIO: 2.0 : 1 @ 275 CFM • VACUUM RATING: 17″ HG • CONSTRUCTION MATERIAL: 304 STAINLESS STEEL • EXTERIOR FINISH: 2B STAINLESS STEEL • INTERIOR WELD SURFACE FINISH: 32 RA M...

2021 Schenck Process HYGIENIC SURGE HOPPER

• Manufacturer: Schenck

• 4″ O.D. TRI-CLOVER FERRULE VENT STUB ON HOOD REAR • 304 STAINLESS STEEL CONSTRUCTION (ALL PRODUCT CONTACT AREAS) • FLANGED HOUSING DESIGN • CONTINUOUS EXTERIOR WELDS, CLEANED FREE OF SLAG & SPLATTER • INTERIOR ...

CALDWELL HYDRAULIC CATTLE PROCESSING CHUTE

• Manufacturer: Caldwell

Stainless Steel Frame on Casters, SS Shelf / Stand

Stainless Steel Frame on Casters, SS Shelf / Stand

Pneumatic Stuffing Machine

Pneumatic Stuffing Machine

WEXXAR-BEL mod. WF-20T Case Former, 600V, 60Hz, 1 PH, NEMA 12, ser. 4801

• Manufacturer: Wexxar

WEXXAR-BEL mod. WF-20T Case Former, 600V, 60Hz, 1 PH, NEMA 12, ser. 4801 Semi-automatic case former / box erector by WEXXAR PACKAGING. Pneumatic-assisted, touchscreen HMI controls, adjustable forming plates, and ...

JIF-PAK mod. PS-60 Pressure Stuffer

JIF-PAK mod. PS-60 Pressure Stuffer

SS Vacuum Tumbler

SS Vacuum Tumbler on SS Frame

FPEC mod. VT-85 Continuous Vacuum Tumbler

FPEC mod. VT-85 Continuous Vacuum Tumbler , series 2642, 304 stainless steel, inclined SS frame, adjustable feet, manway, vac, drain ports. Made in the USA. *This unit has been decommissioned and is ready for loa...